GULMIR HASAN HAIDERY
H.No- **/***, Momin Para Behind Haidery Mosque, Raipur, Chhattisgarh, INDIA
Contact No : +221********* E-mail :
aceea8@r.postjobfree.com
aceea8@r.postjobfree.com
Objective
A highly motivated peak performing professional with 4 years work
experience with companies like Ericsson, Nokia, Alcatel-lucent and ZTE and
keen to join a well managed professional organization where my logical and
technical expertise can be properly utilized and will augment my skills and
capabilities as a RF Planning and Optimization Consultant.
Professional Synopsis
> RF Planning and Optimization Engineer with 4 years of experience in
Telecom Industry.
> In current project I am working as RF/3G Engineer Consultant with
Ericsson Senegal.
Organizational Experience
CONSULTANCY -- FIRST POINT GROUP
DESIGNATION -- 3G Optimization & Drive Testing Engineer
ROLE -- Radio Network Optimization
PERIOD -- January 2014 - Till today
LOCATION -- Dakar, Senegal
CLIENT -- Tigo Senegal
Job Responsibilities:
> Expertise in UMTS, HSDPA.
> Achieving KPI target for Accessibility, Retainability, Integrity,
Mobility and availability (CS, PS, and HSDPA).
> Optimize HSDPA and HSUPA for W11 clusters on UMTS 2100 MHz bands.
> Creation and analysis GPEH of UETR (IMSI) and CTR on WCDMA RAN
Measurements.
> Daily worst cell analysis for CSR, DCR, BLER, throughput HSDPA, HSUPA,
IRAT UMTS to GSM using BO and recommending suitable changes for
Improving KPIs.
> Responsible of new features and services introduction impact
evaluation like MIMO 2*2,CPC,HS Dual carrier,15 codes etc. Diagramming
and execution of diverse tests in conjunction with other teams within
the project.
> Extensive knowledge of KPIs, Counter and Parameters.
> Proficient in using TEMS Investigation, MapInfo, TEMS Cell planner
Universal 8.1 and its automatic frequency planning and prediction
plots. Network Audit & Benchmarking and improving the Network GoS
using CDD dumps.
> Responsible for parametric optimization on cell and RNC level.
> Finding and Analyzing worst performing cells and doing needful
optimization to improve the performance.
> Expertise in RAN Explorer, Element Manager and Ericsson OSS.
> Preparation of Nominal Plan & finalizing it with Customer.
> Analyzing Site Survey Reports (TSSR) and prioritizing candidates for
Technical Site Survey.
> Pre Surveys of sites to verify nominal cell plan and propose changes.
CONSULTANCY -- FINCON
DESIGNATION -- RF Drive Testing & Optimization Engineer
ROLE -- Radio Network Optimization
PERIOD -- October 2013 - December 2013
LOCATION -- Dakar, Senegal
CLIENT -- Tigo Senegal
Job Responsibilities:
> Daily worst cell Analysis using BBH, NBH and CDD Reports.
> Responsible for drive test for analyzing RF coverage and quality
issues. Log-File analysis using TEMS Investigation Drive Testing and
Physical optimization when required.
> KPI analysis of TCH, SDCCH, CDR, CSSR, PSR, HOSR, TCH Utilization,
GPRS, EDGE performance on the basis of ND reports.
> Handover Pre/Post RF acceptance documents from Vendor.
> Post Processing using MapInfo Professional, SQI, Coverage, Quality, Rx
Lev Sub/Full and different RF indicators.
> Monitoring KPIs and proposed different parameter changes to ensure
post swap performance and instruct teams to maintain the quality.
COMPANY -- NSN India Pvt Ltd
DESIGNATION -- RF Optimization Engineer
ROLE -- RF Optimization
PERIOD -- September 2012 - October 2013
LOCATION -- Hyderabad, A.P (India)
CLIENT -- TATA Docomo, India
Job Responsibilities:
. Drive Testing and Physical optimization when required.
. KPI analysis of TCH, SDCCH, CDR, CSSR, PSR, HOSR, TCH Utilization,
GPRS, EDGE performance on the basis of ND reports.
. Handover Pre/Post RF acceptance documents from Vendor.
Daily worst cell Analysis using BBH, NBH and CDD Reports.
Responsible for drive test for analyzing RF coverage and quality
issues. Log-File analysis using TEMS Investigation.
. Post Processing using MapInfo Professional, SQI, Coverage, Quality, Rx
Lev Sub/Full and different RF indicators.
Monitoring KPIs and proposed different parameter changes to ensure
post swap performance and instruct teams to maintain the quality.
DESIGNATION -- Engineer RAN and Transmission
ROLE -- RF Planning and Optimization
PERIOD -- June 2012 - September 2012
LOCATION -- Kampala, Uganda
CLIENT -- Airtel Uganda
Job Responsibilities:
> Expertise in UMTS2100, UMTS900 and LTE1800.
> Extensive experience of HSPA+ optimization with 4 carriers.
> Excellent knowledge in 2G/3G/LTE radio optimization parameters, KPIs,
features and drive test analysis.
> Good knowledge in BSS/RNC/MME parameters.
> Tools experience (TEMS investigation/ Actix Business Object, ENIQ, OSS-
RC common explorer, Moshell, ESPA, NetQB).
> Good knowledge of Ericsson LTE products and service portfolio.
> LTE 3GPP standards, LTE RAN Air Interface and L3 signaling analysis,
LTE RAN Functionality-Knowledge of L13A radio features is a plus, LTE
RAN Performance Management-knowledge of pmCounters, LTE RAN Protocols
and Procedures, LTE System Techniques, LTE/SAE System Overview.
> Expertise on LTE planning, design and optimization concepts.
> Daily monitoring and analysis of SSSR, MPAR, Intra frequency HO SR,
WCDMA session continuity, CS fallback and connected users for LTE
network.
> Good Knowledge of CSFB implementation, PS connectivity and their
detailed analysis.
> Solving the problems related to HO/TAU/Throughput.
> MIMO designing and implementation.
> Multi-layer KPI analysis and optimization, multi carrier traffic
balancing, parameter audits, neighboring strategy for multi-carriers,
load sharing feature
implementation (IFHO,IFLS/Directed retry).
COMPANY -- NSN India Pvt Ltd.
DESIGNATION -- RAN Planning And Optimization
ROLE -- RF Planning And Optimization
PERIOD -- January 2011 - June 2012
LOCATION -- Bangalore, India
CLIENT -- TATA Docomo, India
Job Responsibilities:
> Extensive Planning and Optimization experience on National level
project.
> Expertise in GSM and UMTS.
> Radio Network Design and Optimization including Traffic Engineering,
Performance Evaluation, competitive analysis and planning for growth
for Network
> Practical experience in coverage and capacity planning, neighbor
planning, frequency planning and interference analysis to achieve
optimal system performance
> To review the project plans and understands the requirements.
> To follow the project plan and insure that the vendor is working
according to standards.
> Pre/Post Swap Drive Test using TEMS Investigation GSM (Dedicated,
Idle, Scanning Mode)
> Proposed Driver routes for Swap drives.
> Log-File analysis using TEMS Investigation.
> Post Processing using MapInfo Professional, SQI, Coverage, Quality, Rx
Lev Sub/Full and different RF indicators.
> Monitoring KPIs and proposed different parameter changes to ensure
post swap performance and instruct teams to maintain the quality
> Proficient in using TEMS Investigation, MapInfo, TEMS Cell planner
Universal 8.1 and its automatic frequency planning and prediction
plots. Network Audit & Benchmarking and improving the Network GoS
using CDD dumps.
> Extensive knowledge of various RF optimization procedures to achieve
KPI targets.
> Analyzing Network KPIs with Business Objects and Aircom Optimization
tool optima on daily basis and recommending suitable changes for
Improving KPIs.
> Achieving KPIs during pre and post launch of AirTel in Rwanda.
> Responsible for parametric optimization on cell and RNC level.
> Coordinating for pre launch DT and SCFT for new node B.
> Finding and Analyzing worst performing cells and doing needful
optimization to improve the performance.
> Preparing CNAI files for new and expansion sites.
> Responsible for new site AT as per contractual KPI meeting.
> Analyzing drive test and indicating problematic areas and recommending
changes.
> Monitoring the performance of the BSCs and issuing the Change Request
for the desired changes.
> Preparation of Nominal Plan & finalizing it with Customer.
> Analyzing Site Survey Reports (TSSR) and prioritizing candidates for
Technical Site Survey.
> Pre Surveys of sites to verify nominal cell plan and propose changes.
> Running Coverage Predictions on AIRCOM's ASSET & Ericsson's TCPU.
> Planning Re homings based on Capacity of BSCs.
COMPANY -- GTL Innovsource, India
DESIGNATION -- RF Survey and Drive Test Engineer
ROLE -- RF Planning, Initial Tuning and Optimization
PERIOD -- May 2010 - December 2010
LOCATION -- Hyderabad, India
CLIENTS -- TTSL, Ericsson
Job Responsibilities:
> Network Audit & Benchmarking and improving the Network GoS using CDD
dumps.
> Responsible for the drive test analysis and taking the necessary
action to improve the performance of his geographical area.
> Radio network parameters tuning such as Power control, IRC, HCS, AMR,
HOPB
> Preparing RAN utilization report for all the countries considering
full and half rate traffic.
> Worst cells analysis and troubleshooting on daily basis.
> Drive test log files analysis using TEMS Investigations and making
necessary parameter changes to improve network.
> Perform weekly KPI presentation of responsible BSCs for internal NPI
meetings.
> Good overall knowledge of GSM architecture, and Network performance.
Tools Used
RF PLANNING -- TCPU, Planet Ev,GIS, MapInfo, MCOM,ASSET
TX PLANNING -- Pathloss 4.0
POST PROCESSING -- TEMS Discovery, Genex Assistant
DRIVE TEST -- TEMS Investigation 6.0, 7.1, 8.2,
12.0,13.0,14.1
RNO TOOLS -- MRR, NCS, TEMS Visualization 9.2
OSS TOOLS -- CNA, CHA, BO, MTR, CTR, RPMO, STATIC,
NeXplorer
RAN TOOLS -- WINFOIL, OMT, MoShell,
SURVEY TOOLS -- RL Tool, Globber Mapper,Map Grid,SOI
Map,Clutter
Map,Google Earth, Site Master, Raster Map, Map
Source,GPS.
Educational Qualifications
> B.E. ( Electronics & Communication) with 66.5% from Raipur Institute
of Tecnology Affiliated by Chhattisgarh Swami Vivekanand Technical
University, Bhilai (C.G.) in 2010
> Passed H.S.C. examination from C.G.B.S.E. Board in 2006
> Passed SSC examination from C.G.B.S.E. Board in 2004.
INDUSTRIAL Training and Achievement
1. Five days training about GSM SYSYTEM SURVEY at NSN Hyderabad,(INDIA)
During this period I got knowledge about the NSN System Survey.
2. Five days training on GSM Cell Planning Principles-1 at NSN, Bangalore
(INDIA).
During this period I got Knowledge about frequency planning and traffic
dimensioning
And gain a basic understanding of the various radio network features
mention below:
> Perform traffic and coverage analysis
> Perform nominal Cell Plan
> Discuss and perform site surveys
> Discuss System Design and Implementation
> Discuss System Tuning
3.Five days training on RBS and BBS of 6000 series at Ericsson Uganda.
> During this period I got the basic knowledge of RBS
6000(GSM/WCDMA/LTE) and its BBS with proper site installation.
VOCATIONAL TRAINING
1. Two weeks training in B.S.N.L Fafadih, Raipur Chattishgarh (INDIA)
> During this period I got basic knowledge about the sites and was
involved in BSS.
> Understanding GSM system architecture.
> Cell Planning aspects and requirements.
> Logical channels (Traffic and signaling).
> Performance characteristics of GSM.
>
2. Two weeks training in Airport Authority of India, Raipur (INDIA)
> During this period I got basic knowledge about the working of a Air
Traffic Control Unit.
> Understanding Radar Technologies.
Computer Proficiency
Programming Languages -- C, C++, and FOXPRO
Operating Systems -- Windows xp, MS DOS
Other -- Power Point,
Excel,Word, Exert
Personal Details
Date of Birth -- 28.12.1989
Sex -- Male
Father's Name -- Mr. S.H.Haidery
Nationality -- Indian
Marital Status -- Single
Language Known -- English, Hindi, Arabic
Passport No -- H5313847
DECLARATION
All above information regarding me is true to my best of knowledge. If any
incorrect information will occur I will be held responsible for it.
Date: 25 May 2014
(GULMIR HASAN HAIDERY)
Place: Senegal