Technician Electrical

John A. Saldana

**** ******** **., *** ****, CA *5132

Home 408-***-****, Cell 408-***-**** E-mail ****.***@*******.***

OBJECTIVE : Seeking a Senior Electrical/Mechanical R&D Manufacturing/or Senior Technician, Maintenance,

Equipment Development/Sr. Equipment/Manufacturing Technician where qualifications and experience

will be fully utilized.

SUMMARY OF QUALIFICATIONS

• Experienced technical professional involved in progressively more responsible

positions requiring electrical/mechanical aptitude, research and development, good communication &

training techniques

• Competent, attention to detail and pride in generating quality achievements

• Troubleshoot mechanical failures and electrical problems to the component level

• Read schematics, blueprints, and wiring diagrams

• Extensive knowledge of various electrical and mechanical tools and equipment

• Independent worker and effective team leader

• Successful in coordinating activities to increase team performance and motivation

• Well organized and able to manage time efficiently to exceed production goals

• Adept in managing stressful, sensitive issues in diverse environments

• Maintains detailed documentation through all phases of development, testing and

analysis

• Computer literate/Scada, RTU systems

• PLC Allen Bradley Micrologix 1200-1500

• Wiring the control box with pneumatic, calibration, airline/ oxygen/ water/ digital

pressure read out

• Laser/ optic alignment technician/ lasag laser/ power supply (pm) (CDRH) Center For Devices of

Radiologic Health. An arm of the FDA and (ANSI) American National Standards. Synrad Laser/Chiller set

up.

• Calibrate coherent power meter/beam position/DPSS Lasers- (Diode-pumped Solid-State-X-Y-Z tooling-

cleaning optics/ Q-switched laser/ safety classes given by (LSO)

• 35 KV Transformers

• Supervisor/Lead Experience/ Field Service Technician/ Installation of all capital

equipment

• Electronics degree completed

• Installations of all capital equipment/medical equipment

• Forklift knowledge

• HVAC Welding Certificate

• OSHA Safety

• GMP environment

• Wire harness/various cables/all types of wire gauges/various crimpers and tools/various sizes of

male/female pins/Assemble various Mechanical and Electrical complex Capital Equipment

• (FDA) (ISO) (GMP) (MSDS) (DHR) (QSR)

ACCOMPLISHMENTS:

• Recognized for loyalty & skill in completing projects on-time and under budget at Stanford Linear

Accelerator Center

• Received commendation for meeting all commitments in an extremely demanding quarter

• C3-ILEX Systems, RTU/Maintained HVAC, Welding in all in-house maintenance

• Field service, supply feedback to manufacturing engineers along with R&D for system performance as

well as customer feedback, keeping production up and running Guidant, Santa Clara, Temecula, CA.

PROFESSIONAL EXPERIENCE:

Depot Service Technican, Zonare,Mountain View,CA Jan 2014-March-2014

• Provided Technical/test/repairs of all Ultrasound systems and upgrades to customers request and needs

consisting of: uploading the new version of software, troubleshooting and rebuilding electro-mechanical and

machined components, bearings, gas shocksand printed circuit boards cabling shielding.

• Operated system software-using automated test equipment to test and debugged PWA’s to meet all service

repairs.

•

•

• Diagnosed mechanical, hardware, software and system failures.

• Communicated with field technicians by phone and emails and assisted them by analyzing problems, finding

solutions and guiding them through repairs.

• Worked along side of engineering department and Depot team to resolve any problems.

• Maintained data and input test results into Excel and Siebel.

Depot Service Technician, Agilent Technologies, Santa Clara, CA July 2008 – April 2013

Field Service to customers sites and out the U.S. and Europe/Asia. Service to clients in providing laboratory automation

solutions for drug and a range of other scientific research and development applications.

• Working in lab and repaired machines returned to Agilent for repair or preventative

maintenance

• Automated liquid handling devices. 384ST head 10uL 96LT 200uL head

• Mechanical, electrical, and software support

• Alignment / calibration/wet lab testing for all heads and syringe pipettes put all results

and data in Siebel or Excel.

• Wide range of subjects including servo controls & stepper motors, electronics,

pneumatics, optical sensors, and control software using windows operating systems.

• Updates to service and client database.

• Vertical pipetting (V-Prep)station for high accuracy, pipette heads for dispensing from

100nL to250uL

• Knowledge of all tools/test equipment/Robot arm/Bravos/Plate locs/Vcodes/Vstacks.

Technical Field Support Representative, NDS Surgical Imaging, San Jose, CA January 2008 – June 2008

• Provided phone and e-mail support to troubleshoot issues quickly and effectively to key customers of NDS

products.

Able to competently and quickly determine problem resolution using available tools and own knowledge of various inputs

and updated bios, and provide the highest level of customer satisfaction. Also able to clearly document and reproduce all

steps of problem resolution. Work closely with Quality and Engineering departments to improve product quality and

performance and assign RMA’s and coordinate incoming units with customers.

Process Solutions, Inc., Campbell, CA (contract work) October 2007 – Dec. 2007

Sr. Equipment/Manufacturing Technician

Build hydroxyl ion fog odor control systems and purifying water systems for various companies. Read and interpret

assembly and schematics, and diagram drawings, using current documentation procedures, build all anode/cathode cells

according to verbal and written instructions and by following drawings and diagrams, Bom’s, GMP. Wiring all electrical

boxes for each system an preparing all sub-assemblies, operate hand tools and power tools, final test on all systems with

current paper work and serial numbers to all systems.

Morgan Royce, Sunnyvale, CA (contract work) December 2006 – Aug. 2007

Electro-Mechanical/Equipment Technician

Build and test complex medical devices and motion equipment from schematics/engineering drawings such as

mechanical, pneumatic, PLC-1200-1500 Allen Bradley, point to point wiring. Electrical integration, build proto types, using

power tools and test equipment.

Facilities Tech Loral Space Systems March 2006 – Nov. 2006

Palo alto.CA.

• Perform work in many maintenance trades including carpentry, plumbing, machine and equipment repair, electrical,

sheet metal fabrication/welding and HVAC.

• Responsible for making routine, periodic or special inspections to determine repair and maintenance work necessary

to prevent breakdowns of facilities, machinery and equipment.

• Schedule approved maintenance, repairs and new construction.

• Tests, inspects, troubleshoots and repairs machines and equipment.

• Interpret blueprints, sketches, layouts, wiring diagrams, drawings and specifications. Respond to emergency

situations during off hours and weekends.

• Set-up and operate all tools and equipment necessary to perform assigned work.

• Perform preventative electrical lighting maintenance duties,support manufacturing labs,all offices,parking lots,street

lights,trouble shoot repairs as switches,sensors,lighting controls,wiring ballast and light fixtures,install new light fixture

also operate manual lift for those high repair lights and parking lamps.

Guidant, Santa Clara, CA Aug. 1999 – Oct. 2005

Senior Electrical/Mechanical R&D Technician, Maintenance, Equipment Development

Fabricated three different types of stent cutting lasers. Worked with engineering groups including process and design.

Assembled, tested from Electrical to Mechanical to loading the program from Laptop to (PLC) and setting the dipswitches.

Powering the system and troubleshooting if needed. Using all various electrical tools, to all sizes of hand tools from

standard to Metric and using Multimeter (fluke) for troubleshooting. Aligning optics on balloon laser welders supporting

laser department. Following all (FDA) standards from testing and qualifying all systems with detailed documentation

through all phases of development testing and analyzes data and write reports. Also travel to Temecula to lend technical

support to their equipment development group and maintenance group.

C3-ILEX Systems, Milpitas, CA 1994 – 1999

Senior Remote Terminal Unit Technician/Facilities Technician onsite

Responsibilities included building prototypes of (SCADA) Supervisory Control Analog Data Acquisition systems from

ECOs, verbal instructions, and wiring diagrams. Interfaced closely with Engineering/R&D to assist in designing electrical

and mechanical products. Provided customer service and training to ensure customer specifications were met. Reviewed,

evaluated, and determined quality of products prior to shipment. Developed and maintained an effective system to ensure

quality control. Trained and supervised new technicians as necessary. Also HVAC, maintain all maintenance of all building

maintenance complies with OSHA safety policies and regulations.

Stanford Linear Accelerator Center, Stanford, CA 1986 – 1994

Electrical/Mechanical Technician

Provided technical support by working directly from rough sketches and verbal instructions to upgrade various changes on

modulators to meet specifications and completion dates. Interacted continuously with Engineers to resolve critical issues.

Performed wiring and mechanical duties from conception to completion. Ordered all necessary electrical and mechanical

materials to maintain high quality standards. Maintenance of DC power supply 260 – 600 V, 60 CPS.

EDUCATION

Evergreen Valley College, San Jose, CA Electronics Degree Completed

Computer Business College Electronic Technician, San Jose, CA Electronics Technician Certificate

San Jose City College, San Jose, CA Electronics and Technical Management Courses

Completed Laser Safety Course, Knowledge of Class I, II, III

HVAC Certificate.

Contact this candidate