Engineer Project
Resume:
PROFESSIONAL RESUME
of
TEODULO AYCO MAGDOZA
Singapore Address:
NV Residences Singapore 518194
Philippines Address:
Lot 55/56 Phase II Camella Homes Subdivision
Lawaan, Talisay City, Cebu Philippines. 6045.
HP : +65 96704165
HOME TEL NO. : +65 92230295
EMAIL : ********@*****.***
SINGAPORE PR : IC No. S2712414C
PASSPORT NO. : EB9516207
DATE OF BIRTH : 17 February 1965
PLACE OF BIRTH : Antequera, Bohol Philippines
NATIONALITY : Filipino
RELIGION : Roman Catholic
CAREER OBJECTIVE :
To pursue a challenging career in the field of Electrical / Instrument /
Fire & Gas/ Telecoms Engineering Technology and to enhance my knowledge in
the Construction, Mechanical Completion and Commissioning in Oil & Gas
field.
SUMARY OF QUALIFICATION:
> A total of 22 years of active work experiences in the field of
Electrical, Instrument and Telecoms Engineering Systems involving design,
estimation, supervision implementation, installation, inspection and
maintenance.
> Also with extensive exposure in the areas of installation, mounting,
inspection, operation and maintenance of Mechanical &
Electrical/Instrument system covering Voltage up to 22 KV and below 100v
to Power Substation, Distribution lines, Power Generators, Switch Gears,
Motors and Controllers, Load Center, HMI, DCS, LAN/WAN, Telephone and
Security Card Access System, CCTV System and Fire Alarm System,
VSAT,(PA/GA),& TVRO.
> Also with strong experience in the Air Conditioning and Mechanical
Ventilation System (HVAC, AHU,
RCU, FCU, Chiller and Cooling Tower) Fire Protection System and Boiler.
EDUCATIONALBACKGROUND:
1989. : University of Bohol (Philippines)
Bachelor of Science Degree in Electrical Engineering
License Electrical Engineer of the Philippines
1984-1985 : Peoples Electronics Servicing
Electronics Vocational Course (Basic Electronics)
SEMINARS/WORKSHOP:
Mar 07, 2015 :Apply Workplace Safety And Health in Process Plant (EVER
SAFE Consultants)
Jan 07, 2013 :Travel Safety By Boat OPITO (SMTC GLOBAL)
Mar 26, 2009 :Safety Orientation Course Oil/Petrochemical (NTUC
Singapore)
Oct 12, 2007 :Shipyard Supervisors Safety Course (NTUC Singapore)
May 06, 2006 :Shipyard Safety Instruction Course (NTUC Singapore)
Oct 07, 2004 :Module 3 Communicating for the Knowledge Economy:
Speaking &
Listening (British Council)
Jul 12,13 2000 : Productivity Management Course (NTUC Singapore)
Oct 22, 1994 :Medium Voltage Switchgears/Substation for Commercial &
Industrial Plants Seminar
Jul 02, 1994 :Fundamentals of Illumination Design for Commercial &
Industrial Buildings (IIEE Phils.)
Mar 27, 1993 :Technical Seminar on Ind. Motor Controllers Basic & Hi-
Tech (IIEE Phils.)
TRAININGS:
11/11/13 to 19/11/13 :ELECTRO PNEUMATIC INDUSTRIAL CONTROL (MFI
Technological Institute)
18/03/13 to 25/03/13 :PNEUMATIC INDUSTRIAL CONTROL (MFI Technological
Institute)
07/01/13 to 09/01/13 :Basic Offshore Safety Induction & Emergency
Training with HUET EBS OPITO (SMTC GLOBAL)
07/10/12 to 10/10/12 :SEAMAN'S RECORD BOOK AND CERTIFICATES OF DISCHARGE
(MPA Seafarers Management Department Singapore)
28/04/05 to 29/04/05 :Customized Fire Fighting & Breathing Apparatus
Course
(Singapore Aviation Academy)
10/02/04 to 16/02/04 :Metal Scaffold Erection (Building & Construction
Authority, Singapore)
05/0796 to 27/09/96 :Air-conditioning Technician Training Program
(Utopia-Aire Singapore)
04/05/89 to 05/06/89 :Advance Summer Camp Training (MS-43) CL 89, Cebu,
Philippines
SPECIAL SKILL:
> Hands-On on Personal Computer, Laptop Installation, Repair Both
Hardware & Software
> Basic Knowledge in AUTOCAD
> Proficiency in English.
PROFESSIONAL EXPERIENCE:
April 2014 to December 2014
BRUNEL INTERNATIONAL S.E.A. PTE LTD
RATU NUSANTARA FPSO (M3NERGY) Project - : Keppel Benoi Shipyard, Singapore
POSITION : E&I Project Engineer (Installation, Mechanical Completion &
Commissioning)
JOB DESCRIPTION
> Supervised & performed Installation of Electrical and Instrument
Equipment and Systems.
> Supervised & performed Mechanical Completion scope of works.
> Supervised & performed line & resistance check for all electrical,
instrument cables both for power cable, control cable and antennas cable.
> Supervised & carry out hot loop check & testing for Process
Instrumentation; E&I Systems, Fire & Gas and HVAC System.
> Preparation of Electrical & Instrument inspection test record (ITR'S) as
per specification.
> Study and review vendors drawings documents and ensure implementation in
compliance with specifications.
> Conduct Electrical and Instrument inspection in the installation,
modification and fabrication done by contractors.
> Prepare site inquiries for Electrical & Instrument fabrication
installation and issues within the contractors.
> Prepares project work schedules progress monitoring and daily/ weekly
progress report.
> Attend safety meetings with various disciplines for Permit to Work
discussion.
> Able to liaise with Consultants, Authorities, Builders & Subcontractors.
> Able to guide and lead a team of in house work force & contractors.
August 2013 to March 2014
PACIFIC ORIENTAL PTE LTD
TELOK B & DAMAR A PLATFORM EXXON MOBIL Project - : Malaysia (Offshore)
POSITION :E&I Commissioning Engineer
JOB DESCRIPTION
> Supervised & performed Mechanical Completion & Carry over scope of
works.
> Supervised & carry out hot loop check & testing for E&I System
> Supervised Pre-Com & commissioning of E&I System (FM200, F&G, HVAC,
RMU 13.8KV Switchgear
& LV Switchgear
> Calibration, simulation, troubleshooting, of all process instruments
used to measure, monitor
records and controls different process variables such as flow,
pressure, level, temperature
and others. Pressure/Level/Flow Transmitters.
> Supervised the testing, simulation of motor interfacing at HMI and DCS
such as motor status signal, start/ stop command, manual/auto status, and
PSD interlock. Simulation and cause and effect testing of all emergency
and shutdown devices.
> Supervised the punch list clearing & prepare ITR/Check Sheet for client
approval.
> Preparation of all required systems for the start-up of Well Heads.
> Support of the operation for start-up of the two Well Heads (A10 & A16)
May 2013 to August 2013
BRUNEL INTERNATIONAL S.E.A. PTE LTD
FPSO N'GOMA SBM Project - : Keppel Tuas Shipyard, Singapore
POSITION : E&I and Telecoms Commissioning Supervisor (Mechanical
Completion & Commissioning)
JOB DESCRIPTION
> Supervised & performed Mechanical Completion scope of works.
> Supervised & performed line & resistance check for all electrical,
instrument & telecoms cables both for power cable,
control cable and antennas cable.
> Preparation of Electrical & Instruments inspection test record (ITR'S) as
per specification.
> Study and review vendors drawings documents and ensure implementation in
compliance with specifications.
> Conduct Electrical and Instrument and Telecoms inspection in the
installation, modification and fabrication done by contractors.
> Prepare site inquiries for Electrical/Instrument/Telecoms fabrication
installation and issues within the contractors.
> Prepares project work schedules progress monitoring and daily/ weekly
progress report.
> Attend safety meetings with various disciplines for Permit to Work
discussion.
November 2012 to March 2013
PACIFIC ORIENTAL PTE LTD
TELOK A PLATFORM EXXON MOBIL Project - : Malaysia (Offshore)
(Posting in SEADRILL WEST LEDA)
POSITION : Electrical Commissioning Engineer (Mechanical Completion &
Commissioning)
(Permit To Work Coordinator) PTW
JOB DESCRIPTION
> Supervised & performed Mechanical Completion scope of works.
> Supervised & performed line & resistance check for all electrical cables
both for power cable & control cable.
> Supervised & performed resistance check for all motors prior to pre-
commissioning.
> Performed High-pot Test for MV cable, transformer, HV switchgear.
> Contact Resistance Testing for Bus Bars & ACB's
> Commissioning for MV, LV Switchgears
> Attend safety meetings with various disciplines for Permit to Work
discussion.
September 2012 to October 2012
TEEKAY NAVION OFFSHORE LOADING PTE LTD
TEEKAY FPSO CIDADE DE ITAJAI PROJECT - Jurong Shipyard, Singapore
POSITION : E&I Commissioning Supervisor (Fire & Gas System Repair, MC &
Commissioning)
JOB DESCRIPTION
> Supervised all the repair Works & MC of Fire & Gas System (Gas Detectors,
Flame Detectors, Smoke Detectors, Heat Detectors, O2 & H2S Detectors, ESD
Signals & Feedback, CO2, Fire Hydrant).
> Supervised & performed line check for all Fire & Gas & HVAC cables,
Performed resistance check for all cables.
> Supervised & performed functional check for all F&G Detectors, hot-loop &
functional check for all ESD signals and HVAC System function test.
> Supervised & performed as Boardman for Fire & Gas and HAVC System, cause
and Effects Testing for Fire & Gas System.
July 2012 to September 2012
EFAF ENGINEERING SERVICES
ABB HV/LV ELECTRICAL PROJECT - Island-wide, Singapore
POSITION : Electrical Engineer (Testing & Preventive Maintenance
Servicing)
JOB DESCRIPTION
> Transformers, HV and LV Switchboard Servicing, HIGH POT Testing, Partial
Discharge.
> IR Scanning for all ACB, CB, Bus Bars joints, Primary & Secondary
Injection Testing for Relays.
> Contact Resistance Testing for Bus Bars & ACB's, Performed resistance
check for all cables.
> Perform rack-in & rack-out of LV & HV Circuit Breakers and Isolator
Switch.
May 2012 to June 2012
OGRE PTE LTD
SBM FPSO CIDADE DE ANCHIETA PROJECT - Keppel Tuas Shipyard, Singapore
POSITION : E&I Comp-EX Inspector (Mechanical Completion, Commissioning)
JOB DESCRIPTION
> Detail visual inspection of all hazardous area, ex certification
instrumentation and to ensure installation and equipment meet relevant
standards IEC 60079-10.
> Visual inspection for complete and corrective installation of unit
control panel.
> System wiring matching, System cabinet wiring trouble shoot.
> In addition, cable schedule. Inspect electrical apparatus and Instruments
for hazardous area requirements like zone, category, class/division and
EPL category. Comp 'Ex'.
> Performed Equipment & System preservation using plastic, canvass, DENSU
Tape for enclosures.
> Curing of punch-list, daily job progress and coordinating with
engineering department for design modification methods of
protection(ATEX),and intrinsically safe hazardous area equipments
installations. Review document's prior to ELECTRICAL and INSTRUMENT
completion acceptance before START-UP. Reporting to the senior
construction manager.
January 2012 to March 2012
BW OFFSHORE SINGAPORE PTE LTD
BWO FPU JOKOTOLE PROJECT - Sembawang Shipyard, Singapore
POSITION : E&I Commissioning Engineer (Fire & Gas System Mechanical
Completion & Commissioning)
JOB DESCRIPTION
> Supervised & performed Mechanical Completion Works of Fire & Gas
System(Gas Detectors, Flame Detectors, Smoke Detectors, Heat Detectors,
O2 & H2S Detectors, ESD Signals & Feedback, CO2, Fire Hydrant).
> Supervised & Performed line check for all Fire & Gas cables.
> Supervised & Performed resistance check for all cables.
> Supervised & Performed functional check for all F&G Detectors.
> Supervised & performed Hot loop check and functional check for all ESD
signals.
> Supervised & Performed as Boardman for Fire & Gas System.
Feb 2011 to December 2011
ASIAPAC COMMISSIONING SERVICES PTE LTD
MODEC BP ANGOLA PSVM FPSO PROJECT-Jurong Shipyard, Singapore
POSITION : Senior Electrical Project Engineer (Installation, Mechanical
Completion & Commissioning)
JOB DESCRIPTION
> Supervised & Performed Mechanical Completion scope of works.
> Supervised & Performed Equipment & System preservation using plastic,
canvass, DENSU Tape for enclosures.
> Supervised Inspection, testing, site surveys all the electrical system.
> Supervised & Performed line check for all electrical cables both for
power cable & control cable.
> Supervised the testing of equipment and control systems Main
Switchboards, Emergency Switchboards, Perform IR Scan for all ACB, CB,
Bus Bars joints.
> Perform rack-in & rack-out of LV & HV Circuit Breakers and Isolator
Switch.
> Testing of LV & HV Power Cables using Megger Tester.
> Performed High-Pot Test, check operation of protection relays, testing
either Primary or Secondary Injection.
> Record all data during testing for ITR clearing.
September 2010 to January 2011
MEGGAWATTS ENGINEERING SERVICES PTE LTD
SEA DRAGON II SEMI-SUBMERSABLE PROJECT - Jurong Shipyard, Singapore
POSITION : E&I Project Engineer (Electrical & Instrument Installation &
Mechanical Completion)
JOB DESCRIPTION
> To carryout revision of drawing, job technical evaluation, planning,
supervision and co-ordination for, loop-check, pre-commissioning works.
> Preparation of Electrical & Instrument inspection test record (ITR'S) as
per specification.
> Study and review vendors drawing/ documents and ensure implementation in
compliance with specifications.
> Conduct Electrical and Instrument inspection in the installation,
modification and fabrication done by contractors.
> Prepare site inquiries for Electrical/Instrument fabrication installation
and issues within the contractors.
> Prepares project work schedules progress monitoring and daily/ weekly
progress report.
June 2010 to August 2010
WARTSILLA SINGAPORE PTE LTD
SBM OKHA FPSO PROJECT - Keppel Tuas Shipyard, Singapore
POSITION : E&I/Telecoms Supervisor (Telecoms & Instrument Inspector
and Mechanical Completion)
JOB DESCRIPTION
> Pre-commissioning and commissioning of the following FPSO
Telecommunication Systems: Metereological Systems (windspeed and
direction, cloudheight ceilometer, helideck motion sensor, stevenson
screen pressure, air and humidity sensor, current sensor), UHF system
field, UHF repeater Radio System, VHF Aeronautical Radio system, VHF
Marine Radio System, Non-Directional Beacon System, Closed Circuit
Television(CCTV) VSAT (stabilized antenna), B & D Local Area Network
(LAN), Wide Area Network (WAN) Public Address and General Alarm (PA/GA),
TVRO Entertainment System, Line Of Sight (LOS), PABX System, Inmarsat
System, Collision Avoidance Radar System, Gyro Compass System.
> Visual inspection for complete and corrective installation of unit
control panel.
> In addition, cable schedule. Inspect Telecoms apparatus and Instruments
for hazardous area requirements like zone, category, class/division and
EPL category. Comp 'Ex'.
> Curing of punch-list, daily job progress and coordinating with
engineering department.
> Review document's prior to TELECOMS and INSTRUMENT completion
acceptance before START-UP. Reporting to the senior construction
manager.
August 2009 to April 2010
PAN GREATWAYS ENGINEERING PTE LTD
BW OFFSHORE CASCADE & CHINOOK FPSO PROJECT
POSITION :E&I Project Engineer (Electrical & Instrument Installation &
Mechanical Completion)
JOB DESCRIPTION
> Supervise technical staffs and contractors activities for optimum
availability, efficiency for ongoing installations for E&I systems .
> Supervised, coordination, monitoring and implementation of all E&I
activities, addition/alteration, upgrading and/or refurbishment works of
the project.
> Performed mechanical completion inspection, Punch clearing, commissioning
of Ship's HVAC Air Conditioning System such as Chillers, Air-handling
Unit (AHU), and air Dampers. Assisted in final testing/simulation of HVAC
associated with the fire and gas systems cause and effects.
> Performed Instrument loop-checking, calibrations and commissioning of
both existing and newly installed instruments such as pressure, level,
temperature, flow transmitters(SMART Protocol instruments)and control
switches; inside the engine room, oil cargo pump room, topside modules,
and ship's forward rooms equipments; do tubing installation and also
pressure leak testing on supply and impulse line tubing's, loop testing,
and simulation/activation test from field instruments and unto DCS.
Performed testing and simulation on hydraulic system, cargo and ballast
tanks hydraulic valves.
> Attend to meetings and prepare monthly report for submission to client
and management.
> Supervised & Troubleshoot faults, undertake root cause analysis and
ensure system recovery.
March 2009 to July 2009
PAN GREATWAYS ENGINEERING PTE LTD
CHEVRON ORONITE EXPANSION PROJECT
Chevron Oronite Pte Ltd, Jurong Island Singapore
POSITION : M&E Project Lead (M&E Installation & Commissioning)
JOB DESCRIPTION
> Responsible for the project cycle initiation to closure and covering
functions as a Project Engineer.
> Execute Mechanical & Electrical works and Supervise and monitor all site
work.
> Liaise with Clients, Project Manager, sub-contractors and suppliers.
> Site technical, coordination and safety meeting HVAC; Mechanical &
Electrical & Other Discipline.
> Able to liaise with Consultants, Authorities, Builders & Subcontractors.
> Able to guide and lead a team of in house work force.
> Manage the overall project planning, propose and implement corrective
actions to ensure smooth delivery of project.
> Provide the project evaluation and project status to management on a
regular basis.
> Good knowledge in extracting VO's and preparing quotation.
September 2008 to February 2009
PAN GREATWAYS ENGINEERING PTE LTD
PROSAFE PETROBRAS FPSO CIDADE DE
SAO MATEOS PROJECT - Keppel Tuas Shipyard, Singapore
POSITION : E&I Senior Commissioning Supervisor (E &I Inspector MC and
Commissioning)
JOB DESCRIPTION
> Supervised & carry out hot loop check & testing for process instruments;
E&I System.
> Supervised & Carry out loop testing, calibration, simulation,
troubleshooting, of all process instruments used to measure, monitor,
records and controls different process variables such as flow, pressure,
level, temperature and others. Pressure/Level/Flow Transmitters.
> Supervised the Testing, simulation of motor interfacing at HMI and DCS
such as motor status signal, start/ stop command, manual/auto status, and
PSD interlock. Simulation and cause and effect testing of all emergency
and shutdown devices.
> Familiar in working with instruments use in Distributed Control System.
> Responsible for the DCS P&ID, I/O List, Shop Drawings, Instrumentation
Location Layout, Isometric Drawings Details for DCS.
> Prepare & sign for all the ITRs for the completed hot loop
check/functional check from CCR to Field Instrument, and submit to the
PIMS to clear PC ITR.
January 2007 to August 2008
PAN GREATWAYS ENGINEERING PTE LTD
CONOCO PHILIPS BOHAI FPSO PROOJECT
Sembawang Shipyard, Singapore
POSITION : Telecoms Lead Engineer(Project Management Team SSPL)
JOB DESCRIPTION
> In-charge of the TELECOM System Installation for the BOHAI FPSO Project
from Conoco Phillips. Responsible for the installation, carry over works.
> Perform weekly progress report & submit to the Manager.
> Review, check, approved & signed Inspection Test Record (ITR) sheet,
prepared by TELECOMS Supervisors. Coordinate and liaise with vendor and
contractor's representative in the field concerning work progress,
outstanding issues and other related matters.
> Supervise installations, pre-commissioning & commissioning of
Telecommunications equipment.
> Attend Tri-party inspection with client and contractors.
> Responsible for punch list items and mechanical completion work scope.
March 2005 to November 2006
PAN GREATWAYS ENGINEERING PTE LTD
SAKHALIN ENERGY INVESTMENT COMPANY
LNG PLANT CONSTRUCTION (CHIYODA-TOYO SAKHALIN DEPARTMENT)
POSITION : E&I Project Engineer (E &I Installation Testing &
Commissioning)
JOB DESCRIPTION
> To carryout revision of drawing, job technical evaluation, Planning,
supervision and co-ordination for, Loop check, Pre-commission and
commissioning.
> Conduct Electrical and Instrument inspection in the installation,
modification and fabrication done by contractors.
> Prepare site inquiries for Electrical/Instrument fabrication installation
and issues within the contractors.
> Assist client to modify system connections due to changes of design.
Responsible for scheduling and distribution of job orders.
> Compiling all as-built drawings and update latest revision as per
Engineering design for proper documentations and references.
> Attend daily meetings with client, subcontractors for work progress and
technical aspect.
August 2001 to February 2005
System on Silicon Manufacturing Company PTE LTD
WAFER FAB MANUFACTURING COMPANY
Pasir Ris Industrial Drive 1, Singapore
POSITION : Facilities Senior Associate Engineer (Facilities Maintenance
& Additional Installation Project)
JOB DESCRIPTION
> Operate and maintain facilities systems such as Control, Electrical, Air-
conditioning and Mechanical Ventilation Systems, Fire Protection &
Detection, Ultra Pure Water, Clean-room System, Industrial Waste
Treatment Plants and Chemical and Gas Systems for a Wafer Fabrication
plant.
> Review of system status in FMCS and alarm analysis, Trouble-shooting
Facilities alarm response & service normalization, Perform scheduled
preventive maintenance (PM).
> System calibration on a timely basis, Perform first line incident
handling, alarm response & breakdown repair works as well as
actively participate in ERT incident.
> Perform inspection rounds and manual data logging for facilities
systems, Perform facilities system isolation or lock out for after
office hours contractor works.
June 1996 to July 2001
UTOPIA-AIRE PTE LTD
M&E/SECURITY SYSTEM INSTALLATION & MAINT
Singapore Island-wide, & Regional
POSITION :Electronics & Air-Conditioning Engineer (Security System & Air-
con Installation & Maintenance)
JOB DESCRIPTION
> Lead a team of Technical Officers in performing installation T&C,
preventive maintenance and corrective maintenance of mechanical &
electrical systems such as air-conditioning equipment.
> Perform instrumentation set up and testing of refrigeration systems
> Perform service and maintenance of laboratory and test cell facilities.
> Lead and performed in calibration of test equipment, & particle counters
for Clean-room monitoring.
> Security System (Card Access System) Installation, T&C and maintenance.
January 1994 to April 1996
METRO (GAISANO) AYALA CENTRE
COMMERCIAL BUILDING PROJECT & MAINTENANCE - Cebu City, Philippines
POSITION : Engineering Department Head (Building Facilities
Installation & Maintenance)
JOB DESCRIPTION
> Supervise and direct the performance of repair jobs scheduled by Building
Maintenance Section Head. Evaluates and presents for interview request
for new equipment and recommends purchase of replacement parts.
Implement through assignment of tasks safety and fire prevention policies
and procedures.
> Review and check the completion of PMS with a regular report to the
Building Maintenance Section Head. Exercise effective control over tools,
materials and supplies through daily recording and monitoring. Provide
-on - the training and ensure subordinates compliance with established
policies and procedures. Evaluate performance, schedule training, leave,
and recommend action and movements of personnel.
> Review and ratify reports and communication prepared by subordinates,
materials and supply request. Prepare and submit for review budgeted
expenditures for headcount, services, training materials and supplies.
January 1991 to November 1993
SOCOR SHIPPING & CONSTRUCTION CORPORATION
YLLANA DREDGE PROJECT-Cebu City, Philippines
POSITION : Electrical Supervisor (Refurbish, Recondition & Repair
Testing and Commissioning)
JOB DESCRIPTION
> In-charge in all additional projects both Electrical, Mechanical and
Electronics works.
> Supervised hands-on in troubleshooting motor control devices, panel
boards of magnetic coupling with AC-DC power source, swing wench motor,
cutter motor, spud motor, ladder wench motor, synchronizing panel of 2-
600KVA GENERATOR SET.
> Supervised / Hands-on in rewinding governor motor, magnetic coil relay,
motor generator, 250KVA Generator (Caterpillar Brand). Excites 250KVA
Generator (Caterpillar Brand), 20KVA and 15KVA Generators (Denyo Brand)
Troubleshoot and repair all electrical and electronics equipment's /
devices.
> Routine preventive maintenance, servicing of all electrical switchboards,
switchgears, alarm & monitoring systems, fire detection and alarm
systems; generator automatic control systems; ships' automation &
instrumentation.
> Fault finding, rectification and repair works. Upgrading, modification,
extension and retrofitting works, Thermo-grapy works Supervised/Performed
INSTALLATION AND maintenance of HIROSS HIPOWER-T UPS SYSTEM.
REFERENCES:
Frederick Minoza
Manager/ SSPL - ***************@*****.***.** - +65 93514801
Felix F.Lanario
Company Site Rep -TOTAL CLOV Project - *****.*******@********.*****.***
-+65 98439488
Contact this candidate