Electrical Design
Resume:
Stan Guzek
Stan Guzek
*********@***.***
Summary
Over 40 years experience in electrical design for power, chemical and industrial facilities. Experience includes
preparation of schematic, three line and one line diagrams;the physical design includes power distribution,
lighting, grounding, underground raceway, heat trace and area classification plans; construction support and
field surveys; and supervision of designers and drafters.
Clearance: D.O.E. “Q”
Experience
Electrical Design Engineer at Merrimac Associates Inc.
July 2011 - February 2014 (2 years 8 months)
Electrical Designer at Altran Solutions / Virtual Resources
September 2010 - July 2011 (11 months)
Responsible for engineering design,drafter supervision,checking and field survies for the power industry. This
design included sub-station tap changer control schematics modification, wiring diagrams and scada inputs.
The physical design and included electrical equipment arrangements, power distribution, lighting and
raceway system design.
Elect.Design Supervisor at URS – Princeton, NJ.
August 2007 - August 2010 (3 years 1 month)
Responsible for engineering design, design supervision, field survives and construction support for the power
industry. This design included 15 kv, 5 kv and 480 v schematic, wiring diagrams and three line diagrams. The
physical design and checking included electrical equipment arrangements, power distribution, raceway
system design, lighting, and instrument locations and DCS inputs for routing of cable. The construction
support included but not limited to the field modifications and redesign of underground distributions systems.
Provided supervision for the installation and testing of the site temporary power distributions centers and
field inspections of grounding connections, stub-up locations, preparation of field sketches, work scopes for
electrical and instrumentation demolition and re-installation.
Sr.Electrical Designer / Design Engineer at Merrimac Associates Inc. – Woodbury, NJ.
May 2006 - August 2007 (1 year 4 months)
Responsible for engineering, design and design supervision, engineering work packages, field support,
testing, project proposals, and electrical specifications for the power industry. The engineering work packages
include the design, installation and procurement of power distribution, raceway systems, lighting and
Page1
grounding.
Lead Electrical Designer at Washington Group Intl. – Princeton, NJ.
August 2005 - May 2006 (10 months)
Responsible for engineering design as well as checking for the Detroit Edison Monroe Generation Station
SCR Project. This design and checking included 15 kv, 5 kv and 480 v schematic, wiring diagrams and three
line diagrams. The physical design and checking included electrical equipment arrangements, power
distribution, raceway system design, lighting, and instrument locations and DCS inputs for routing of cable .
Electrical Designer / Design Engineer at PSE&G / Aerotek – Trenton, NJ.
September 2004 - July 2005 (11 months)
Responsible for electrical field verification, engineering work packages, field support and testing for the
Mercer Generating Station SCR Project. The verification included physical arrangements, single lines, motor
schematics, wiring and DCS interface. The engineering work packages and field support include the design
and installation of power distribution and raceway systems, lighting, grounding, heat trace and
instrumentation locations. The testing included medium and low voltage circuit phasing and equipment
circuit verification.
Lead Electrical Designer at Orbital Engineering Inc. - Bensalem, PA.
November 2000 - August 2003 (2 years 10 months)
Responsible for engineering design, field checkout and field support for the chemical, petrochemical and
pharmaceutical industry. This design included preparation of single line diagrams, motor and instrument
P.L.C. elementries and fire alarm systems. The physical design and checking included electrical equipment
arrangements, sub-stations, power distribution, underground, lighting, grounding, instrumentation wiring and
heat tracing systems. The field checkout and constructions assistance included retrofitting for power, and
lighting systems.
Lead Electrical Designer at Engineering Solutions Inc. - Exton, PA
June 2000 - November 2000 (6 months)
Responsible for engineering design and field checkout for the pharmaceutical and semi conductor industry.
This design included single line diagrams, fire alarms and gas suppression systems. The physical design and
checking included electrical equipment arrangements, power distribution, lighting, grounding and instrument
wiring. The field checkout and constructions assistance included retrofitting of clean rooms for power,
lighting and life safety systems.
Lead Electrical Designer at Contractor
February 2000 - May 2000 (4 months)
.Responsible for engineering design and checking for the power industry. This design included single line
diagrams, motor and instrument, P.L.C. control diagrams. The physical design and checking included
electrical equipment arrangements, power distribution, raceway system design, lighting, and instrument
locations and routing of cable from a PDS 3D model.
Lead Electrical Designer at Jacobs Engineering- Conshohocken, PA.
Page2
April 1997 - December 1999 (2 years 9 months)
Responsible for engineering design, field checkout, conceptual design, and cost estimates for pharmaceutical,
biotech and chemical industry. This design included preparation of single line diagrams; motor and
instrumentation P.L.C. control diagrams. The physical design and checking included power, lighting,
grounding, instrumentation wiring and underground conduit systems. The field checkout included surveys for
retrofitting of electrical systems and conceptual design estimates.
Principal Electrical Designer at Fluor Daniel / TRS. - Marlton, NJ.
August 1995 - April 1997 (1 year 9 months)
Responsible for engineering design, checking, vender package review, conceptual design cost estimates and
contractor interface for the power and pharmaceutical industry. This design included preparation of single
line diagrams, kks numbers and area classification drawings. The physical design and checking included
sub-station, power distribution, aerial distribution, underground conduit systems, lighting, instrumentation
wiring, fire alarms systems and project definitive cost estimates.
Lead Electrical Designer at Allstate Design and Development- Newark, DE.
July 1994 - August 1995 (1 year 2 months)
Responsible for engineering design, directing CAD personnel and checking for the chemical and
pharmaceutical industry. This design included preparation of single line diagrams, motor and instrument
P.L.C. elementries and fire alarm systems. The physical design and checking included power, lighting,
grounding, instrumentation wiring, heat tracing systems, and definitive cost estimates.
Elect.Design Supervisor at United Engineers / Catalytic Inc.- Philadelphia, Pa.
1978 - 1994 (16 years)
Responsible for engineering design, checking, directing CAD personnel, conceptual design estimates, field
checkout, and construction assistant for fossiel and power, chemical, and pharmaceutical industry. This
design included preparation of single line diagrams, motor and instrument P.L.C. elementries and fire alarm
systems. The physical design and checking included power, lighting, grounding, instrumentation wiring, heat
tracing, underground distribution systems, aerial distribution, sub-station layout, and project definitive cost
estimates. The field checkout included surveys for retrofitting of power and lighting systems, which included
MCC and panel power evaluation. The construction assistance included preparation of construction work
packages and review of field design and engineering changes.
Electrical Design Engineer at Joule Technical Corporation- Cornwell Heights, PA.
September 1977 - March 1978 (7 months)
Responsible for engineering design and drafting supervision for power distribution systems. This design
included single lines, elementries, power, lighting, and underground distribution systems. Also responsible
for lighting,heat trace and voltage drop calculations.
Regional Electrical Design Engineer at Atlantic and Pacific Tea Company- Valley Forge, PA.
October 1975 - September 1977 (2 years)
Responsible for supervising engineering design, checking, field checkout, preliminary cost estimates and
Page3
contractor estimate review. This design checking included preparation of single lines, elementries and
interconnection diagrams. The physical design and checking included power, lighting, grounding,
instrumentation, wiring, heat tracing, and underground distribution systems. The field checkout and
supervision included retrofitting for lighting and power systems, which included MCC and panel checkout.
Also responsible for lighting and voltage drop calculations.
Senior Electrical Designer at Catalytic Inc.- Philadelphia, PA.
August 1973 - June 1975 (1 year 11 months)
Electrical Designer at Day & Zimmerman Inc.- Philadelphia, PA.
January 1971 - August 1973 (2 years 8 months)
Skills & Expertise
Microstation
AutoCAD
Bentley Microstation
ETAP
CAD
Power Systems
Engineering
Power Distribution
Electrical Design
Electricians
Instrumentation
Engineering Design
DCS
Power Plants
Grounding
Project Engineering
Electrical Engineering
PLC
Lighting Design
EPC
Electricity
Construction
Power Generation
Calculations
Testing
PDS
Electric Power
Refinery
Substation
Wiring
Engineering Management
Petrochemical
Page4
P&ID
Transformer
SCADA
Short Circuit
High Voltage
Piping
Control Systems Design
Nuclear
Commissioning
Plant Design
Generators
Factory
Lightning Protection
Arc Flash
Gas Turbines
Low Voltage
Motors
Turbines
Education
Spring Garden College
Elect, Industrial Elect. Program, 1970 - 1975
Electrical Association of Philadelphia
Industrial and Commercial Power Distribution
Philadelphia Engineers Club
Page5
Stan Guzek
Stan Guzek
*********@***.***
Contact Stan on LinkedIn
Page6
Contact this candidate