Project Safety
Resume:
DEAR SIR,
The Opportunity to Work in any Company is Interesting & I Believe That With
my Strong Technical Experience will Make me a Very Competitive Candidate
for the Position I am Applying .I have 17 years HSE/SAFETY Work
Experience in Industrial, Oil and Gas, LNG, Construction, Maintenance, Pre-
Commissioning & Commissioning my Main Responsibility, Authority &
Accountability for as HSE (safety) to Setting policy, Organizing, Planning,
Monitoring Performance Measuring & Reviewing, Risk analysis,Risk
Assessment & Management Tools By Performing Risk Control Systems &
Methods, Accident/Incident Investigation & Information Assessment
Including Safe System of Work by Design Hazard Management,Engineering
Safety, JSA, QRA & Five Star Auditing, Safety Case & Compliance, COMAH
Regulation With MAPP Document, ALARP Process,HAZOPS, HAZID, HAZAN, FMEA
Procedure, Fault Tree Analysis & Analytical Procedure, Qualitative &
Quantitative Evaluation of Fault Tree, Event Tree As well as Developing
Health and Safety Culture & Climate Continually. These Areas Skills &
Expertise on My HSE Professional Career.
CURRICULUM VITAE
NAME : RANJEET SWINDER SINGH
PRESENT POSITION : HSE SPECIALIST
NATIONALY : Indian
ADDRESS : Om Ganesh Apt, Flat no. 704
Station Road, Ulhasnagar - 421004
Dist - Thane, Mumbai, Maharashtra, India
DATE OF BIRTH : 26th August 1969
CONTACT NO. : Mobile Cell +917********* OR +
E-MAIL ADRESS : ****************@*****.***
MARITAL STATUS : Married
LANGUAGE KNOW : English, Hindi, Marathi, Urdu & Punjabi
PASSPORT NO. : E 0836863 & Renewed On 2011 K1637754
EDUCATIONAL QUALI. : Degree Graduate from Mumbai University.
FOREIGN TECHNICAL : NEBOSH NATIONAL LEVEL -3 FROM UK
CERTIFICATION.
QUALIFICATION (National Examination Board for
Occupational Safety &
Health)
TECHNICAL
QUALIFICATION : Diploma in Industrial Safety Management from
Chennai,
Diploma in Mechanical Engineering Sem. from
Karnataka
AUDITOR TECHNICAL OHSAS 18001 - 2007 LEAD AUDITOR TRAINING &
CERTIFICATION
QUALIFICATION
INSTRUCTOR COURSE TO TRAIN THE TRAINER FROM (RRC MIDDLES EAST)
BHARINE
RADIATION PROTECTION OFFICER (RPO) FROM SAFERED INSTITUTE (SIEVERT ROUP)
UAE
. Health & Safety Developing, Implementing, Maintaining & Improve for
Refreshing Standard.
. Training in Safety Leadership
. Scaffold Safety
. Breathing Apparatus Familiarization
. Employees Training for Stop programmer
. Knowledge in Hydrogen Sulphide ( H2S )
. Knowledge in Permit to Work System
. Job safety Analyzing and fire fighting extinguisher
. HSE MEMBERSHIP FROM lexisnexis.co.uk
ADDITIONAL QUALIFICATIONS & TRAININGS ATTENDED
1. Method of Statement & job safety analyses (FROM MIDDLES EAST
QATAR)
2. Permit to work System. (FROM MIDDLES EAST
QATAR)
3. Confine space Entry. (FROM
MIDDLES EAST QATAR)
4. Behavioral safety. (FROM
MIDDLES EAST QATAR)
5. Accident/incident Reporting. (FROM MIDDLES EAST
QATAR)
6. Defensive Driving. ( FROM
MIDDLES EAST QATAR)
7. H2S Training. (FROM F
MIDDLES EAST QATAR)
8. Hazard Management. (FROM MIDDLES EAST
QATAR)
9. Incident Injury frees (IIF). (FROM MIDDLES
EAST QATAR)
10. Waste Management. (FROM MIDDLES
EAST QATAR)
11. Supervisors Responsibilities. (FROM MIDDLES
EAST QATAR)
12. First Aid.
(FROM MIDDLES EAST QATAR)
13. Safety Excellence. (FROM MIDDLES
EAST QATAR)
14. Boset Offshore, Helicopter Underwater
Escape Training, Basic Life Support,
Basic Fire Awareness Introduction to
Sea Survival&H2S Training, (From YKK, Kazakhstan)
15. Kelvin Top Set Accident/
Incident Investigation. (FROM MIDDLES EAST QATAR)
16. Internal Auditor Training. (FROM MIDDLES
EAST QATAR)
17. Introduction to Fire Safety Level II
(Total Safety L.L.C) (FROM MIDDLES EAST QATAR)
18. Safety Leadership for Coaches. (FROM MIDDLES EAST
QATAR)
19. Medic First Aid.
(FROM MIDDLES EAST QATAR)
20. Safety Leadership for HSE Personnel. (FROM MIDDLES EAST
QATAR)
21. Fire Team Leader (From MIDDLES
EAST. Fire Direct, SAUDI)
22. Fall Protection (
RRC MIDDLES EAST BHARINE)
23. Logout/ Tag out ( RRC MIDDLES
EAST BHARINE)
24. permit To Work ( RRC
MIDDLES EAST BHARINE)
25. Confined Space ( RRC
MIDDLES EAST BHARINE)
26. Incident investigation & Root cause Analysis ( RRC MIDDLES EAST
BHARINE)
27. Hydrogen Supplied Course ( RRC MIDDLES EAST
BHARINE)
PLAN & OBJECTIVE
Planning Process is Plan & Objective To Developing, Maintaining, Improving
& Measuring Performance Of Operational Health & Safety Management System
By Introducing Effective System In Place & System Is Technically Adequate
For Objectives Such 'Plan- Do- Check- ACT' Elements Process Like Example
Plan For Management Commitment & Credible Leadership, Hazard & Risk
Management Objective,Health & Safety Target,& HSE Programmed ETC. Do For
Organization & Responsibilities, Personal &Training, Information,
Documentation, Communication, Operational Control, And Emergency
Preparedness & Response ETC Implementation Asset Management Strategy. Check
For Incident Reporting, Monitoring, & Performance Assessment ETC Act For
Assessment & Improvement, Safety Management & System Evaluation Review
Together With Health and Safety Bench Marking For continues learning from
other & Learning more about Organization's Strength & Weakness In Process
Including Acting Lessons Learned, The Consistent Implementation &
Improvement of The Key Performance Indicators Are The Structured Process
of Collecting Independent Information On Efficiency, Effectiveness, &
Reliability Of Total Safety Management System, Drawing Plans To Making
Corrective Action As well As Introducing CHASE (Complete Health Safety
Evaluation) System Enforcing in Owns Successful Health & Management.
To Work in a Challenging Environment Where I can Utilize my Working
knowledge, Skills and Experience, While Simultaneously Providing Further
Professional Growth, With Excellent Interpersonal and Communication Skills,
and Ability to Establish Healthy Relationship With All Levels of Management, to Provide a Better Healthy, Safe and Green Environment to All levels of
Work force, Plant and Environment.
WORK EXPERIENCE
1- Company - Al HOSN (ADNOC)Gas (FLUOR PMC) Worked With As Company
Client
Project - Shah Gas Development (SGD) At Abu Dhabi, Worked
from June 2012 To
September 2013
Position Held - HSE Specialist (Project Management
Consultant) For Package 2& 3
Responsibilities/ Accountabilities
. Participate in technical bid evaluation for Major / Minor Project and
review of technical evaluation report prepared by PMC for Major Projects
Front End Engineering Design (FEED):
. Provide input in the Process Design Basis, PFD, Process Description,
P&ID's Process Datasheets, Shutdown Logic Diagram, Material Requisition for
critical equipment, HAZOP review, Assist in Licensor selection, CTN's as
required
Engineering Procurement & Construction (EPC):
. Reviews EPC Contractors detailed design, independent of PMC, the Material
Requisitions, Bid Tabulation, Vendor Data, etc., to ensure compliance with
Contract.
. Reviews the work performed by Project Management Consultant's specialists
to ensure compliance with Agreement requirements. Monitors the performance
of PMC & EPC contractors in achieving requisite quality & standards set
forth in the Agreement.
Specifications & Standards:
. Carry out the periodic reviews and updating (as and when required) of the
Engineering and Technical Support Division Standards and Procedures to
ensure changes and relevant reference to industry standards, codes of
practice and procedures are regularly updated.
. Participate in the collation and maintenance of a data base of lessons
learnt from various projects and support the E&TSD Department Managers in
the evaluation of Standards and Procedures best practices followed in the
industry for proposing improvements in standards.
Ensure relevant company standards, practices and HSE requirements are
uniformly and consistently applied to all E&TSD activities.
Organizational Analysis, Development and Change Management: Direct Method,
Direct Action & Indirect Method, Indirect Action dealing with Concept
Design of Project Residual Risk As Selecting Technology, Process,
Location, Hazard Identification, Risk Assessment Inherently Safer Design,
HAZOP & Detail Design of Project Residual Risk Reduction Measurement
Prevention, Control, Mitigation Layer of protection Passive, Active,
Administrative
Design Hazard Management(1)1Inherent Safety (2)Engineering
Safety(3)Procedural Safety check & ensuring Continually Risk Reduction with
these three program & Thoroughly detail level
> Engage in the implementation of the HSE-MS within the Line/Asset;
providing guidance and support in its proper usage.
> Develop the Asset's HSE Plan as per Project requirements and enforce
conformity through regular monitoring and participating in remedial
actions.
> Provide interfacing between Corporate MSEM, Internal/External Auditors &
other Directorates and the Asset - to improve lateral learning's & risk
avoidance..
> Support the Directorate's Contract Holders & Company Site
Representatives in the management of HSE contracts and foster a Team
spirit that 'Everyone watches out for each other'.
> Facilitate HSE competence development and learning to ensure staff is
appropriately equipped to work in the specific Project teams assigned.
> Support HSE Audits and implement recommendations striving to maintain
ISO 14001 compliance (including Journey Managements, Incident
investigations, etc)
2- Client ARAMCO
Project ONSHORE Drilling at Saudi Arab from April 2011
to 27 March 2012,
As Safety Officer & Training coordinator
Main Contractor SAIPEM
Position Held Safety Officer & Training coordinator
Responsibilities/ Accountabilities
> To conduct HSE induction for all employee & visitor
> Daily rig site inspection & check standard, objective meet with
requirement & effective.
> Coordinating onshore training programs & Cross checking certification
for rig crews
> Daily meeting with Tool Pusher & other respective department
&conducting onshore crew safety meeting including advice operation
manager on HSE issue.
> Assisting response plans procedure for drill & strictly implement
permit to work system.
> Investigate accident causes & asses dangerous occurrence deciding how
to control them.
> Reporting to management specific hazard & level of risk & evacuate
practical measurement how to control or minimize including handling,
storing, using of chemical.
3 -Company Qatar Gas Worked with Qatar GAS as Client
(Representing To Qatar Gas Project Management
Team)
Project QCS (QG 3&4 Shell, Conoco Phillips)
PMT TEAM from 2008 April To September 2010
Position Held HSE ENGINEER /Site HSE OFFICER
Responsibilities/ Accountabilities
Process Safety and risk control engineering in the international oil and
gas industry. Highly experienced in use of design and assessment methods
used within discipline, such as Quantitative Risk Assessment (QRA) studies,
Safety Integrity Level (SIL) studies, HAZOP studies, Fault Tree Analysis
(FTA), Event Tree Analysis (ETA), consequence modeling, and in general all
the methodologies and techniques related to the area of risk control
engineering. Fully conversant with international standards (API, NFPA,
ISA, IEC, etc.) & their application to the design and operation of oil &
gas facilities. Highly competent in project safety and design review
> HAZOP and HAZID team leader
> High pressure / high sour hydrocarbon process hazard management
> Hazard & Effects Management Process (HEMP) for lifecycle demo of ALARP
> Health, Safety, Security, Environmental and Sustainable Development
(HSSESD)
> Management Systems development and implementation
> HSE Case and Verification Scheme development
> HSE Critical Element (HSECE) performance standard development,
suitability
> assessment and operational compliance reporting
> Combined Production and Rig Activities (CPRA) / SIMOPs review
> Bowtie risk analysis
> Quantitative Risk Assessment (QRA) and cost/benefit analysis
> Fire and explosion, toxic hazard, smoke & gas ingress analysis
> Layer of Protection Analysis (LOPA)
> Safety Integrity Level (SIL) / Instrument Protective Function (IPF)
review
> Independent critical review and due diligence assessment
> Total risk management for decision support
> Human Factors Engineering Assessment (HFEA)
> Legislative compliance review
> Design review for lifecycle safety, operability, maintainability,
constructability
> and compliance
> Operational procedures, inspection and maintenance system overhaul
> Knowledge preservation and lessons learned review
> Continuous improvement programmed development
> Training workshop development and facilitation
> Evacuation, escape and rescue analysis (EERA)
> Safety systems survivability studies
> Personnel transfer risk assessment
> Dropped object risk assessment
> Ship collision risk assessment
> High integrity protective system (HIPS) risk assessment
> Failure mode, effect and consequence analysis (FMECA) and reliability
assessment
> Hazardous Area Classification (HAC)
4-Client AGIP
Project Piles and Flare For Offshore at Kazakhstan from
22 July 2007 TO 12oct.2007
Main Contractor SAIPEM
Position Held HSE Officer/ Safety Officer
JOB RESPONSIBILITIES
> Assist to develop HSE Plans and procedures and ensures compliance with
company standards / local government regulations.
> Assist to develops, prepares and administers complete HSE Key
Performance Indicators for the Facility.
> Develops periodical HSE reports as required.
> Liaises with Asst. HSE Coordinator, colleagues and local HSE bodies to
resolve issues
> Compiles and manages the Safety and Environment documentation in
accordance with applicable Safety and Environment standards,
legislation.
> Monitors improvements through the preparation and implementation of
HSE Audits and Inspections.
> Assists in the investigation of accidents and analysis of accident
statistics in order to identify trends and propose the necessary
corrective measures.
> Consolidates monthly accidents/man-hour statistics for the Region and
reports collected information to corporate HSE.
> Maintenance of all Life Saving Equipments & Safety Equipments and
monitor production activities on site are carried out in a safe manner
and in adherence to the Company Safety policy.
> Promotes safety awareness to the workforce through HSE meetings,
trainings safety committee and safety representatives. Monitors HSE
systems within the company.
5-Client Qatar Gas from December 10-12-2005 to 10-
07-2007
Project Qatar Gas II LNG Development QGX (EXXON)
Project
Main Contractor Chiyoda Technip Joint Venture
Position Held HSE Officer/Supervisor
JOB RESPONSIBILITIES
CHIYODA TECNIP International Company is one of the leading EPC
Company having major petrochemical construction projects with major oil
companies all over the world. I was reporting to HSE Superintendent,
leading and conducting safety training for construction work force of Sub
contractor.
> Implementation of the company corporate HSE management system for the
work site.
> Promotion of safety awareness of workforce at all levels through pro-
active attitude within the Project Team and Contractors.
> Evaluates & monitors site working conditions applicable to the plant
construction works.
> Attends & conducts regular meetings with THE PROJECT & Contractors
representatives to discuss and agree safety standards, concerns &
potential hazards.
> Ensure that risk assessment is performed before each potentially
dangerous activity.
> Participate in and organize Job Safety Analysis with Contractors &
request new JSA if necessary.
> Perform regular Safety Compliance Inspections and audit of Contractor
to ensure implementation of safe working procedures & best practices.
> Conduct and participate in Safety Training of THE PROJECT & Contractor
personnel as required.
> Oversight of the implementation of the PTW system when required.
> Assists in the investigation of accidents & incidents to determine the
underlying causes of the accidents/injuries.
6-Client Qatar Petroleum
Project Worked with Qatar Petroleum Refinery (Nadcow)
In Maintenance from March 2005 to June 2005
Main Contractor DOPET Company Ltd.
Position Held HSE Coordinator
JOB RESPONSIBILITIES
> Maintenance of fixed and portable Fire Extinguishing systems.
> Helping in identifying and eliminating unsafe conditions and maintain
complete work field safety, maintain proper house keeping.
> Ensuring complete safety of contract workers.
> Conducting toolbox talks and safety trainings for workers.
> B.A. Service support and use.
> Workplace inspection before commencing the work.
> Service support of First Aid, Fire Watch, Confined Space Entry, &
Emergency Rescue. Use of Gas Detection Equipment
7-Client DUGAS Company Ltd.
Project Worked with Dubai Natural Gas Company Limited
In Maintenance from 5th, Jan 2004 to 12th Feb
2005.
Main Contractor ANABEEB
Position Held Safety Officer/Supervisor
JOB RESPONSIBILITIES
> Maintenance of fixed and portable Fire Extinguishing systems.
> Helping in identifying and eliminating unsafe conditions and maintain
complete work field safety, maintain proper housekeeping.
> Ensuring complete safety of contract workers.
> Conducting toolbox talks and safety trainings for workers.
> B.A. Service support and use.
> Workplace inspection before commencing the work.
> Service support of First Aid, Fire Watch, Confined Space Entry, &
Emergency Rescue. Use of Gas Detection Equipment
8-Client Reliance Industries Limited Gujarat, India
Project Hazaria Manufacturing Division & Expansion
phace-1
Main Contractor A. S. Nair
Position Held Assistant Safety Officer from January 1996 to
March 2001.
JOB RESPONSIBILITIES
> Ensuring site operatives are aware of risks and hazards.
> Monitoring all safety issues on site, to prevent and stop dangerous
work practices.
> Ensuring all near misses is reported and preventive measures are
taken.
> Supporting management in preparing project safety plans, carrying
out formal training in safety, toolbox talks etc:-
> Liaison with subcontractors and plant operators to ensure awareness
of all safety requirements and PTW permit system.
> Periodic checking of all fire fighting equipments, imparting first
aid fire fighting training for all employees, conducting mock fire
fighting drills.
> Co-ordination of all temporary works, implementation of safe system
of works.
> Ensuring the effective implementation of HSE Management procedures.
> Holding safety induction courses on site for all new and
existing employees.
> Issuing of company safety notices.
> Warning of dangerous occurrences and practices.
> Conducting regular site inspections.
> Supporting management in solving all problems related to Health,
Safety and Environment.
9- Client Hardilia Petro Chemical Industries
Project HCR EXPANSION PROJECT
Main Contractor D.K. Sury
Position Held Safety Officer from 25th, July 2001, 31st
Dec 2003.
Job Responsibilities
> To conduct HSE induction for all employees
> Daily site inspection and reporting the unsafe action /conditions to
the site management and coordinating with the site execution
personnel.
> Carry out weekly inspection of the equipment and vehicles on site. .
> Actively participate in the accident investigation and prevention and
report to the site management.
> Monitoring the use of PPE on the site.
> Conducting fire fighting and safety mock drills and participate in it
> Ensure the PTW system is being strictly implemented on the site
> Maintaining tool box talks, conducted by line supervisors
> Ensure the heavy equipments are transported safely on site.
> Conduct audits on site and report of the findings to the management
and coordinate with the operations in rectifying the unsafe actions /
conditions of the same
> Conducting weekly meetings with clients / management to discuss weekly
performance and giving solutions to the problems faced.
My 17 years HSE PROFESSIONAL worked experience with Construction (Design &
Management) below key principals
. safety must be considered in a systematic manner from the outset of a
project;
. all persons whose activities contribute to health and safety should be
involved in a project;
. effective planning and coordination should take place throughout the
duration of the project;
. competent persons must be involved with all stages of a project, and
adequate resources must be made available to them to undertake health
and safety provisions;
. health and safety aspects of a project must be planned and managed;
. there must be effective exchange and communication of relevant
information between those persons involved in a project;
. Formal health and safety records must be compiled and kept. Effective
management is to be considered in terms of a prioritized hierarchy:
First, Risk Avoidance, Second, Risk Reduction, Third, Risk Control
Terminology
. Agent in relation to any client means any person who acts as agent for
a client in connection with the carrying on by the person of a trade,
business or other undertaking (whether for profit or not).
. Cleaning work means the cleaning of any windows or any transparent or
translucent wall, ceiling or roof in or on a structure, where such
cleaning involves a risk of a person falling.
. Construction phase means the period of time starting when construction
work in any project starts, and ending when construction work in that
project is completed.
. Construction work, that is the carrying out of any building, civil
engineering or engineering construction work, includes any of the
following:
. The construction, alteration, conversion, fitting out, commissioning,
renovation, repair, upkeep, redecoration or other maintenance
(including cleaning which involves the use of water or toxic
substances for the purposes of Regulation 7 of the Chemicals (Hazard
Information and Packaging for Supply) Regulations 2002),
decommissioning, demolition or dismantling of a structure.
. The preparation for an intended structure, including site clearance,
exploration investigation (but not site survey) and excavation, and
laying or installing the foundations of the structure.
. The assembly of prefabricated elements to form a structure, or the
disassembly of prefabricated elements which, immediately before such
disassembly, formed a structure.
. The removal of a structure, or part of a structure, or of any product
or waste resulting from demolition or dismantling of a structure, or
from disassembly of prefabricated elements which, immediately before
such disassembly, formed a structure, and the installation,
commissioning, maintenance, repair or removal of mechanical,
electrical, gas, compressed air, hydraulic telecommunications,
computer or similar services which are normally fixed within or to a
structure, but does not include the exploration for, or extraction of,
mineral resources or activities preparatory thereto carried out at a
place where such exploration or extraction is carried out.
. Contractor means any person who carries on a trade, business or other
undertaking (whether for profit or not) in connection with which he
undertakes to, or does carry out or manage construction work and
arranges for any person at work under his control (including, where he
is an employer, any employee of his) to carry out or manage
construction work.
. Design, in relation to any structure includes drawing, design details,
specification and bill of quantities (including specification of
articles or substances) in relation to the structure.
. Designer means any person who carries on a trade, business or other
undertaking in connection with which he prepares a design; or arranges
for any person under his control including, where he is an employer,
any employee of his to prepare a design, relating to a structure or
part of a structure.
. Developer means a commercial developer who has sold domestic premises
prior to completion of the project, and who arranges for the
construction work to be carried out.
. Domestic client means a client for whom a project is carried out, not
being a project carried out in connection with the carrying on by the
client of a trade, business or other undertaking (whether for profit
or not).
. Health and Safety File: a record of information for the client which
focuses on health and safety. It alerts those who are responsible for
the structure and equipment in it to the significant health and safety
risks which will have to be dealt with during subsequent use,
construction, maintenance, repair and cleaning work.
. Health and Safety Plan: documentation which serves two purposes. The
pre-tender stage health and safety plan prepared before the tendering
process brings together the health and safety information obtained
from the client and designers, and aids selection of the principal
contractor. The health and safety plan during the construction phase
details how the construction works will be managed to ensure health
and safety.
. Monitoring: monitoring has two components. Active measures performance
against plans and standards worked out and agreed at the start of the
contract. It shows how much management is committed to achieving
objectives and maintaining standards. Reactive involves the
investigation of accidents and incidents and the analysis of data from
specific investigations.
. CDM Coordinator: a company, partnership, organization or an individual
who coordinates and manages the health and safety aspects of design.
The CDM Coordinator also has to ensure that the pre-tender stage of
the health and safety plan and the health and safety file are
prepared.
. Principal contractor: who is appointed by the client and has the
overall responsibility for the management of site operations,
including overall coordination of site health and safety management.
. Project means an operation in which includes, or is intended to
include, construction work.
. Safety method statement: a written document laying out the work
procedure and sequence of operation designed to ensure health and
safety. It results from the risk assessment carried out for the task
or operation, and the control measures identified. If the risk is low,
an oral statement may suffice.
. Structure means: any building, steel or reinforced concrete structure
(not being a building), railway line or siding, tramway line, dock,
harbour, inland navigation, tunnel, shaft, bridge, viaduct,
waterworks, reservoir, pipe or pipeline (whatever, in either case, it
contains or is intended to contain), cable, aqueduct, sewer, sewage
works, gasholder, road, airfield, sea defenses works, river works,
drainage works, earthworks, lagoon, dam, wall, caisson, mast, tower,
pylon, underground tank, earth retaining structure or structure
designed to preserve or alter any natural feature, and any other
structure similar to the foregoing; or any framework, false work,
scaffold or other structure designed or used to provide support or
means of access during construction work; or any fixed plant in
respect of work which is installation, commissioning, decommissioning
or dismantling and where such work involves a risk of a person
falling.
References
.
Abdul Rehmaan, Q.P HSE Manager,
Larry Easley
Onshore HSE Manager
+974-******** Brian Rafter
Site HSE Lead
+974-
55839431
*******@********.***.**
Hideki Delucia
Site HSE Lead
.HSE Manager
John Ware CTJV HSE Manager
Place India & Date
Yours Truly
(RANJEET SWINDER SINGH)
Contact this candidate