Quality Control Engineer
Resume:
RESUMÉ
MARLON C. BELEZ
City Address : ***-I *th Ave. East Rembo, Makati City, Philippines
Tel. No. : (006**-******* & Mob. No.: (0063)-906-***-****
Provincial Address : #69 San Vicente, Macabebe, Pampanga
Email. : ***********@*****.***
Qatar-Mob. No.:(009**-********& (009**-********
EDUCATIONAL ATTAINMENT
Saint Paul University, Tuguegarao, Cagayan
Bachelor of Science in Civil Engineering
Graduated in March 1989
WORK EXPERIENCE
February 6, 2007 to present
Green Point Readymix Concrete
P.O. Box 7052, Doha, Qatar
Tel. No. +974-***-**** / Mobile No. +974-****-****
Position : Technical Supervisor (QA/QC)
JOB DESCRIPTION : Responsible for the quality of all concrete being produced, delivered and placed;
supervision of all Quality Control works with regards to concrete mixture.
• Assigns qualified Q.C. personnel for every scheduled concrete pouring.
• Inspects every Batch Plant’s equipment and Laboratory apparatus for its precision and supervises its
verification testing for re-calibration, if needed.
• Prepares all Mix Designs for concrete production.
• Supervises and conducts trial mixes for designs required by clients and any new concrete mixtures.
• Responsible for the monitoring and review of all results for every test specimens from trial mixes and
actual pouring.
• Responsible for all quality problems’ investigation of its cause and supervises recommended remedial
measures or repair works.
• Conducts orientations for new Q.C. personnel regarding basic knowledge of quality control for
concrete production.
• Make researches and trials for concrete mixes cost reduction in using other raw materials and
improve its performance at the same time.
• Assists Sales Department in bidding and marketing of concrete products to prospective clients.
• Prepares daily, weekly and monthly all raw materials reconciliation reports.
December 30, 2004 to January 10, 2007
Doha Beton Readymix Co.
P.O. Box 1606, Doha, Qatar
Tel. No. +974-***-****
Position : Quality Control Supervisor
JOB DESCRIPTION : Responsible for the quality of all concrete being produced, delivered and placed;
supervision of all Quality Control works with regards to concrete mixture.
• Assigns qualified Q.C. personnel in every Concrete Batching Plants that will handle all quality control
works.
• Inspects every Batch Plant’s equipment and Laboratory apparatus for its precision and supervises its
verification testing for re-calibration, if needed.
• Prepares all Mix Designs for concrete production.
• Supervises and conducts trial mixes for designs required by clients and any new concrete mixtures.
• Responsible for the monitoring and review of all results for every test specimens from trial mixes and
actual pouring.
• Responsible for all quality problems’ investigation of its cause and supervises recommended remedial
measures or repair works.
• Conducts orientations for new Q.C. personnel regarding basic knowledge of quality control for
concrete production.
• Make researches and trials for concrete mixes cost reduction in using other raw materials and
improve its performance at the same time.
• Assists Sales Department in bidding and marketing of concrete products to prospective clients.
• Prepares daily, weekly and monthly all raw materials reconciliation reports.
August 1, 2001 – June 1, 2004
Abdulrazzak Qanbar Al-Ansari & Sons Co. Ltd.
Ready Mix Division
P.O. Box 9, Dammam,
Kingdom of Saudi Arabia 31411
Position : Senior Quality Control Technician
JOB DESCRIPTION : Responsible for the quality of all concrete being produced, delivered and placed;
supervision of all Quality Control works with regards to concrete mixture.
• Check all Laboratory equipments and apparatus that need for re-calibration.
• Prepares some Mix Designs for new prospects of projects and customers.
• Monitor and schedule Batch Plant’s calibration dues.
• Supervises and conducts trial mixes for designs required by clients and any new concrete mixtures.
• Responsible for the monitoring and review of all results for every test specimens from trial mixes and
actual pouring.
• Responsible for all quality problems’ investigation of its cause and supervises recommended remedial
measures or repair works.
• Conducts orientations for new Q.C. personnel regarding basic knowledge of quality control for
concrete production.
• Prepares monthly compressive testing reports for Standard Deviation.
• Prepares daily, weekly and monthly all raw materials reconciliation reports.
September 1, 1996 – February 12, 1999
EXAN BUILDERS CORPORATION
72 Interior Santos St., Santolan
Pasig City
Position : Quality Control Manager
JOB DESCRIPTION : Responsible for the quality of all concrete being produced, delivered and placed;
supervision of all Quality Control works with regards to concrete mixture.
• Assigns qualified Q.C. personnel in every Concrete Batching Plants that will handle all quality control
works.
• Inspects every Batch Plant’s equipment and Laboratory apparatus for its precision and supervises its
verification testing for re-calibration, if needed.
• Prepares all Mix Designs for concrete production.
• Supervises and conducts trial mixes for designs required by clients and any new concrete mixtures.
• Responsible for the monitoring and review of all results for every test specimens from trial mixes and
actual pouring.
• Responsible for all quality problems’ investigation of its cause and supervises recommended remedial
measures or repair works.
• Conducts seminars and orientations to new and co-employees regarding basic knowledge of quality
control in concrete production.
• Make researches and trials for concrete mixes cost reduction in using other raw materials and
improve its performance at the same time.
• Assists Sales Department in bidding and marketing of concrete products to prospective clients.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
1.) Project Name : Taguig Batching Plant
Address : C-5 Brgy. Ususan, Taguig, Metro Manila
Assignment Period : October 10,1995 – September 1, 1996
Position : Quality Control Head
JOB DESCRIPTION :
• Supervises all the Quality Control works concerning concrete production and other quality related
works.
• Initiates selection of appropriate personnel and assigning workloads for the whole organization.
• Prepares and conducts trial mixes for every new concrete mix designs required by supposed clients.
• Monitors all concrete specimens’ test results from trial mixes and actual pouring for strength
evaluation.
• Responsible for the control of all mix designs needed for adjustments and upgrading of its
performance.
• Conducts spot inspection on every Batching Plants and Projects to reassure if Quality Control
procedures were properly implemented.
• Supervises all calibration needed for all Batching Plants and Q.C. Laboratory’s equipment to reassure
its precision.
• Maintains a close interaction with all the clients’ projects to support and assist in their needs regarding
quality.
• Submits reports to the management on any development, issues and problems concerning the quality
of the product.
• Make researches on how to reduce the cost of the concrete product by using other raw materials
without affecting the good quality and its performance.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
2.) Project Name : Bases Conversion Development Authority – Mass Housing
Address : C-5 Circumferential Road, Fort Bonifacio, Makati City
Assignment Period : May 5,1995 – October 10, 1995
Position : Construction Superintendent
JOB DESCRIPTION :
• Implements all detailed work plan and work schedule that will be disseminated to field supervisors for
implementation.
• To guide and control on how to determine the priorities in the availment of materials supplies,
equipment and manpower among the different trades.
• Consolidate and prepare information and feedback from the project site through reports.
• Implements the standard quality control procedures to ensure acceptance of the completed product.
• Manage the total field operation including : manning, equipment deployment and utilization, materials
control / scheduling, and coordination with subcontractors.
• Monitors and coordinates all the activities of the different trades and see to it that it conforms with the
agreed work sequence and work plan.
• Briefs and instructs field supervisors regarding the contents of the plans, shop drawings,
specifications and other special requirements needed and proceed with regular supervisor
coordination meeting.
• Implements safety and precautionary procedure within the job site.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
3.) Project Name : Mariveles Grains Terminal and San Miguel Corp. – Malt Silo Storage
Address : Mariveles Harbour, Bataan
Assignment Period : May 24, 1994 – May 5, 1995
Position : Batch Plant In-Charge
JOB DESCRIPTION (BATCH PLANT IN-CHARGE):
• Supervises all works concerning Batching Plant operations and ensures strict implementation of
quality control procedures.
• Prepares all concrete mix designs for batching plant actual production and supervises all trial mixes
and actual trial batches.
• Initiates selection of qualified personnel and assigning workloads for the whole organization.
• Monitor and review all raw materials stocks’ position and consumption to determine every
requirement for delivery requisitions.
• Secure necessary documents, certificates and other requirements needed to operate such plant.
• Review all test data from trial mixes and actual productions to ensure the quality and performance of
the product.
• Supervises all calibrations (if needed) for all Batching Plants and Laboratory equipment and
apparatus to ensure precision of work.
• Conducts spot inspection on plant and field during pouring to ensure that quality control procedures
were strictly implemented.
• Sets periodic production targets and formulate work plans or strategies to meet these targets to
satisfy the total project requirements.
• Reports to Project Management regarding documents, issues and problems concerning batching and
quality control.
• Submits proposals to Project Management with regard to batching cost reduction without affecting the
quality of products.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
4.) Project Name : Pilipinas Shell Refinery
Address : Tabangao, Batangas
Assignment Period : April 26, 1993 – May 24, 1994
Position : Batch Plant In-Charge
JOB DESCRIPTION (BATCH PLANT IN-CHARGE):
• Supervises all works concerning Batching Plant operations and ensures strict implementation of
quality control procedures.
• Prepares all concrete mix designs for batching plant actual production and supervises all trial mixes
and actual trial batches.
• Initiates selection of qualified personnel and assigning workloads for the whole organization.
• Monitor and review all raw materials stocks’ position and consumption to determine every
requirement for delivery requisitions.
• Secure necessary documents, certificates and other requirements needed to operate such plant.
• Review all test data from trial mixes and actual productions to ensure the quality and performance of
the product.
• Supervises all calibrations (if needed) for all Batching Plants and Laboratory equipment and
apparatus to ensure precision of work.
• Conducts spot inspection on plant and field during pouring to ensure that quality control procedures
were strictly implemented.
• Sets periodic production targets and formulate work plans or strategies to meet these targets to
satisfy the total project requirements.
• Reports to Project Management regarding documents, issues and problems concerning batching and
quality control.
• Submits proposals to Project Management with regard to batching cost reduction without affecting the
quality of products.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
5.) Project Name : Magat Bridge
Address : Cabatuan, Isabela
Assignment Period : September 2, 1992 – April 26, 1993
Position : Quality Control Engineer
JOB DESCRIPTION (QUALITY CONTROL ENGINEER):
• Prepares all required quality testing and all concrete mix designs needed for the project.
• Conducts all necessary testing on every delivery of raw materials to ensure if its quality will pass the
specification requirements.
• Conducts all in-house laboratory and field quality testing as per requirement.
• Monitors and schedules every materials quality testing that will need representatives from the owners’
side.
• Reports to Project Management any problems and issues concerning quality and submit
recommendations for any remedial measures needed.
• Monitors and compiles all test reports for submittals.
• Checks and monitors batching operation to ensure if approved concrete mix designs were followed
and quality control was strictly observed.
• Monitors and assists site pouring in concrete mixtures adjustments on slumps and other quality
problems during delays on work (concrete placing and spreading).
• Prepares concrete specimens from actual pouring and record necessary data with respect to the
actual samples and ensure its safety during setting and curing period.
• Check the precision of all laboratory and plants’ equipment and request for re-calibration, if
necessary.
• Prepares proposals for mix designs adjustments or cost reduction on concrete mix based on trial
mixes, and test reports being evaluated. And submit to Project Management for approval.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
6.) Project Name : Bayview Tower Batching Plant
Address : Coastal Road, Brgy. Tambo, Paranaque City
Assignment Period : December 11, 1990 – September 2, 1992
Position : Quality Control Engineer
JOB DESCRIPTION (QUALITY CONTROL ENGINEER):
• Prepares all required quality testing and all concrete mix designs needed for the project.
• Conducts all necessary testing on every delivery of raw materials to ensure if its quality will pass the
specification requirements.
• Conducts all in-house laboratory and field quality testing as per requirement.
• Monitors and schedules every materials quality testing that will need representatives from the owners’
side.
• Reports to Project Management any problems and issues concerning quality and submit
recommendations for any remedial measures needed.
• Monitors and compiles all test reports for submittals.
• Checks and monitors batching operation to ensure if approved concrete mix designs were followed
and quality control was strictly observed.
• Monitors and assists site pouring in concrete mixtures adjustments on slumps and other quality
problems during delays on work (concrete placing and spreading).
• Prepares concrete specimens from actual pouring and record necessary data with respect to the
actual samples and ensure its safety during setting and curing period.
• Check the precision of all laboratory and plants’ equipment and request for re-calibration, if
necessary.
• Prepares proposals for mix designs adjustments or cost reduction on concrete mix based on trial
mixes, and test reports being evaluated. And submit to Project Management for approval.
D.M. CONSUNJI, INCORPORATED
1881 Pres. Quirino Ave. Ext.
Pandacan, Manila
7.) Project Name : SM Mega Mall
Address : Edsa, Mandaluyong City
Assignment Period : July 3, 1989 – December 11, 1990
Position : Quality Control Engineer
JOB DESCRIPTION (QUALITY CONTROL ENGINEER):
• Prepares all required quality testing and all concrete mix designs needed for the project.
• Conducts all necessary testing on every delivery of raw materials to ensure if its quality will pass the
specification requirements.
• Conducts all in-house laboratory and field quality testing as per requirement.
• Monitors and schedules every materials quality testing that will need representatives from the owners’
side.
• Reports to Project Management any problems and issues concerning quality and submit
recommendations for any remedial measures needed.
• Monitors and compiles all test reports for submittals.
• Checks and monitors batching operation to ensure if approved concrete mix designs were followed
and quality control was strictly observed.
• Monitors and assists site pouring in concrete mixtures adjustments on slumps and other quality
problems during delays on work (concrete placing and spreading).
• Prepares concrete specimens from actual pouring and record necessary data with respect to the
actual samples and ensure its safety during setting and curing period.
• Check the precision of all laboratory and plants’ equipment and request for re-calibration, if
necessary.
• Prepares proposals for mix designs adjustments or cost reduction on concrete mix based on trial
mixes, and test reports being evaluated. And submit to Project Management for approval.
PERSONAL INFORMATION
Date of Birth : May 11, 1965
Place of Birth : Gattaran, Cagayan
Age : 48
Religion : Roman Catholic
Nationality : Filipino
Civil Status : Married
Name of Spouse : Marjesa C. Belez
SEMINARS / TRAINING ATTENDED
• FOSROC Construction Products Seminar
- August 25, 1993
• Seminar on Construction Materials Quality Control
- August 29 – 31, 1995
• Troubleshooting Concrete Problems in the Field
- February 2, 1996
• Total Quality Management Workshop
- June 14 – 15, 1996
• Fresh Concrete Tester – 101 Training
- October 21, 1996
• Conference on Concrete Arts, Sciences and Technologies
- June 5 - 6, 1998
Edsa Plaza Hotel
CHARACTER REFERENCES
Mr. Antonio Robles - General Manager
Exan Builders Corporation
Tel No. 646-1008, 681-2223
Engr. Jesus Prindiana - Project Manager
D.M.Consunji Incorporated
Tel. No. 50-4641
Engr. Ronald Serra - Concrete Engineer
Buildcon Concrete
Tel No. 03-782-6488, 783-7500
Engr. Francisco Zalameda,Jr. - Operations Manager (RMC)
D.M.C.I. – Taguig Batching Plant
Tel No. 632-***-****
Mr. Amarendra Dheer - Technical Manager
Abdulrazzak Qanbar Al-Ansari & Sons Co. Ltd.
Dammam, Kingdom of Saudi Arabia
Mr. Ernst Koenig - General Manager
Doha Beton Readymix Co.
P.O.Box 1606, Doha, Qatar
Tel No. (009**-***-****
Mr. Waleed Obeideen - Production Manager
Green Point Readymix Concrete Co.
P.O.Box 7052, Doha, Qatar
Mob. No. 558-71482
I hereby certify that the above statements and details are true at the best of my knowledge.
Marlon C. Belez
Contact this candidate