Project Construction
Resume:
RONALD GRILLO
Lyndhurst, New Jersey
cell: 201-***-****
email: *******@*******.***
PROFESSIONAL EXPERIENCE
I am a CAD Designer proficient in MicroStation and AutoCad.
I have over 40 years of experience in structure engineering design.
IH Engineers, P.C. 103 College Road, Princeton NJ 2008-2014
Senior CAD Designer
My time with IH started with a 1 year placement with Jacobs Engineering. In N.J.
I worked on the substructure and sign structure on the Witt Pen Bridge Project.
After that project I was in the IH office for about 2 years, working on
all kinds of small bridge and traffic projects for the Garden State Parkway
and the New Jersey Turnpike. I also did work on sign structure on the Bayonne
Bridge Project. I was contracted to work on the Tappan Zee Bridge
Project in Terrytown N.Y. for about a year. After that work was completed,
I am now here working on the Goethals project for Parsons New York Office.
Weidlinger Associates inc. 375 Hudson Street, NewYork, New York 10014 2006- 2008
CAD Designer
1 Monterrey, Mexcio Project
I worked on the support and foundation system for a light rail system.
2 Manhatten Bridge
I am working on replacement of expansion and construction joints.
I am also working on new inspection platforms for the bridge.
Michael Baker Jr., Inc. One Gateway Center Suite 2330, Newark, NJ 07102 2005 – 2006
CAD Designer
1Structural and foundation drawings
My time with Baker was great. I have been in there Princeton office for most of
the time, but how I am lead CAD Designer in there new Newark office.
I have worked on the Route 52 foundations plans and on other structural plans for the
Route 52 Project.
Medina Consultants Valley Brook Ave. Lyndhurst NJ 07071 2004 -2005
CAD Designer
Most of the time I spent with Medina, I was working with Baker in Princeton.
AMERICAN REF-FUEL CORP., 155 Chestnut Ridge Road Montvale NJ 07645 1996 – 2003
CAD Designer
1Mechanical equipment redesign
2Structural and foundation drawings
3Boiler inconel overlay mapping
4Conveyor redesign
5Process and instrument control diagram
6Electrical flow diagram
7Site plans
Essex: Redesigned Ashdoor for Ram Feeder. Designed an Inspector door for ash chute. Redesign
ferrous conveyor were some of the larger jobs. Redrawing of plant flow diagrams, assisted in site works
and as-builts for the new office building.
Chester: Redesigned ferrous area, sifting conveyor, pork chop and site plan and traffic flow.
Helped with afterburner grate problems, added tarping station in ferrous, worked on relocation of Ram
chute, redesigned if wear plate and wear bar for combustor and feed chute.
Hempstead: Boiler #2 changed Ram Feeder chute from a water cooled chute to a brick lined chute.
Pugmill drive redesigned.
PUBLIC SERVICE GAS & ELECTRIC, Newark, NJ 1993 –
1996
Intergraph-Microstation CAD Operator
8Survey drawings
9Civil site work
10Mapping
11Geographic Information System
Worked in Survey and Mapping Department. Responsible for revising and creating environmentally
sensitive area mapping for all generating stations. Revised various power lines right of way surveys.
Other duties included working with Geographic Information System (GIS) which is a system that uses a
wide range of applications including Aerial photography for survey quality output.
CH2M HILL, Cherry Hill Road, Parsippany, NJ 1988 – 1993
Senior Environmental Design Drafter-Microstation CAD Operator
12Industrial wastewater treatment plants
13Water treatment plants
14Architectural plans, elevations, and sections
15Structural plans, elevations and sections
16Environmental site remediation
17Process and instrument control diagrams
As an Environmental drafter worked on hazardous waste site plans showing area of concern, monitor
well, boring, testpit location with analytical results of findings. NJDEPE, SPDES, SPCC and ECRA
related work including groundwater contour maps, strategraphic cross-sections, isopach maps monitor
well and boring
construction diagrams. As a Microstation Cad Operator, worked on preliminary design of industrial
wastewater treatment plants. Including flow diagrams and process and instrumenting control diagrams as
well as building
layout and site placement. As Macintosh designer, designed covers for reports measles charts,
organizational charts, schedules and some desktop publishing.
ENVAR SERVICES CORP., 9 Distribution Way, South Brunswick, NJ
LEONARD ENGINEERING, ENVIRONICS, DALE CONSTRUCTION 1977 – 1988
Senior Civil, Environmental, Mechanical Design Drafter
18Architectural plans, elevations and sections
19Structural plans, elevations and sections
20HVAC, plumbing, and electrical plans
21TOPO and sounding plans
22Street utility plans
23Hazardous waste site remediation
24NJPDES, SPDES, SPCC, and ECRA related work
Leonard Engineering mechanical, structural, civil design and drafting was my primary job. Leonard
specialized petroleum terminal and storage facilities including piping and pipe racks storage tanks and
tank foundation plans. Truck racks, pump houses and boiler house designs were also included. Related
field work and some surveying was also part of my job.
Environmental engineering was Environics' specialty. Primary job was the preparation of waste water
treatment facilities plans, NJPDES, SPDES, and SPCC plans and terminal operations manuals. ECRA
related work including site plan, groundwater contour maps, strategraphic, cross-section, monitor well
construction, specifications, isopach, maps and some related fieldwork. Responsibilities for Dale
Construction was preparing and revising architectural drawings and some related field work.
VORNADO INC., City, State 1975 – 1977
Architectural Draftsman
Retail chain store planning department. Duties were drafting of construction drawings, making revisions
for alterations on existing stores and field checking stores prior to construction. Airbrush rendering.
DIVERSIFIED UTILITY SERVICES, City, State 1974 – 1975
Civil Draftsman
Duties included drafting construction drawings for street utility design and sewer and water treatment
system.
LES BYRON ASSOCIATES, City, State 1973 – 1974
Architectural Draftsman
Duties included drafting of construction drawings, design of parking facilities and field related work.
ENGINEERED FACILITIES INC., City, State 1972 -1973
Architectural Draftsman
Duties including making revisions on construction drawings and miscellaneous drafting.
EDUCATION
Intergraph Microstation, Intermediate and Advanced Training
CH2M Hill Training (1989)
Computer aided drafting, PC based AutoCad
Lyndhurst High School, Continuing Education Course (1987)
Architectural drafting, model building, air brushing, mechanical piping
Passaic School of Drafting
Contact this candidate