Engineer Engineering

Zuhair Othman

**** ******* *****, *****, ** *****

973-***-**** Mobile

*******@***.***

EMPLOYMENT & EXPERIENCE

. 05/13/2013-06/16/2014 ITT Exelis Inc., Rochester, New York

. PCB Design Engineer,

Command, Control, Communications, Computers, Intelligence, Surveillance and

Reconnaissance(C4ISR) related products and systems and information and

technical services, supplying military, government and commercial customers

in the United States and globally.

. Set up constraints manager with design rules from engineering input &

Voltage spacing matrix, as tight as 3.2 mil lines, 3.2 mil spacing

place, route boards to comply with IPC DFM DFA DFT Class III, mixed

technology circuit boards Analog, Digital and RF. Use of blind-buried

and laser via technology Differential pairs with matched length.

Utilizing Cadence Allegro/Orcad 16.6; Altium 14.2; Pads; Cam350; Gerber

data; Assembly, Fabrication drawings and Parts List. Including PCB data

translation including Gerber, odb++, dxf & STEP files for 3D parts

modeling, Exceed on Demand for applications access.

01/23/2012-04/28/2013 Parker Aerospace, Irvine, California

PWB Design Engineer, Power & I/O board for Aircraft flight controls.

Design of complex 8 to 16 Layer, Rigid-Flex, and Rigid Printed Wiring

Boards (PWB), utilizing 0.8 mm BGA's, 0402 parts. Set up constraints

manager with design rules from engineering input & spacing matrix, as tight

as 3mil lines, 4 mil spacing.

Place, route boards to comply with IPC DFM DFA DFT Class 3 (Hi Reliability

Requirements) and environmental issues, including thermal and vibration.

Create component symbols (footprints) from data sheets; in accordance with

IPC standards.

Create drawing packages for PWB fabrication including generating GERBER

data and drawing packages for PWA manufacturing including BOM information

for procurement. MS office software, IDF, Gerber data.

Perform changes and to document by creating Engineering Change Notice (ECN)

in IBM Lotus Notes .

Participate in PWB and packaging design reviews and perform peer drawing

package checking and effectively coordinate design requirements with

outside design services. Utilizing Cadence Allegro 16.5/Orcad and Valor.

.

. 06/06/2011-01/19/2012 Technology Research Inc. - Clearwater, FL

Sr. PCB Layout Engineer, Electrical Safety Devices for home office

construction sites, portable Electrical Equipment.

Designed layout 2-6 layers of digital, RF and analog PCB's, fabrication,

assembly drawings, library component entry and prepare document release

packages. Checked the work of other designers, reviewed designs from

outside services.

Worked effectively with design engineers, Systems Operations, bare board

manufacturing, assembly facilities, and document control for product

release.

Created component symbols (footprint) in accordance with IPC standards.

Gerber data and drawing packages for manufacturing including change Notices

(ECN). MS office software, ODB++; DXF, IDF, Gerber data.

Participated in PWB and packaging design reviews and performed peer drawing

package checking and effectively coordinated design requirements with

outside design services. Using Pads, AutoCAD, Cam350 and Camtastic

10/18/2010-05/31/2011 Parker Aerospace, Irvine, California

PWB Design Engineer, Power & I/O board for Aircraft flight controls

Designed complex 8 to 16 Layers, Rigid-Flex, and Rigid Printed Wiring

Boards (PWB), utilizing 0.8 mm BGA's, 0402 parts. Set up constraints

manager with design rules from engineering input & spacing matrix, as tight

as 3mil lines, 4 mil spacing.

Place, route boards to comply with IPC DFM DFA DFT Class 3 (Hi Reliability

Requirements) and environmental issues, including thermal and vibration.

Created component symbols (footprints) from data sheets; in accordance with

IPC standards. Utilizing Cadence Allegro 16.5/Orcad and Valor/Vsure.

Created drawing packages for PWB fabrication including generating GERBER

data and drawing packages for PWA manufacturing including BOM information

for procurement.

Engineering Change Notice (ECN) in IBM Lotus Notes.

Participate in PWB and packaging design reviews and perform peer drawing

package checking and effectively coordinate design requirements with

outside design services.

09/2007-07/2010 Moog Inc., East Aurora, New York - Contractor

Sr. PCB Designer, Aerospace Electronic controls

Designed high power IGBT and/or MOSFET output stage and power distribution

(up to 400A/400V peak) up to 24 Layer Rigid-Flex-Rigid Printed Wiring

Boards (PWB) with 0.8 mm BGA's and 0402 parts for commercial/military

aircraft. Setup constraints for all designs. Collaborated to conform to

testing, manufacturing and assembly guidelines. Worked as a team member of

projects to assure interfacing of signals and packaging of components.

Researched component data sheets to create library pattern/symbols using

Cadence Allegro 15.7 & Orcad CIS, AutoCAD DXF for fabrication drawings;

ODB++, and Camtastic for Gerber check. MS office software

10/2006-08/2007 Lutron Electronics, Coopersburg, Pennsylvania - Contractor

Sr. PCB Layout Designer. Light control Systems 120/240VAC Domestic/

International, commercial & residential.

PCB Layout 2-6 layer, component placement & routing 0402, 5 mil lines 5 mil

spacing, and created associated drawings and documentation DFM, DFT, and

DFA using through hole and SMT components. Products designed in compliance

with regulatory agencies "UL, IPC"

Created schematics, symbols, footprints from Spec sheets per IPC std., and

Manufacturing Engineering input.

Panel DWG's. Setup design rules/constraints and participated in design

reviews with engineering & manufacturing. MS office software, Gerber data,

IDF & DXF.

Maintained databases and documentation integrity using Pcad 2004 for PCB

Layout/Schematics and Camtastic 2004 for Gerber viewing and validations,

Export to ProE for 3D Modeling; IDF, DXF in/out for mechanical

documentation.

01/2003-02/2006 Delta Products Corp., Durham, North Carolina

Sr. PCB Designer, Power supplies for industrial, and commercial.

PCB Layout 2-16 layers, created associated drawings and documentation DFM,

DFT, and DFA. Products designed in compliance with regulatory agencies "UL

& IPC", and to handle various Hi-spd processors 3-10 Gh.

Created schematics/symbols & footprints, Gerber files. Developed design

rules and participated in design reviews with engineering & manufacturing.

Maintained database and documentation integrity utilized Orcad layout plus

& Capture CIS 9.2, PCAD 2002, Camtastic 2004, and AutoCAD LT2000; DXF. MS

office software.

10/2000-12/2002 Medtronic Xomed; Jacksonville, Florida - Contract

Sr. PCB Designer, Medical devices and Electronics

Prepared schematics, part research, new build/add to library documentation,

bills of material integrity checks.

Prepared new and existing PCB designs using Orcad Layout Plus and Capture

CIS 9.5.

Created drawings in AutoCAD; DXF. Used Gerb-tool for Gerber files as files

are sent off for manufacturing.

11/1996-07/2000 Federal Express Corporation, Memphis, Tennessee

Sr. Technical Specialist, Hand Held Devices, and bar code readers.

Managed part/symbol libraries and documentation control.

Created for manufacturing of prototypes and production boards.

Utilized PCAD 8.5, and Orcad Layout plus 9.0, and Capture CIS, Gerber file

review & verifications as files.

10/1995-10/1996 Entergy Integrated Solutions, Inc., Memphis, Tennessee

Sr. PCB Designer, Controlled lighting power supplies

Schematic entry, new parts library build, new and existing PCB layouts

designs, using Pcad 6.5.

Created Gerber data for prototypes, and production boards.

08/1994-09/1995 Kollmorgen, Industrial Drives Division, Radford, Virginia

Sr. PCB Designer, Motion Controls, and Robotics

Performed schematic entry, new parts library build, new and existing PCB

layout designs, using Accel EDA/Pcad PCB tools Rev. 8.2. Created electronic

file drawings in AutoCAD from DXF; suitable for manufacture of engineering

prototypes and production boards.

09/1991-07/1994 Cortelco International, Inc., Memphis, Tennessee

Sr. PCB Designer, Telecommunications Equipment.

Performed schematic entry, new part library build new/existing PCB layouts.

Created electronic CAD files or drawings suitable for manufacture of

engineering prototypes and production boards. Utilizing Pcad 8.5. Also Gerb-

tool for Gerber file review & verification as files are sent off for

manufacturing.

05/1990-08/1991GEC Aerospace Inc., Whippany, New Jersey

Sr. PCB Designer, Aerospace products

Designed Aircraft components, such as actuators and power supplies.

Performed schematic entry, PCB layout placement, routing, & Parts Lists.

Utilized Pcad 6.0

Also for Gerber files review Gerb-tool verification as files are sent off

for manufacturing.

05/1982-04/1990 Corporate Communication Inc., Fairfield, New Jersey

Broadcast video equipment;

Mechanical Draftsman, PCB Layout, assembly fabrication Harness drawings

electron mechanical assembly parts list PCB assembly soldering testing &

installation.

1 EDUCATION

2 1980 Diploma in Electro-Mechanical Drafting, School of Business Machines,

Jersey City, New Jersey

1986 Associate Degree in Electronic Engineering, National Education Center,

Nutly, New Jersey

2004, IPC Designers Council Certification "C.I.D"

Contact this candidate