Chapter *
JEROME LAMELA JUANITAS
B*L* blooming hills subd,tikling taytay rizal.
Email : **********@*****.***
Mobile :090********
MICROTEL HOTEL AND RESORT
Company
OPERATED BY- CORAL WAY CITY HOTEL.
Coral way cor. Seaside mall of Asia complex Pasay city.
Position Engineering and Maintenance Supervisor April 15, 2011 up to March 15,2014
Job description
• Directly reporting to the group chief Engineer for corrective & preventive
maintenance schedule and safety implementation for guest and technical concern.
• In charged in all project renovation like general repainting and civil works,
fabrication grease interceptor, electrical installation for new equipment, Installation of
new feeder line using PPR. Pipe for pumping facilities.
• In charged in repair of all air-conditioning unit. From 1HP- 5TR split type and
inverter type, modification and repair and preventive repair and maint of ice maker
equipment, repair of all LCD TV and all electronic board for el-safe deposit box
• Assist and performed technical works for repair and maintenance mechanical,
electrical facilities, generator 1000kva, schindler elevators, repair of all audio
equipment, rewinding of industrial and submersible pump motors.
• Daily Facilities monitoring for electrical and mechanical equipment
YEELOOFA DEVELOPMENT CORPORATION
Company
168 Shopping Mall, Binondo Manila
Position Electro-Mechanical and Generator Lead-man July 13, 2010 –April 10, 2011
Job Descriptions
• In charge in repair, preventive maintenance and implementing safety
Inspections monitoring in Escalators, elevators and generators units.
• Implementing and scheduling of daily monitoring and inspection,preventive Maintenance
of Generators equipment Caterpillar1020kva,375kva stand by type engine and Cummins
710kva Prime type engine)
Including the maintenance schedule updates for weekly, semi-annual/yearly
• Repair and maintenance of Mitsubishi generator series 2040 and 2060kva
Prime type engine.
• In charge in repair of all electronic boards for escalator, elevator
Including the rewinding of all industrial AC motor
• Monitoring and Repair and preventive maintenance of all fire pumps including jockey,
Booster pumps motors and sanitary & sewage treatment plant Facilities.
• Assist the maintenance Engineer in planning, supervision, and
Performing all the activities related to preventive maintenance, repair and
Improvement of machine and facilities according to engineering standard
• Monitoring of power center parameter specially 34.5 kV Supply - 480 volts and all
automatic transfer switch control panel, capacitor bank. Base on the Philippine electrical
code standard requirements for commercial Facilities
TOURIST ACCOMODATION DEVELOPMENT INC.
Company
Halina Hotel. Old Sta. Mesa Manila.
Position Electro-Mechanical Lead Man
November 09, 2009 – May 09, 2010
Job Description
• Directly responsible in all corrective and preventive maintenance
For all branches especially in water chilled chiller 60hp-3phase & Cummins
Generator 250kva -3phase
• Performed all in house repairs for dump Elevator, all pumping equipment.
• Rewinding of compressor 60hp Coppeland
• Repair and maintenance of commercial refrigeration chiller
• Inspection and maintenance of repair dump waiter food service elevator
•
Company GREENAIRE PRODUCT AND SERVICE, INC.
GREE- AIRCONDITIONING COMPANY
(Exclusive Distributor and Service Center of Ugong Trade
Chapter 2
Holding Inc.)
JMP Bldg, Jose Cruz St., Barrio Ugong, Pasig City
Position Technical Service Supervisor / Engineer
May 05, 2009 – October 30, 2009
Job Description
• Directly in charge in all Authorized Service center nation wide
For Scheduling of Preventive Maintenance repair and Installation
• Monitoring of all Service report came from field technician and service center.
• Preparation of project proposal and Quotations including project accomplishment report
for billing and warranty
• Preparation of site survey and project inspection commissioning including the warranty
report
• Responsible in Leading in The Technical Repair and Service Dept. Including The
Facilities Equipment, Scheduling of Maintenance
• In charge in Restoration and Repair of Mc Quay water Chiller 25HP
• Repair and Preventive Maintenance of Chiller. Including Compressor rewind 25HP
Copeland 3phase 24 toner
•
Company EGI INCORPORATED / CLUB SERENE RESORT INC.
Cabrera Road, Barangay Dolores Taytay Rizal
Position Master Electrician / Materials Controller
November 1, 2008 – April 30, 2009-(Project Base Only)
Job Description
• Directly in charge in maintenance and construction renovation project in electrical; Air
conditioning.
• Preventive and repair of single phase and three phase motor for transfer pump, filter
pump and submersible pumping motor;
• ACU System reprocess, repair and maintain of split and window type air conditioning;
• Rewind and repair submersible pumping motor
• Project in- charge in water treatment facilities installation of sub pump 480volts for
main water supply of resort
Company HOTDOG ON STICK CORPORATION
FCL Center 1049 Aurora Boulevard cor.
Katipunan Ave., Loyola Heights, Quezon City.
Position Maintenance Supervisor
May 1, 2008 – October 30, 2008
Job Description
• Directly supervise all maintenance and repair schedule including Equipment, status
nationwide
• In charge in renovation and construction including preparation of plan and schedule of
load of store outlet;
• Assist and perform the repair of kitchen and fast food equipment including gas and
electric operated equipment, refrigeration and air-conditioning repair and maintenance;
• Preparation of daily, weekly and monthly report of equipment and status
Company TESPA JOINT VENTURE (maintenance provider of LRTA Line 2 system)
LRTA Depot Santolan Pasig City.
Position Electrical Air con Technician-A
June 16, 2007 - June 31, 2008
Job Description
• Repair of pneumatic hydraulics system specially in breaking and door Module unit
• Directly in charge in repair of static inverter and variable voltage, variable frequency
Controller unit.
• Repair and system re-process of carrier commercial air-conditioning, re-condition rewind
of compressor motor 10toner3phase ACU retro fitting from R22-134a general over-
hauling maintenance including electrical, mechanical component
Company LIGHT RAIL TRANSIT AUTHORITY LINE 2
Philippine Government Agency under Department of Transportation and Communication
[DOTC]
Position Electro - Mechanical Foreman
May 19, 2003 – June 15, 2007
Job Description
• Assists and performs the necessary tasks assigned by the Supervising Engineering B
( Rolling Stock ) especially for emergency repair unit in electrical, electronics and air
conditioning;
• In charge of ACU Unit System re-process and repair of evaporator, condenser and
compressor motor repair of electronic module.
• Assist and performs all AC motor single phase and three phase rewinding and
reconditioning compressor motor overhead cranes drive motor, submersible pump motor
and low-high voltage DC motor;
• Responsible in leading the train mechanics and senior transport electrician group during
the shift;
• Directly supervise all maintenance work for any assigned shift, such as scheduled
maintenance, unscheduled maintenance and repair, including immediate subordinates
(Technicians) to ensure that the given instruction is properly executed and is on
schedule
Company TRANSPORTATION AND ENGINEERING SERVICES, PHILIPPINES INC. ( TESP )
(maintenance provider of Metro Rail Transit MRT 3 )
MRT Depot EDSA Quezon City
Position Senior Electrical & Electronic Tech.
March 13, 2001 - May 12, 2003
Job Description
• Monitoring the Electrical and Mechanical equipment including calibration of breaking
system and repair and troubleshooting the electronic controls for low and high
voltage750vdc.
• Maintenance and Repair of Thermo King ACU unit including the PLC re -programming
of system cycle.
• Rewind of burned ACU fan and AC-DC motor design for high voltage railway air-
conditioning unit.
• Repair Electrical and Electronic Defective module like static inverter and break chopper
including IPM, IGVT. Replacement
Company AA STEEL TECH INC.
Aurora Boulevard cor. G.Reyes Street San Juan Metro Manila
Position Assistant Electrical Supervisor
August 12, 1999 – November 15, 2000
Job Description
• Preparation of all power tools and electrical equipments for construction project;
• Repair of defective power tools, motor and welding machine;
• Installation of AC and DC generator unit in project site
• Preparation of project construction layout for electrical
Company CENTREX CORPORATION INC.
206 Pillar Street cor. Shaw Boulevard Mandaluyong City
Position Electrical Technician / Draftsman
January 1992 – August 1, 1999
Job Description
• Preparation of blueprint layout for exhibit project installation;
• Installation of High Voltage transformer 3 phase step down supply for exhibitors during
project;
• Plant electrical and air-con maintenance;
• Preparation of accomplishment project report .
ACQUIRED SKILLS & KNOWLEDGE
Electro-mechanical elevator and escalator repair and maintenance. Specially in Hyundai, Otis and Mitsubishi
Generator repair and maintenance caterpillar, Cummins & Mitsubishi prime type model.
Electrical trouble shooting industrial and building installation
Commercial-HVAC-Refrigeration,-Air-conditioning service Repair and maintenance;
Electronic Audio-Video; Industrial high voltage Electronics circuit;
Material Planning and preparation for electrical and air-conditioning Preventive schedule and maintenance
specially in electro –mechanical
ELIGIBILTY
Registered Master Electrician [RME] April 26, 2000 PRC Manila
TESDA-NC2, Commercial Refrigeration and Air-Conditioning TESDA Marikina city
EDUCATIONAL BACKGROUND
Technological Institute of the Philippines Bachelor of Science in Electrical Engineering
Aurora Boulevard Quezon City
SY. 1991-1996
Marikina Polytechnic College Commercial and HVAC Engineering
Marikina City -2007
Engineering up grading Course
Meralco Foundation Institute Industrial Transformer and Motor Rewinding
Pasig City Ortigas Campus
January 24, 2000 to February 18, 2000
Meralco Foundation Institute Building Electrical and Wiring Installation
Pasig City Ortigas Campus
January 14, 1998 to February 13, 1999
TRAININGS AND SEMINARS
Hytorc Philippines – Bolting Technology LRTA Line 2 Depot Santolan Pasig City
Torque and Tension Tools and Equipment Solution April 24, 2006
Sparking Customer Service a Creativity Approach Gree Main Office
Jmp Building Ugong, Pasig City
June 20, 2009
Audio vedio electronics and industrial Xavier Technical Training Center
Antipolo City
May 2005 – August 8, 2005
Rolling Stock Train and troubleshooting maintenance Electro- Mechanical- Course
LRTA Line 2 Depot Santolan, Pasig City
November 27, 2003 – December 17, 2003
Under Floor Wheel Lathe, Truing Machine course October 15, 2003 – October 31, 2003
Technirail, Sculfurt LRTA Santali Pasig City
Rolling Stock Train Operation and driving course August 11, 2003 – August 26, 2003
LRTA Operation Department
Radio Land Mobile Seminar National Telecommunication Commission
LRTA Depot Santolan, Pasig City
August 11, 2003
Safe Operation of Race Truck & Forklift Metro Rail Transit Depot
Edsa Quezon City
August 2, 2001
Industrial Carbon and Maintenance and Technology Metro Rail Transit Depot
Edsa Quezon City
October 8, 2001
PERSONAL INFORMATION
Age : 37
Weight : 143 lbs.
Height : 5’ 8”
Blood Type : AB
Birthday : January 1, 1976
Religion : Catholic
Civil Status : Single
CHARACTER REFERENCES
Engr. Rogelio T. Cabanilla Principal Engineer B
LRTA Line 2 Maintenance Audit
LRTA Line 2 Depot Santolan Pasig City
Tel No. 647-3479
Ms. Vicky M. Ong AVP – Mall Operation/HRD
Yeeloofa Development Corporation
3/F 168 Shopping Mall Binondo Manila
Tel No. 353-5586
Engr. Aido E. Caballero Group Chief Engineer
Paramount and Microtel
Coral way cor. Sea side mall of Asia complex Pasay city
Tel #403-3333 loc # 583