Dennis W. Dunn

***** **** ******, ***********, ******* 33542

Home Phone: 813-***-**** Cell Phone: 813-***-**** Email: aceww9@r.postjobfree.com

OBJECTIVE:

To become associated with an organization where my experience and abilities in electro-mechanical drafting would be effectively

used.

SUMMARY:

Demonstrated proficiency and quality in the field of electro -mechanical drafting for over 25 yrs. Experience preparing documentation

showing detail and assembly of various machinery and mechanical devices. Experience preparing documentation for circuit board

assembly, schematic, and layout drawings used in the manufacture and assembly of electronic devices and components.

SPECIAL SKILLS:

Strong experience in using Autocad

Experience using Autodesk Inventor 3D

Knowledge of printed circuit board layout software: Pads PowerPCB, Altium, Scicards

EMPLOYMENT:

2007-2014 PdMA Corporation, Tampa, Florida (Sub-contractor)

Electro-Mechanical Draftsman

Responsibilities/Duties:

- Created documentation for manufacturing and assembly of Motor Testing Product into production.

Mechanical parts (metal/plastic) fabrication drawings. Isometric/3D assembly drawings. Circuit board assembly drawings.

Created 3D models of individual parts and assemblies.

( Autocad, Autodesk Inventor 3D)

- BOM preparation/manipulation. ECO implementation.

2006-2007 Trak Microwave, Tampa, Florida (Sub-contractor)

Electro-Mechanical Draftsman

Responsibilities/Duties:

- Drafting/redline/updates to misc machined metal pcbd housings. (Autocad)

- BOM preparation/manipulation

2004-2006 (Work out of my home) Wesley Chapel, Florida

Draftsman

Responsibilities/Duties:

- Drafting of Patent drawings: 2D and Isometric Views (Autocad R14)

1998-2004 Anaren Microwave Inc., East Syracuse, New York

Electro-Mechanical Draftsman

Responsibilities/Duties:

- Drafting of manufacturing test fixtures (Alum, Brass, Steel) and associat ed misc machined metal parts for in-house fabrication

(CNC machines).

- Drafting of Laminated Circuit Assy drawings used for in -house manufacturing. Parts List / Bills of Material.

(Autocad R14/2000/2002, MAPICS, AS400)

- Arrayed/Panalized artworks of RF designs incorporating tooling, gerber files, and drill files for in -house and out-sourced artwork

films and pcbd fabrication. (Autocad R14/2000/2002, Autogerb, Camtastic)

- Lay-out of RF (micro-strip) 50 Ohm test boards for in-house designed surface mount parts such as power dividers, couplers, baluns,

filters, and circulators. (Autocad R14/2000/2002, Serenade)

- Lay-out of multi-layer, digital, analog, smt, pcbd. Schematic capture. Creation of gerber files, drill files, smd x -y coordinate files,

and associated assembly drawings. (PADS PowerPCB ver 2.1, Power Logic ver 1.1, Cam350, Autocad R14,2000/2002)

- Lay-out of RF (micro-strip) PC Boards with printed power dividers and couplers. Phase Matching. Laminted Circuit Assembly

Technolgy (buried/embedded smd's). (Autocad R14/2000/2002)

- ECN/ECR creation and implementaion. Documentation Control.

1992-1998 PHILIPS Broadband Networks Inc., Manlius, New York

Printed Circuit Board Designer/Draftsman

Responsibilities/Duties:

- Lay-out of single, double sided, multi-layer, smt and thru-hole, analog, digital and pwr supply pcbd designs.

(Pads PowerPCB ver 2.1, Autocad R14)

- Created mfg support documentation and output files such as schematic capture, pcbd assy dwgs, final assy dwgs, housing assy

dwgs, machined housing dwgs, pcbd fab/drill dwgs, part lists, gerber files, drill files, and smd x -y coordinate files.

(Pads PowerPCB ver 2.1, Pads Logic ver 1.1, Autocad R14, Autogerb, Cam350, MAPICS AS400)

- Creation and maintaining component library. (Pads PowerPCB ver 2.1, Pads Logic)

- ECN creation and implementation. Document Control.

- Followed design from prototype thru mfg release phase, working in environment focusing on design for manufacturability (DFM)

and design for test (DFT), with emphasis on teamwork with electrical, manufacturing, and test engineers throughout entire des ign

phase.

1989-1992 General Electric, Liverpool, New York (Sub-contractor)

Printed Circuit Board Designer/Draftsman

Responsibilities/Duties:

- Lay-out of multi-layer (buried/blind vias) pcbd designs. (Scicards)

- Lay-out of double sided pcbd designs. (Applicon)

- Cabinet cable assembly drawings. (Applicon)

- Created running/routing lists for cabinet cable assemblies, including information such as source and destination of individual wires

in cable assembly, type of terminals, type, color, guage, and length of wires, and type and length of heatshrink tubing used.

1987-1989 General Electric, Utica, New York (Sub-contractor)

Electro-Mechanical Draftsman

Responsibilities/Duties:

- Incorporated changes (ECN's) to existing pcbd and final assy dwgs. (Applicon)

- Incorporated changes (ECN's) to existing pcbd designs. (Applicon)

- Drafting of metal parts with punched out locations used for heating sinking purposes on pcbd assemblies. (Applicon)

- Digitizing existing manually drafted lay-outs of double sided pcbd designs. (Applicon Digitizer)

1986-1987 PHILIPS Electronics, Tampa, Florida (Sub -contractor)

Printed Circuit Board Designer/Draftsman

Responsibilities/Duties:

- Lay-out of double sided analog/digital pcbd design. (Autocad R13)

- Created pcbd assembly drawing. (Autocad R13)

1981-1986 General Electric, East Syracuse, New York

Electro-Mechanical Draftsman

Responsibilities/Duties:

- Schematic/Logic Capture. (Applicon)

- Drafting of various drawings such as Cable Assy dwgs, Specification Control dwgs, Source Control dwgs, and Purchased Part

dwgs. (Applicon)

- ECN implementation of variuos types of mechanical and assembly drawings. (Applicon)

- Lay-out of double sided, multi-layer, smt, thru-hole pcbd designs.(Applicon, SciCards)

- Created support documentation such as pcbd assy dwgs, final assy dwgs, and fab/drill dwgs. (Applicon)

1977-1980 U.S. Army, Ft. Hood Texas

Helicopter Crew Chief/Mechanic

Responsibilities/Duties:

- Scheduled maintenance of an OH-58 helicopter in a Military Police Unit

EDUCATION:

1974-1977 C.W. Baker High School, Baldwinsville, New York

Mechanical Drafting (3 years)

1980-1981 BOCES Technical School, Liverpool, New York

Mechanical Drafting and Blueprint reading

Contact this candidate