Electrical / Mechanical / Laser Engineer / Manager / Project Engineer

Leonard McCoy

*** ******* *****, ***********, ** 48836

517-***-**** H, 517-***-**** C, E-mail **********@*****.***

Controls Engineer, Electrical/Mechanical Engineer, Manufacturing Engineer

Seeking a position which will utilize my skills in automation, controls,

process, and manufacturing engineering; quality control; electrical,

mechanical, and maintenance engineering; customer service; team building

and leadership skills. I also

have over 12 years of management background with me: working with skilled

trades: non-skilled trades: union and non-union personal.

EXPERIENCE:

TRW Automotive, Fowlerville, Mi.

4-2013 To Present

Senior Automations Engineer

Duties:

Perform highly skilled corrective machinery/tool maintenance, troubleshooting

and repair for a variety of assembly and test equipment consisting of

electronics, machine controls, machine vision, electrical, pneumatics,

software, hardware and robotics systems

Develop, coordinate, track and perform preventative maintenance programs on

production equipment (i.e., cleaning, retooling, oil-changing, calibrating,

aligning, etc.)

Assist in process design improvement engineering studies involving product

throughput, first-run yields, ergonomics, tooling, equipment and

manufacturing processes

May liaise with outside vendors

Required:

. Manual dexterity

. Ability to use/operate hand tools and/or power tools, shop equipment

(lathe, mille, grinder, etc.)

. Interpersonal skills

. Ability to perform calculations with whole numbers quickly and accurately

without a calculator

. Read, understand and perceive relevant technical and non-technical material

. Technical aptitude and strong trouble shooting ability

. Analytical ability

. Computer and software literate

. Understanding and ability to apply TS16949 and ISO14001 standards

Preferred:

. Knowledge of PLC/SRC/RS LOGIX, Ladder Logic

. Knowledge of CNC Machining or manual machining

. Knowledge of robotic/vision systems

. Knowledge of process improvement, corrective maintenance, and preventive

maintenance

. Prior experience in a team-based management culture

Licenses/certificates:

. Applicable license.

The Woodbridge Group, Lansing, MI 11-2012 to 4-

2013

Process Engineer / Controls Engineer / Manufacturing Engineer / Group

Leader

. Daily requirements are to coordinate and prioritize the workload for

Maintenance Technicians on all shifts.

. Provide controls engineering services to site. Plan, budget, schedule

and coordinate capital projects.

. Provide working knowledge of Mechanical, Electrical, Pneumatic and

Hydraulic systems. As well as Allen-Bradley Control-Logix, PLC,

DeviceNet, Control Net, Ethernet and systems designed.

. Prior supervisory experience, combined with knowledge of employment

and health, safety and environment policies and legislation is

required in this position. A working knowledge of robotics, experience

with power distribution systems up to 480V with exposure to -

transformers, panel boards, and grounding systems was required.

. Support and follow all safety regulations (control of hazardous

energy, hot work permit, confined space, use of contractors,

preventative maintenance, water pollution, energy management, HSE

audit elements and others as assigned.

. Supervision of facility maintenance personal.

. Design plant improvements and implement preventative maintenance

program.

. Standardize procedures and engineering changes.

. Coordinate projects using internal and external resources.

. Implement process improvement.

. Responsible for employee morale in the Maintenance Department.

Contract Work 02-2012 to 10-

2012

Controls Engineer / Manufacturing Engineer / Skilled Trades Supervisor

. From: 7-2012 to 10-2012. Completed a contract position in Switzerland

for a major laser weld machining company. All requirements were met

within the contracted time and under budget and 3 weeks ahead of their

schedule. This equipment is utilized as production systems in welding

applications and production within the automotive industry. And send

to Mexico for a supplier to the automotive industry.

. From 2-2012 to 6-2012. GM Technical Center in Warren, MI working with

industrial HVAC, Chilling and air handling systems, as well as Mill

Wrights, Pipe Fitters, Carpenters and alike. Running their trades

department in the capacity of building maintenance, training, and

deployment of skilled trades personal as needed, for 1.2 Mil.

facilities space. These building were the Research and Development

building, and the Climatic Wind Tunnel, and the Aero Dynamic facility.

LPKF Laser and Electronics, Orion, MI 03-2011

to 08-2011

Senior Laser Engineer II (Closed Michigan Office)

. Work with engineering department and quality control on new and

existing product development all within the electrical, mechanical,

optical systems, medical and laser plastic weld industry.

. Diode pumped, CO-2 lasers, and High power Fiber lasers, chillers,

handler and automated systems And vision systems.

. Project management duties were required. Application engineering,

project management, root cause analysis on new and existing product

lines.

. Customer interface globally on customer support technical support,

product development, quality control, training and customer service

are required for this position.

. Work closely with the following departments, suppliers, purchasing,

manufacturing, quality control, testing departments and sales

personal.

. Install, calibrate, debug, service and repair of complex electrical

equipment and software also, install pipe lines for gas, water, air

and electrical connections.

. Work to isolate, repair problems in malfunctioning machinery.

. Train skilled trades and non-skilled trade's employees and management.

. Technical writing and updates to service manuals, drawings, SOP, and

safety procedures and training.

. Manufacturing and production support of Allen Bradley PLC, hydraulic,

pneumatic programmable logic controls.

. Responsibilities were to providing technical support to customers,

skilled trades, and engineering.

. Report design, reliability and maintenance problems to design

engineering department and /or software engineering department.

. Must exercises judgment within defined procedures and practices to

determine appropriate action. Work with CISCO, Citrix, TIS4, and

TCP/IP, ISO 9001, and CMMS, HMI

Netflix Inc., Lansing, MI 06-2009

to 03-2011

Operations Technical Manager / Automations Engineer / Manufacturing

Engineer (Position Moved to CA)

. Manager for the automations department.

. Also work closely with quality control department, purchasing,

manufacturing, electrical, and mechanical groups for 58 hub locations

throughout North America.

Project Manager. Manage the field service personal. Manage the budget for

the field service group, and automation department.

. Work with the engineering department on new and existing automation

equipment, VFD's, main control boards, compressors, and sorter and

conveyor systems, as well as working with vision systems.

. Train new engineers, field service, and maintenance personal.

. Lean and Six Sigma background required.

. Work with engineering group on new and existing automated equipment,

compressors, and conveyor system. Design layout and install of

electrical, air, gas, and water lines for systems.

. Manage budgets, and review cost saving measures, and implement these

procedures for both departments.

. Assist regional management, and individual hub managers with equipment

problems, maintenance procedures, and service calls. Schedule field

service personal to customer sites for service or training of

customers on laser systems.

. Implement safety procedures, and OSHA, and state, and federal

guidelines for safe working conditions within all facilities. Also

worked with CISCO, Citrix, TIS4, and TCP/IP, ISO 9001, and CMMS, HMI,

PC, PLC

Rofin-Baasel Inc., Boxborough, MA 06-2001

to 05-2009

Senior Field Service Engineer / Controls Engineer / Manufacturing Engineer

(Laid off)

. Requirements of this position were as follows. To work with

management, engineering, service, and quality control departments on

new and existing product development all within the electrical,

mechanical, optical, and vision systems. As well as project management

duties within the automotive, medical and laser industry for CO-2, Nd-

Yag, Diode, and Fiber lasers, chillers, handler and automated and

vision systems. Install communications interface for robotic systems

such as ABB, Motoman, Fanuc systems for customers such as TRW, Magna,

GM, Ford, Chrysler, Magna Corp. Noble Process Metals and alike. Lean

and Six Sigma experience required.

. Assist customers and engineering departments with welding

applications, such as fusion, spot, braze and tag welding techniques

and set up. Also full power calibrations.

. Quality control department specifications are met for specific welding

applications as well as laser applications. Also, root cause analysis

within an engineering, manufacturing, and applications environment.

. Install, calibrate, debug, service and repair of complex electrical

equipment and software. Design and install piping for electrical, gas,

air and water line connections.

. Work to isolate, repair problems on malfunctioning machinery, and

automation systems.

. Train skilled trades and non-skilled trade's employees and management.

. Excellent customer service, communication, and organizational skills

needed to supply technical support for the global market place for

such locations as Germany, Japan, UK, Canada, and Mexico and

throughout the US.

. Technical writing and updates to service manuals, drawings, SOP, and

safety procedures and training.

. Manufacturing and production support of Allen Bradley PLC, hydraulic,

pneumatic programmable logic controls.

. Also worked with CISCO, Citrix, TIS4, and TCP/IP, ISO 9001, and CMMS,

HMI

GSI Lumonics, Northville, MI 04-1996

to 06-2001

Senior Tech Support Engineer / Controls Engineer / Manufacturing Engineer

(Closed Michigan Office)

. Requirements were to work with engineering department, quality

control, service departments on new and existing product developments.

Project and process management was also required for global customers.

Install communications interface for robotic systems such as ABB,

Motoman, Fanuc. And vision and optical systems. For such customers

as, Magna, TRW, Chrysler, Ford, GM, Anhauser Busch. All within the

automotive, manufacturing, medical and commercial industries. A more

detailed daily responsibility of this position is listed below.

. Manager for customer support, and service department. Also, project

and process management.

. Work with engineering department on new and existing laser equipment

such as diode systems, Nd Yag, CO2, and fiber lasers along with the

chilling and automated handling systems.

. Provide weld applications support, power settings, calibration, and

parameters for different materials and applications such as metals

and, plastic materials. Design and layout of electrical, air, gas and

water lines.

. Assist customers and engineering departments with welding

applications, such as fusion, spot, braze and tag welding techniques

and set-ups and power calibrations of equipment.

. Work with PLC driven electrical, mechanical, and vision systems and

devices.

. Work with quality control department to insure high quality

specifications, and calibrations of equipment.

. Work with Daimler Chrysler, GM, Ford, Toyota, also with tier one and

two automotive suppliers.

. Excellent managerial, supervisor, communication, and organizational

skill were a must have.

. Technical writing techniques for manuals, drawings, and company

documentation's i.e. BOM's and technical updates, SOP, and safety

procedures, and CISCO, Citrix, and TCP/IP, ISO 9001, and CMMS, HMI.

. Electrical and mechanical assembly and testing and statistical

analysis.

. Support of Allen Bradley PLC, hydraulic, pneumatic programmable logic

control. Reports design, reliability and maintenance problems or bugs

to design engineering/software engineering. Commission and de-

commission of electrical and mechanical equipment.

EDUCATION:

Electrical and Mechanical Technology

The British & American University, New York City, NY

BACHELOR OF SCIENCE (BSEE) in Electrical Mechanical Engineering Technology,

3.9 GPA 06-1998

Area of studies include the following, Analog, and Digital devices, and

circuit, tech. writing, PC, and PCL, controls, advanced trouble shooting,

use of tech. testing equipment. Also includes DVM'S, 'O' scope, H.V.

Probes. Also assist with design and lay-out and Project Mgt, Technical

writing, mechanical and electrical drawings. Root cause analysis,

solutions, etc.

Electronics Technology

National Education Center, US-Livonia, MI

ASSOCIATE Degree EET GPA 3.7

Electrical engineering technology, studies to include, but not limited to,

analog, and digital circuitry, semi-conductors, micro processing, tech.

writing, electronics 1&2 Electrical / Mechanical Repairs and

Troubleshooting.

Computer Processing

Hallmark Computer School, US-Pontiac, MI

Certificate: Micro Computer Processing 1 & 2, GPA 4.0

Micro Computer Processing technology.

Skills:

Use of Electrical / Mechanical Test Equipment, Pneumatics, Hydraulics, PC,

PLC, CAD,

Use of Excel, Word, Power Point, AIMS, Visibility, Oracle, Panel View,

Laser CAD, Visual Laser

Mark, RS Links, Control Logix, also worked with CISCO, Citrix, TIS4, and

TCP/IP, ISO 9001, and CMMS

Use of hand tools, and power tools "o" scope, DVM, HV Test Probe, Micro

scope, calipers, watt meters, laser and optics alignment tools, power

meters, pucks, spectrum analyzers and such testing tools. Lean and Six

Sigma background.

ADDITIONAL INFORMATION:

At the last 2 schools attended, was on the dean's list, and perfect

attendance awards, Honorable Mention from the United Way. Also, a

professional trainer for the last 3 companies. Training both union and non-

union personal, skilled trade and non-skilled trade's personnel. Willing to

take on special projects such as.

. Electrical/electronic assembly and testing and statistical analysis

. Welding applications, parameter power settings, set ups of fusion and

tag weld applications and procedures.

. Statistical process control knowledge.

. Tech writing procedures/methods

. Manufacturing support and engineering.

. Management, both office and field personal

. Professional Trainer for employees, and customer sites. With Laser

Systems, Electrical, Mechanical, and Automation Systems. As well Lock-

out Tag-out trainer, and LSO Laser Safety Officer Trainer.

Contact this candidate