AFTAB MANZOOR
***************@*****.***
CAREER OBJECTIVE
The trust of career objective is to use my knowledge. Skill and wisdom in
the field of engineering & technology. So as to equip the organization with
theoretical and practical tools and techniques.
To seek responsible, challenging and rewarding position with a leading
organization that ensures long-term career development and growth
Opportunities.
Currently Working Experience
Plant FPF Operator
Now i am working in DAR PETROLEUM OPERATNG COMPANY (DPOC) in South Sudan.
DPOC is a joint venture of China National Petroleum Company (CNPC) with
Petronas Malaysia, SINOPEC, NILEPET and Tri Ocean Energy, which was erected
and commissioned by Higleig Dodsal Consortium and is involved in oil
exploration and production around South Sudan and separates oil with nil
BS&W and sending to port Sudan. (March 2014 to till now)
Previous Experiences And Descriptions
DCS OPERATOR
1: I have 06 month experience with Greater Pioneeer Operating Company
as Senior Operator after taking experience from Qadirpur Gas Plant
(OGDCL) Ghotki
(October 2013 to March 2014)
I am Familiar with DCS system.Good understanding & reading skill about
Isometrics, P&ID & PFD. I involved in commissioning, start-up, shutdown of
crude oil plant Screw pumps & rotary equipments,start up wells,flushing
jobs,.
. working with Greater Pioneer Operating Company Performing duties on
following sections.
Crude oil stabilization and storage.
Produced water and oil treatment and re-injection.
All necessary utilities i.e. Instrument air compressor,
For the separation & dumping of produce water / Crude oil use Demulsifier,Reverse Demulsifier,Max Solvent, PPD chemical.
Operation experience of crude oil stabilization by three phase separators, CPI, produced water tank, storage tank, skimmed oil tank and pumps
2: I have more then 07 years working experience in Qadirpur Gas
Processing Plant Ghotki (OGDCL). as Plant Operator (November -2005 to
September-2013)
.Job specification:
Worked Start with Qadir pur Gas Plant as Plant Operator after complete my
Study.
I am Familiar with DCS & PLC systems. Good understanding & reading skill
about Isometrics, P&ID & PFD. I involved in start-up, shutdown of gas plant
& rotary equipments, annual turn around
Developed the operating Procedures to ensure the smooth operation with
minimum downtime & safe execution of maintenance jobs.
MODICON PLC in installed for safe shut down & Start Up. It is accompanied
with a HMI screen for Operator assessment for Data Logging & set point
entry.
. working with Qadirpur Gas Processing Plant Ghotki (OGDCL) Performing
duties on following sections.
. A gathering system of slug catcher to collect fluids from the well
side.
. Conventional pretreatment system having filter Coalescer, Guard bed, Pre-
heater and Partical filter.
. 04 gas turbines of 10MW each used for driving 4 stages permeate
compressors (Nouvo Pignone) equipped with modern PLC control system
(Suvimac II) Micro Apace provided by Moore Product company.
. Separax Membrane System
. 04 Waukesha gas engines having capacity 735 KW each compressors
.. AUSTCOLD Propane Refrigeration Package Screw Compressor (HAWDEN).
Condensate stabilization and storage.
Produced water treatment and re-injection.
All necessary utilities i.e. Instrument air compressor,
05 Power Generators three are 825KVA capacity of each, and 02
generators are 1000 KVA capacity cooling towers etc.
For the separation & dumping of produce water / condensate Blow Case & Slug
Catcher is installed for Pre, Post & Inter-stage cooling of compressed
gases & Engine Coolant Fin-Fan Cooler is provided with the package.
Capacity: 25 mmsc f/d
Capacity enhancement activities of Qadirpur gas processing plant started
Jan-2003. The new plant taken from UOP utilized modern pretreatment
technology. Now the plant production is 500 MMSCFD. From this cooling
system we are decreasing dew point of feed gas for dehydration purpose.
I have also got knowledge about, Dryers with fluidized bed assisted by the
Blowers and centrifuges to separate water &condensate.
Summary of main duties and responsibilities
. Well experience in operation of natural gas purification from co2 by
membrane seprax system of UOP and H2S by memguard bed having cosmax
material and moisture adsorbing material (MG-3, MG-5, MG-6) Alumina
silicate adsorbant . Also operation of membrane pretratment
coalescing and chilling by propane circulation compressed by Waukesha
gas engine having capacity 735 kw driven screw compressors.
. Well experience of operation in gas compression unit from 1PSIG>
1000PSIG by four stages centrifugal compressors driven by Nuovo pignon
turbines of 10 MW and Man turbo turbines.
. Well experience of utilities operation including instrument air
compressors, Fire water diesel engines, caterpillar gas generators
of 975 kw capacity and fuel system .
. Operation experience of condensate stabilization by gas condensate
water separator, Flash separator, CPI, produced water tank, sand
filter, back wash tank and pumps
. Operation experience of Dehydration by TEG tri ethylene glycol
circulation to decrease dew point of natural gas and H2s scavenger
injection to reduce H2S from 40 PPM ---14PPM .
REPONSIBILTY AND SKILLS
I have experience of normal operation, abnormalities, N2 purging, Safe and
sound plant start up and shut down with emergencies.
I have experience and knowledge about safety precautions about plants.
To communicate and follow instructions of the Shift Controller to carry
out duties efficiently and safely.
To check process parameters and coordinate with the Senior Operator to
correct any deviations.
To carryout routine checks on equipment for abnormalities and inform
Superior for prompt action..
To sign work permits, follow on-going jobs and monitor Contractors
activities ensuring adherence to safety regulations and procedures.
To operate outside machinery and related equipment safely and
efficiently as per GASCO standards and instructions.
SAFETY TRAINING:
Fully aware about health, safety, environment and work permit procedure.
I am also a member of emergency response team & I am fully capable of using
all kinds of safety equipments. I have also attended the following
trainings and courses.
. Permit to Work System Handling / Auditing
. Safety equipments audit / use of safety equipments
SCABA Training.
. Fire fighting training and safety training .
. First Aid Training in Qadir pur Gas Field .
. H2S Alive .By OGDCL at PRTI (Petro Research and Training Institute)
. Implementation HSE policies, standards and procedures.
. Accomplishing HIRARC (Hazard Identification Risk Assessment and Risk
control) for process department.
. Working to develop HAZOP for shut down / start up of plant .
. Developed Emergency Response /Incident /Accident Reports
. Planning and preparation of JHA for critical jobs (Job Hazard
Analysis).
. Familiar with ISO-9001, ISO-14000 & OSHAS-18001 requirement
Computer Knowledge:
. Microsoft Word
. Microsoft Excel
. Microsoft Power Point
. Internet surfing
QUALIFICATION:
. METRIC (Science) from Multan Board in .
. F.Sc (Pre-Engineering) from GOVT.COLLEGE Jahanian .
01 Year Technical Trainng in Plant Operation from NFC Engineering Institute
Multan
PERSONAL DATA:
Name :
Aftab Manzoor
Father's Name : Manzoor
Ahmed
Date of Birth :
1st January, 1987
Marital Status :
Single
Religion :
Islam
Nationality :
Pakistani
NIC No. :
36101-6045396-7
Passport No :
AW0715961
Phone No : +923*********,
Address : Haji Manzoor Ahmed Near
MDA chock noor colony Multan
Reference:
May be furnished upon request.
TRAITS
Self dependent and hard work.
Excellent communication skills.
Ability to work under high schedules.
Prove ability to quickly learn new material and adapt the challenging
environment.