Engineer Design
Resume:
Robert Oruche
Email: ************@*****.***
Aurora, IL, 60503
Cell: 224-***-****
OBJECTIVE
Former Scholarship student/ athlete looking to secure a position as an
Engineer that will utilize my education and skills.
PROFILE
1. Five years of experience in AutoCAD and SolidWorks. Two years of UG6-UG8
experience.
2. Three years of experience in FEA Analysis, ATEX and NACE applications.
3. One year of experience in TeamCenter software systems as well as IFS.
4. Two years of experience in AutoCad Inventor and AS400.
1. Five years of experience with ASME ASTM ANSI/API Standards; EN1092-
PN10/16 Flange Standards
5. Three years of experience with GD&T.
6. Five years of Project Management Experience and EPC Management.
7. Two years in the Oil and Gas Industry. 2 years of wastewater management.
8. 10 hour Occupation Safety and Health Training Course in General Industry
Safety and Health Procedures
9. Proficient in Microsoft Windows and Office Suite - Project, Word, Excel,
and Power-Point.
10. Experience with AVSS, IVMS, Development systems, Defensive Positions.
11. Approved Certification in Confined Space Training, Environmental
Awareness, Material Handling,
Nuclear Human Performance, as well as Safety Culture (SCWE)
2011
EMPLOYMENT HISTORY
L&J Technologies
Hillside, IL
Mechanical Design Engineer. (Direct Position) May 2013- Present
1. Developed and Designed Piping Gas Safety Equipment on top of Digester
Covers including Pressure/Vacuum Vents Breather Values, Flame Arresters,
3-way Safety Selector Valves along with Emergency Vent/Manhole Covers,
Drip Traps, Sediment Trap, Condensate Accumlator and Cover Position
Indications.
1. All projects are designed for In-line and End line piping solutions,
sizing, and layouts.
2. Piping criteria designed around ANSI/API, EN1092-PN10/16 mating
flanges. (125-150 lb FF/RF)
2. Designs are used to reduce emissions on the market.
3. Applications deal with biochemical substances and petroleum in
downstream applications. Wastewater management of projects.
4. AutoCad and Inventor - 3D program are used to create each design. AS400
is used on BOM side of each project.
5. Calculated Pressure /Vacuum set pressures, and load weights.
6. Gathered information and designed main line projects within the company.
Starting from conception of casting, plate or other materials; Designing
their original form; Creating the machined drawings with GD&T;
Developing welds if necessary, for each application.
7. Lead Engineer on Drip Trap, Sediment Trap and Conservation Breather
Valves product lines.
EMD-Electro Motive Diesel
Le Grange, IL
Mechanical Design Engineer (Contract Position) January 2012 -April 2013
12. Developed and Created a new Fire suppression system in our biggest
locomotive
13. Sized the fittings and conduit,conducted wiring path, and mounted from
existing components around its structure; various sizes in NPT (National
Pipe Thread), and Solenoid Ball Valves were used.
14. Fire suppression system included Junction boxes which also mounted on
existing hood structure
15. Helped design the whole Engine hood Structure and End Structure on a
Locomotive for Saudi Arabia.
16. Also helped build and design the large Cooling Hood Structure on the
Locomotive
17. Helped collaborate and design a Dynamic Brake Partition
18. Designed and helped develop an Engine Turbo Hood.
19. Helped design and Rebuild the structure in one of the Generator
Compartments.
20. Redesigned an Equipment Rack in the locomotive in order to achieve
clearance with new components in the locomotive.
21. Developed and Designed Pressure switches on a Flange Mount Brackets
inside the locomotive.
22. Developed paths for wiring and determined specific lengths to the
Pressure switches
23. Sheet metal (10-18 Ga. Thickness), Columns, and Beams were used in
numerous designs.
Triangle Packaging Company
Chicago, IL
Mechanical Design Engineer (Contract Position) February 2011- January 2012
24. Lead specific projects from conception to final acceptance testing at
our facility.
25. Designed Vertical Form Fill Seal Baggers, Combination weighers, and Bag-
in-Box systems.
26. Developed new innovative designs for numerous Cartoner machines that
were later manufactured into production.
27. Developed all designs in the following material: Stainless Steel,
Aluminum, anodized or nickel plated, urethane (plastic), and coal roll
steel. All materials were manufactured in the appropriate gauges for the
use of the project.
28. Used Helical Worm Gear Reducers, with brakes and without, for the
company on certain applications.
29. Designed and developed several Sprocket Assemblies for the Cartoner
machines as well as the projects pneumatics.
30. All designs were generated in Unigraphics and AutoCAD.
Nuclear Security Services Corp.-G4S
Willowbrook, IL
Nuclear Design Engineer (Direct Position) January 2010- February 2011
31. Designed Security Enhancements for Nuclear plants. (Defense Positions,
BBRE, Ballistic Steel, Alloy Steels, Plexi Glass, Supports)
32. Designed three different Development Systems that were later
manufactured into production.
33. Designed Physical Layouts for conduit placement in plants and for
outdoor installation
34. Designed and manufactured numerous Defense Positions in the USA using
AutoCAD, Solidworks and Micro Station.
35. Designed overall security systems/ enhancements and support
installation of systems at sites.
36. Lead specific projects from conception to final acceptance testing at
the site.
37. Drafted reports and other support documents required by our clients.
38. Conducted research for product production/technology selection.
Matrix Engineering Corp.,
Chicago, IL
Drafter and Design; (Internship) 2007-2009
39. Gained exposure and entry level experience in a professional
engineering environment. Valuable learning experience in the areas of
Engineering, Structural Design, and Drafting.
40. Assisted Structural Engineers and CAD Drafters in developing detailed
drawings, evaluation processing of blue prints, and problem solving of
the structural designs in Auto Cad.
41. Obtained sustainable knowledge of how an Engineering Firm is developed
within a structural/ business concept, and how the team of Engineers
work together to provide the best solutions.
Rock-Tenn Comp, Aurora, IL
Tech- 496 (Team Project), 2006
42. Designed a platform for Rock Tenn Company's slitter machine on the
ground floor. The design had three different sized stairways, one along
a catwalk which provided easier access walk over the slitter machine.
43. Provided digital images on Solid Works and Auto CAD, which was later
designed and built in the facility.
44. Developed a presentation displaying of the new design to the President,
CEO, and the Managers to the company in Isometric view, Standards view
and Exploded View.
45. Also displayed the Bill of Materials list and pricing of parts list in
the presentation which resulted in a savings of over $3,000 to there
original design.
46. The design I created were all based off of OSHA standards in there
facility.
EDUCATION
Northern Illinois University
Bachelor of Science, Industrial Engineering
December 2008
Northwestern University
PMI Certification (PMP)
Starting Spring 2015 January 5th.
Stanford University
Advanced Project Management
Start in Spring 2015
University of Alabama
Bachelor of Science, Mechanical Engineering
(PE License)
Starting Summer 2015
University of Nebraska
MBA
Starting Spring 2015
ACTIVITIES
Northern Illinois University Football Team
2003-2008
Scholarship Athlete
47. Two-time Letter Winner - Defensive End position.
48. Member of the College Football team - Ranked 10th in the nation (2003).
Volunteer Efforts
49. Greater Chicago Food Depository, Schaumburg, IL, Renaissance Hotel
2009
Participated
in organizing and distribution of food, which helped deliver over 35,000
lbs of food for the homeless in 600 Chicago land
locations.
50. Kishwaukee Education Consortium, DeKalb, IL
2004
Aided teachers by working with the children's reading and motor
skill activities.
Contact this candidate