Mechanical Engineering Design

Engineer Garivalde Senia Dominguez

** ********* **., ******** *******, Diliman, Quezon City 1101, Philippines

email: ******************@*****.***

mobile: +63-905-***-****

Independent: works well with minimum supervision

Sociable: works well with others and does not afraid to ask question

Quick Learner: good with any kind of instruction

Well-taught in Mechanical Engineering: taken up units in Machin e Design, Refrigeration and Air Conditioning,

T hermodynamics and Powerplant, taught by competent professors in University of the Philippines.

OBJECTIVE An engineering position that will maximize my knowledg e and leadership skills in setting a long-

term career goal in machine design and mechanical innovation.

LICENSE

October 2014 Board Passer

Philippine Regulatory Commission, Licensure Exam for Mechanical Engineering

EDUCATIONAL ATTAINMENT

2009 – 2014 College of Engineering, University of the Philippines – Diliman

Bachelor of Science in Mechanical Engineering

Best in Automobile Engineering Design, Korean Automobile Testing and Research Institute

SY 2010 – 2011 First Semester, College Scholar (Dean’s List Equivalent)

SY 2011 – 2012 First Semester, College Scholar (Dean’s List Equivalent)

2008 – 2009 College of Arts and Science, University of the Philippines – Los Baños

Bachelor of Science in Statistics

SY 2008 – 2009 First Semester, College Scholar (Dean’s List Equivalent)

SY 2008 – 2009 Second Semester, College Scholar (Dean’s List Equivalent)

2004 – 2008 St. Paul School San Antonio, Nueva Ecija

Graduated School Valedictorian

Alfonso Yauchengco National Discipline Award (Check Granted)

School Publication Associate Editor

2007 National Press Conference Regional Delegate for Feature Writing Contest

Philippine Military Training, Executive Officer

Best in Mathematics, Best in Physics, Best in Social Studies

TRAINING

November 2014 – December 2014 ICAD AutoCAD 2015 Training Advanced 2D, 3D Drafting

June 2014 Microcadd AutoCAD Training. Basic 2D and 3D Drafting

June 2013 – November 2013 Automobile Design and Construction for Formula SAE conducted in the

University of the Philippines

April 2012 – May 2012 INQUIES Leadership Training. Kapuluan Study Center, Young Leaders

Seminar Titled “Leaders of Future Philippines”

July 2010 Cell Supervisor Leadership Training under University of the Phi lippines

Student Catholic Action

WORK EXPERIENCE AND RESEARCHES CONDUCTED

November 2013 – April 2014 Powerplant Student Researcher, Prototype Designer

University of the Philippines – Diliman (Prototype was evaluated in San Pedro, La Union Philippines)

Lead Researcher and Team Leader: Headed the research ab out Dolphin Type Wave Power Generator.

The goal of the research is to construct a non-conventional powerplant prototype to be used by five household

located in San Perdo, La Union.

Surveyed the municipality and conducted a proper justification for renewab le electricity demand.

Analyzed, computed and designed metal frame, four bar linkages, ram flywheel, gear trains that was

used as template for the construction of Dolphin Type Wave Power Generator.

Headed the manufacturing of all the element assembly of the prototype which includes welding,

lathe machining, brazing, gear milling and CNC machining.

November 2013 – April 2014 Automobile Chassis Designer

Korean Automobile Testing and Research Institute (KATRI) Songsan -myeon, South Korea

University of the Philippines – Diliman, Department of Mechanical Engineering

Selected by the Automobile Design Professor, Prof. Gerald Jo. Denoga, to be assigned as a str uctural

designer and was privileged to conduct computer aided design for chassis of a hybrid vehicle.

Conducted research for formula SAE (Society of Automotive Engineers) structural body design and

aerodynamic design, road traction, and force analysis of bearing in steady state conditions

Designed a light weight chassis with specific endurance using Creo/ProE (computer aided design).

Analyzed welds microstructure and stress analysis of weldments using Seam Weld Software

April 2013 Student Assistant Designer

University of the Philippines – Diliman, Department of Mechanical Engineering

Assisted Fluid Mechanics Professor, Prof. Paul D. Rodgers, for designing a vertical type wind

powerplant.

Used Creo 2.0 Simulate (Computer Aided Design for Dynamics) to create an environmental

simulation to analyze the mechanical motion of the elements of the prototype.

June 2013 – November 2013 Thesis for Hydraulic Ram Pump: Designer and Manufacturer

University of the Philippines – Diliman, Department of Mechanical Engineering

Team Leader: Headed the analysis and design for pipe structural stresses.

Research and implemented the manufacturing of one -way clip valve.

Conducted an experimental examination that allowed the pump to carry water to a building 50

meters high without using external source such a electricity.

March 2011 – July 2011, March 2012 – June 2012 Mathematics and Physics Instructor

PISARA Tutorial Center, Mandaluyong City

Instructor of Statistics and Trigonometry, and Classical Physics to prepare the students for highschool

entrance examination.

July 2009 – March 2010 Private Tutor of highschool student for subjects such as Mathematics,

Chemistry, General Science and Physics

SKILLS AND OTHER EXPERIENCES

Computer Aided Design:

PTC Creo 2.0/ Pro/ENGINEER (such as PTC Creo Parametric, PTC Creo Dire ct, PTC Creo Simulate,

PTC Creo Sketch, PTC Creo Layout).

Three- dimensional virtual prototyping skills, and Simulation of mec hanical elements such as

cam, gear, four bar linkage, bearing, spring and suspension, wind blade and water floater.

AutoCAD 2015 (skills acquired from training center such as ICAD and Microcadd)

Skills include advance drafting, schematic design for electricity, schematic design for

powerplant, floor planning, and mechanical design.

Automation and Control system

LabVIEW Programming and Instrument Control

Skills in schematic PID system programming and knowledge in servomotors as an application

for conducting an automated mechanism

Conducted a project in robotic arm with high precision of pic and place movement using PID

and LabVIEW programming and mechanical servo motors.

TriLoGi Programming Skills and Programmable Logic Control (PLC)

Knowledge in ladder programming for preparation of PLC contactor control system.

Conducted a prototype of a mixer with dynamic braking system, opp osite movement, and

variable speed using PLC.

Powerplant Design

Resource Extraction Design

Knowledgeable in designing fuel/energy resources, such as coal, bunker oil, natural gas, and

geothermal fluid, extraction, handling, transportation and storage, conversion and after

conversion technologies.

Demand Quantification

Conducted quantification of the demand and modeled a future consumption (such as residential

sector, commercial sector, transportation sector, industrial sector and agricultural sector)for fuel

energy requirements for power plant in Region IV -A.

Powerplant Selection Modeling

Knowledgeable in Eduard’s Criterion Model for matrix screening of region, resource, and

powerplant technology selection.

Equipment Selection and Design

Formulated schematic model of equipment, such as compressor, gas turbine, steam turbine,

condenser, pump, feedwater heater, etc., and computed values of thermodynamic properties,

work, heat, mass and efficiency.

Made a digital model to be able to predict changes in the sp ecifications and cost of equipment.

Powerplant Prototyping: The goal of the project is to compensate a 2 kilowatt demand

Designed and manufactured pyrolyser that will be used as a heat source of a Rankine Cycle.

Constructed a “mini-powerplant” with whole component included such as turbine, condenser

and pump.

Programming (All Proficient)

C++ Programming Language

MatLab (Numerical Analysis, Iteration, Schematic Programming, Tabulation and 3D Drafting)

CAMEL Heat Load Quantification

Adobe Photoshop

Microsoft Word, Microsoft Excel, Microsoft Powerpoint

EXTRACORRICULAR

December 2013 – April 2014 Board Member: University Student Council Election Head for

November 2012 – April 2013 Electrical and Electronics Engineering Institute

- Supervised the team of students to conduct a computerized election

and assisted the University Student Affairs Chairman for the

preparation and execution of the student election.

March 2010 – April 2013 Applicant Supervisor: University of the Philippines Student

Catholic Action (UPSCA)

- Conducted modules and talks that helped for the holistic formation of

the incoming member of the organization.

Liturgical Committee Member

June 2012 – August 2012 Mathematics, Statistics and Physics Instructor: College Entrance

June 2011 – September 2011 Examination Review held by UPSCA

REFERENCE

Dr. Joseph Gerard T. Reyes Associate Dean for Student Affairs, University of the Philippines,

College Engineering

Professor in Mechanics and Dynamics of Machinery, Department of

Mechanical Engineering

Address: University of the Philippines, College of Engineering Office of

the Dean

Contact: (E) *********@*****.***

(M) +63-915-***-****

Engr. John Carlo Garcia Thermodynamic Instructor: University of the Philippines, Department of

Mechanical Engineering

Contact: (E) *********@*****.***

(M) +63-917-***-****

Czerine Marie Esquejo Formation Director for Applicants

University of the Philippines Student Catholic Action

Contact: (E) ***********@*****.***

(M) +63-925-***-****

OTHER INFORMATION

Birthdate: April 26, 1991

Contact this candidate