Mechanical Engineer Power Plant

RESUME

ATIQUE ZAMAN

skype id: atiqmech**

E-mail : **********@*****.***

Mobile : +917*********

Position Applied For: MECHANICAL ENGINEER / WELDING INSPECTOR (QA/QC)

Carrier Objective:

To keep learning the dynamic aspect of engineering for achieving the maximum height in

Career and to blend the gained knowledge and experience so as to deliver my best for the

Organization

Professional Profile:

A Mechanical Engineer with over 12 years of experience in Power Plant / Pipeline

Project in QA/QC Dept. carrying out Inspections in Welding and Mechanical (Rotary

& Static Equipment) / Piping Inspection in Power Plant, Petrochemical, Chemical,

Refinery,

Oil & Gas projects.

Certification:

CSWIP 3.1 – level-2 (An international certification for welding inspection from

•

TWI, UK)

Technical Qualification:

Bachelor of Engineering (Mechanical). from Oriental Institute of Science &

•

Technology, Bhopal (MP, India) In June 2010.

Diploma in Mechanical Engineering from Al-Kabir Polytechnic,

•

Jamshedpur with Distinction under S.B.T.E Ranchi, Jharkhand.

Duties and Responsibilities:

Monitoring the site construction activities and verifying the work as per latest

revision of drawing, procedure, project technical specification and codes and

standards.

Inspection and test plans (ITP's), Quality management procedure documents

review before conducting inspections.

Familiar with International Codes & Standards like ASME 31.1, ASME 31.3, API

510, API 686, API 650, AISC ASTM A325.

Aware of Client specifications concerning all mechanical related procedures Reviewing

various WPS, PQR, Inspection Test Plans and Construction Method.

Documented receiving material owner inspection for welding materials and related

consumables to ensure their type, size, condition and storage.

Witnessing Procedure Qualification and Welder Performance Qualification Test in

accordance to ASME Sec IX.

Documented Owner Inspection and monitoring all structural works at all ITP inspection

points, from installation to total fabrication including structural welding.

Coordinating various Destructive tests with their results for Bend test, tensile test,

hardness test, nick brake, and notch toughness impact (Chirpy) test.

Responsible for owner Inspection during assembly & Erection of metallic (CS, SS & Alloy)

and RTR Piping with P & IDs, ISO Drawings, General Arrangement Drawings with

reference to ASMEB 31.3 & Client specifications

Coordinating Various NDE activities like Radiography film Interpretation, Dye

Penetration Test, Magnetic Particle Inspection etc.

Statements for fabrication & erection of structural, piping, tanks, NDE procedures etc of

different sub contractors.

Coordinating PMI test for welded High alloy steel joints as per client requirement.

Activities related WELDING INSPECTION.

Assuring Welding Inspections as per ASME Sec IX.

Aware of Client specifications concerning all mechanical related procedures

Reviewing various WPS/PQR, Inspection Test Plans and Construction Method.

Witnessing P r o c e d u r e Qualification and Welder Performance Qualification Test

in accordance to ASME Sec IX.

Coordinating Various N D E activities like Radiography film Interpretation, Dye

Penetration Test, Magnetic Particle Inspection etc.

Preparing and maintaining all the Quality related documents as per ISO system.

Making and Handing over QA/QC Data package to the client.

Coordinating PMI test for welded High alloy steel joints as per client requirement.

Acquainted to various Codes& Standards like ASMESECII, SECV, SECVIII,

SEC IX, API 620, 650, 1104, AWS D1.1, ASTM, ASMEB31.1, B31.3, B31.4, BS

22551,974, 490 etc

Activities related ROTARY & STATIC EQUIPMENT INSPECTION.

Rotary And Static Equipment Installation Inspections as per Standards API 686 –

(Turbines, Pumps, compressors and motor driven) blowers, Drums etc.

Levelling and Elevation checking inspection prior to grouting of Static and Rotary

Equipment.

Carrying out Soft-Foot Inspection for the Rotary Equipment.

Pre & Final Alignments of the shaft coupling of the Rotary Equipment and Pipe

Connection flange parallelism inspection for Rotary Equipment.

Witnessing Rotary Equipment driver and driven in and out shaft alignment and

offset conditions.

Activities related STEEL STRUCTURE INSPECTION.

Able to check the STEEL STRUCTURES installation.

Familiar with AISC standard for Steel structure.

Anchor Bolt Tightening Inspection

Plumbness /Alignment inspection of the Steel Structures.

Bolt Tightening Inspection of the joints.

Using SKIDMORE for calibration of Torque Wrench to get the Correct Tension

Required for the Bolts/Nuts.

Activities related PIPING INSPECTION.

Familiar with ASME B31.1

Verifying the Valve hand wheel orientation and flow direction as per drawing.

Line installation and Straightness of the Erected line.

Pre-hydro test completed Line checking

Reviewing of Hydrostatic Test Packages.

Carry out Hydro test / pneumatic tests

Able to obey all safety rules.

Able to quality checking and minimize material losses.

To Ability to Plan, Organize. Monitor and control.

Able to monitoring the site, work load and man power.

Pre-fabricated pipes checking and fit up check.

Performing inspection and testing as per Q.C. procedure and Client Specifications.

Inspection of Raw materials like pipes, plates, Flanges, Clad plates. Includes

correlation of Heat numbers, Material test certificates review, Visual and

Dimensional of raw materials.

Inspection and ensuring dimensions of fabricated structures as per approved

drawing requirements.

Preparation and compiling of Q.C. Documentation

Experiences:

CURRENT COMPANY : ARABIAN BEMCO CONTRACTING CO. LTD.

Designation : QA/QC-Mechanical Engineer

Duration : 1st October, 2012 to till now

Project Involved : 3175MW, Qurayyah Combined Cycle Power

Plant Project, QCCPP-II, Al-Khubar, KSA.

COMPANY : SEJONG CORPORATION (SAUDI ARABIA)

Designation : QA/QC-Mechanical Engineer.

Duration : 15th April, 2011 to 30th September, 2012

Project Involved : 3175MW, Qurayyah Combined Cycle Power

Plant Project, QCCPP-II, Al-Khubar, KSA.

COMPANY : RELIANCE FABRICATIONS (P) LTD.

Designation : QA/QC- Mechanical Engineer

Duration : 05th July, 2010 to 1st March, 2011

Project Involved : Heat exchangers Vessels and Process

Equipment etc. Fabrication works.

COMPANY : G & E FABRICATION PVT. LTD (BHOPAL, M.P)

Designation : QA/QC- Mechanical Inspector

Duration : 03rd January, 2008 to 31st February 2010.(Part time)

Project Involved : Fabrication works.

COMPANY : LARSEN & TOUBRO LIMITED. (JAMSHEDPUR)

Designation : QA/QC- Mechanical Inspector

Duration : 04th May, 2005 to 30th September 2007.

Project Involved : Piping Project of Tata Steel.

COMPANY : RELIANCE FABRICATIONS (P) LTD.

Designation : QA/QC- Asst. Mechanical Engineer

Duration : 8th Oct. 2001 to 30th April 2005.

Project Involved : Heat exchangers Pressure Vessels and Process

Equipment etc. Fabrication works.

Academic Qualification:

Passed Matriculation in the year of 1998 with 1st division Securing

69.71% marks under Bihar Secondary School Examination Board (B.S.E.B), Patna,

Bihar.

Other Qualification:

Welding Refresher Course conducted by The Indian Institute of Welding,

Jamshedpur (Branch) (IIW).

AUTO CAD course 2D Drafting & 3D Modeling Conducted by Al-Kabir

Polytechnic, Jamshedpur

ISO 9001:2000 Training

FMEA Training

TQM Training

COMPUTER SKILLS

Operating System : MS–Dos, MS-Windows (98, XP, 2000, NT).

Packages : Ms-Office2000, XP, Word, Excel, Power Point.

PERSONAL DETAILS:

Name : ATIQUE ZAMAN

Father’s Name : Md. Qamru Zaman

Date of Birth : 05.10.1982

Gender : Male

Nationality : Indian

Marital status : Married

Language known : English, Hindi & Urdu

Physical Status : Height- 5’6”, Weight – 70 Kg.

Contact Number : +91-776*******

Permanent address : S/o Md. Qamru Zaman

Zaman-Villa, Darzi Mohalla, Doranda,

Near- Hinoo Bridge, Ranchi-2

Jharkhand, India.

: PP No - : G 0117306,

Passport Details

Date of Issue : 25-10-2006

Date of Expiry : 24-10-2016,

Place of Issue : Ranchi

DECLARATION

I hereby declare that the information given above is true to the best of my knowledge

and belief.

Date : 22/02/2014

: Ranchi (India) ATIQUE ZAMAN

Place

Contact this candidate