Electrical Engineer
Resume:
Resume
Gary Van Antwerp
P.O. Box ******
Broken Arrow, OK 74014
Phone 918-***-****; 918-***-****
e-mail: **********@*****.***
Objective: To meet the electrical design or electrical construction needs
of your company
Engineering Experience:
01/06/2014-05/15/2014, TKS/TKI, Tessenderlo Kerley Services/International,
Carlsbad, N.M. Performed electrical design on petrochemical plants in Ponca
City, OK, NCRA, McPherson, KS, Chemical plant, Hanford, CA, CaTS plant,
Barrick, NV. Most effort has been on ammonia polysulfide plant next to
Conoco-Phillips refinery, Ponca City in replacing a transformer and adding
pumps, instrumentation and a new skid mounted reactor manufactured by TKS.
Specifications and request for quotations for the transformer,
instrumentation and pump motors were written. For the other projects,
single line diagrams were checked with necessary revisions to be made by
drafting, mainly for motor control centers. Vendor submittals were checked
carefully with suggested revisions for all projects. With all projects,
coordinated with vendors, wrote specifications, originated requisitions,
originated panel schedules, analyzed bids from vendors, performed ETAP
studies.
02/2012 to10/2013, Willbros Engineering, Tulsa, OK, Senior Electrical
Engineer. Performed electrical design for a CO2 compressor station at an
ammonia nitrogen plant associated with a petroleum refinery, consisting of
four 4000 HP compressors, two 1500 HP blower motors controlled by a VFD,
cooling tower pumps and fans at 4160 Volts, and smaller motors at 480
Volts. Used ETAP for electrical system study. Coordinated with the client
and contractor. Designed a substation for a 10 MVA, 69 KV/4160 V
transformer supplying large pump motors and a 500 KVA, 4160/480 Volt
transformer for small pump motors and control building power, for a
pipeline in Indiana. Wrote a specification for two 3000 HP 4160 Volt pump
motors at 4160 Volts, and smaller motors at 480 Volts. Coordinated with the
client and contractor. Designed a substation for a 10 MVA, 69 KV/4160 V
transformer supplying large pump motors and a 500 KVA, 4160/480 Volt
transformer for small pump motors and control building power. Wrote a
specification for two 3000 HP 4160 Volt pump motors for a ethanol pipeline
project near Beaumont, TX.. Specified a 50 kW backup generator for control
buildings and metering skids for a petroleum pipeline in Pennsylvania. Went
on a site visit to the Toledo,OH area for gathering information for an
expansion to Buckeye Pipeline for crude oil and distillate product with
large 4160 Volt main line pump motors and 480 Volt booster pump motors and
associated instrumentation.
p.2
6/2009 to 02/2012, G.L. Van Antwerp Engineering, Owner, Principal Engineer,
Electrical design of commercial and industrial buildings. Performed
electrical design for hotels, churches, and commercial buildings for
architects and other engineers..In 2010,
performed an electrical system study and a power factor improvement study
for a steel petroleum drilling pipe manufacture company in Muskogee, OK.
Wrote a conclusion about saving on billing and reducing power factor
penalty costs to the electric utility.
2/2009 to 6/2009, Electrical Consultants, Inc., Project Engineer. Wrote a
conceptual and feasibility report about improving operation and safety of
480 Volt generators for a petroleum facility in West Africa. Also,
included an estimate of engineering and construction costs.
6/2005 to 1/2009, President, G.L. Van Antwerp Engineering. Projects
included electrical design on commercial, industrial buildings, waste water
treatment project, Eureka Springs, AR. On contract, performed short
circuit and arc flash studies on the electrical
systems for natural gas terminals for Enogex, a division of OG& E, Oklahoma
City.
In 2008, worked as a consultant for a natural gas pipeline company
gathering data on all pipeline terminals, for deciding which terminal
electrical characteristics needed arc flash studies. Performed electrical
design on office building addition and new manufacturing facility for Zeeco
Co., burner/flare manufacturer, Broken Arrow, OK, 7/07 to 10/07. From 10/07
to 7/08, performed electrical design on office buildings and multistory
hotels. Also, performed electrical design on asphalt loading, Sapulpa, OK
and ethanol loading facilities, North Carolina, 4/2008-8/2008. Contract at
Baker Hughes, Sand Springs chemical plant updating one line diagrams and
circuit breaker panel schedules, 8/2008 to 11/2008.
7/2004 to 5/2005, Site Manager/Electrical Engineer, Readiness Management
System, Panama Beach, FL. Supervised six people and performed electrical
design at Al Udeid AFB, Doha, Qatar. Designed electrical systems for
buildings at 120/208 V., 60 Hz, 3 phase and 240/416V, 50 Hz., 3 phase.
Also, designed an underground 11 kV, 3 phase, 50 Hz. distribution system.
9/2001 to 6/2004, President, Electrical Engineer, G.L. Van Antwerp
Engineering, Electrical design on commercial and industrial buildings,
water treatment for architects and other engineers.
3/2001 to 9/2001, Domain Engineering, electrical design on natural gas
plants in Wyoming and Texas, including the design of a substation with a
rebuilt transformer.
p.3
6/2000 to 3/2001, Van Antwerp/Associates, electrical design of buildings
and Contract Electrical Design Engineer on 245 kV, cogenerating plant,
Louisiana, 1/2001-3/2001, Bibb & Associates, Lenexa, KS.
4/99 to 6/2000, Senior Electrical Design Engineer, MPW, Tulsa, electrical
design on Walmart, Walgreens, churches, and library projects.
1/99 to 3/99, Applications Engineer, Oklahoma State Univ., Worked with
state economic development to help new manufacturing companies expand and
assist with technical challenges, in the southern part of the state.
12/95 to 12/98, Van Antwerp/Associates, Performed electrical design on
commercial, industrial, and institutional buildings.
7/94 to 12/95, Electrical Design Engineer, electrical design for Walmart,
Sam's, buildings in Mexico, wrote electrical standards, BSW International A
& E Inc., Tulsa.
2/93 to 6/94, Contract Electrical Facilities Engineer, Johnson Controls, US
Army, Kwajalein Atoll. Coordinated with 4160 V. generator improvement.
Observed rewinding of generator stator. Submitted reports on improving the
main and backup 480 V. and 120/208 V., 3 phase generators on various
islands.
5/90 to 2/93, Van Antwerp/Associates Engineering, electrical design
including contract electrical engineering in Avionics, American Airlines,
Tulsa. Also, performed electrical design on commercial and industrial
buildings. Wrote operations and maintenance manual for hydroelectric
generators, Webbers Falls Lock and Dam.
11/88 to 4/90, Contract electrical engineering, McDonnell Douglas Aircraft,
Facilities, Tulsa, support for new stealth fighter aircraft, joint effort
with General Dynamics.
8/87 to 11/88, Van Antwerp/Associates Engineering Co., self employed,
performed electrical design for architects and other engineers, including
contract electrical design for Williams Brothers Engineering, Tulsa on
waste water treatment project, refinery.
8/86 to 8/87, Boeing Military Aircraft Division, Wichita, KS, Contract
Electrical Engineer, Avionics, Air Force One, President's aircraft.
Education: B.S. Electrical Engineering, Oklahoma State University
M.S. Electrical Engineering, University of Missouri
Registration: Professional Engineer, Oklahoma, Ohio, Arkansas, Texas
Contact this candidate