Medical Quality Control
Resume:
ANANTHAKRISHNAN ANIL BABU
*******.********@****.***.***
Ph: 817-***-****
www.linkedin.com/pub/ananthakrishnan-anil-babu/78/615/848/
OBJECTIVE
To obtain an Intership in Biomedical/Electrical engineering especially in Medical Instrumentation, Medical
Device Mechanical Design Drawing and Development – Hardware and Software, Quality Control and Analysis,
starting May 2014 where I can create/test/modify medical devices which is inclusive of Research and
Development, Quality, Regulatory, Manufacturing and Marketing departments.
EDUCATION
Master of Science, Biomedical Engineering, (Jan 2013- Dec 2014)
University Of Texas At Arlington, TX - (Current GPA - 4.0)
UT Southwestern Medical School, Dallas,TX
Bachelor of Technology, Electronics & Biomedical Engineering, May 2010
Cochin University Of Science And Technology, Cohin, India (CGPA – 8.1/10)
RELEVANT COURSES
•
• Medical Instrumentation –Bio Sensors and Transducers, Medical Devices -Designing and Development
(H/w amd S/w Development), Biomaterials,Biomechanics,Proteomics, Cell Biology, Immunology and
Human Physiology and Anatomy.
• Embedded Systems and Microcontrollers, Digital SignalProcessing, Analog and Digital Electronics.
• Fluoresence Microscopy, Tissue Optics, Medical Image Processing.
• Bio Statistics – Programming and Bio informatics,Quality Control,Medical Regulatory affairs.
PROFESSIONAL SUMMARY
• More than 19 months of experience in Medical Device Development & Design, Service and
Maintenance.
• Good Designing, Problem solving and Debugging Skills.
• Proficient in SOLID WORKS, MATLAB,LABView,SAS,SQL,C,C++,Mplab Programming.
• Internship experience (10 Months) in Embedded C/C++ Development and Testing.
• Exposure towards Installation/Customization of medical devices like Infusion Pumps, Syringe pumps,
Ventilators, HFOV, Endoscopes, CPAP,BIPAP, Analgesia Machine etc
• Worked on products of leading bio medical companies like Care fusion, Stryker, Abbott, Spacelab’s
Health care and PICIS.
• Experience in medical devices handling, repair, maintenance, FDA procedures and regulations, 510K
process, QSR, 21 CFR Parts 11, 820,IQ, OQ, PQ protocols for Quality Assuarance.
• Basic understanding of DNA sequencing and PCR, Good lab practices, and general familiarity with
basic lab techniques such as pipetting.
• Hands on Experience in Applied Biosystems PCR-9600, Real time PCR, DNA Sequencers, Genetic
Analyzers etc.
• Worked on the Up-gradation of Spacelab’s Patient Monitors, PICIS Care Suite Clinical ICU Automation
Project and Gas Delivery Engine Module Replacement Procedures for Care fusion Avea Ventilators.
PERSONAL SKILLS
• A quick learner and a good team player.
• Professional in approach, organized and result oriented.
• Flexible: Manageable, adaptable and versatile.
• Highly motivated, dynamic candidate capable of contributing both technical and Leadership skills
TECHNICALSKILLS
PROGRAMMING LANGUAGES: C, C++, Assembly (89C51, 8051, PIC), SQL, Embedded C/C+
+,8085Microcontroller, 8086 MASM.
DEVELOPMENT TOOLS:ANSYS, Matlab, SolidWorks,Lab view, Mplab,SAS, Mathematica, MS Office.
OPERATING SYSTEMS:MS DOS, Windows X, Linux, Mac.
WORK EXPERIENCES (1.5 years of professional experience and 10 months internship experience)
Alessa Medical & Scientific Equipment Co.Wll,Safat, Kuwait (March 2011–Nov 2012)
Profile :Biomedical Products and Service Engineer : Technical Support -http://www.alessakuwait.com/
• Responsibilities and Projects :
o Installation, Customization,Testing, Field Service, Maintenance & Calibration of Medical and
Scientific Equipment manufactured by leading companies like Carefusion(USA), CardinalHealth
(USA), Spacelabs Healthcare(USA), Mortara(USA), Pentax(Japan), Picis(USA), Philips
Respironics(USA), Stryker(USA), Abbot(USA),Eschmann,(Germany) and Applied
Biosystems(Germany) .
o The equipment handled are: Infusion Pumps, Syringe pumps, Ventilators, HFOV, Endoscopes,
CPAP,BIPAP, Analgesia Machine, ECG machine, Patient Monitors, Defibrillators, Incubators,
OT Table, Foetal Doppler, Apnoea Monitors, Medstations, Cerebral Function Monitors, PCR,Real Time PCR and Genetic Analyzers.
• Gas Delivery Engine Module Replacement for CarefusionAvea Ventilators ( AUG 2012)
o GD Engines for Avea Ventilators where Replaced and the upgraded board was
installed.
o The ventilators where later calibrated and tested with test lungs.
• PICIS Care Suite Clinical ICU Automation (FEB 2012)
o Installation of the PICIS care suite clinical automation software for ICU in Sabah
Surgical Hospital, Kuwait. Network configuration and testing of the same. All the medical
devices in the ICU where successfully interfaced to the software.
• SpaceLabs Patient Monitor Upgrades ( NOV 2011)
o Upgraded the software (CO2 Module) and Hardware (Circuit modifications) for Patient
Monitors.
Project Intern at Kalki Communication Technologies, Kochi India (June 2010– Mar2011)
Profile :Embedded Telecommunications C /C++ Development and Testing.
• Part of the Generic Protocol Converter (GPC) development team.
• Familiarized with many protocols like MODBUS,IEC1,SPA,DNP 3.0.IEC 61850 etc.
• Developed and Tested GPC’s :
o to convert data from one protocol to another, from multiple protocol to one, one to many and
from many to many which involves analog/digital data and commands.
o Converting fast transferring events on one/more protocol to be sent as command on other
protocol (s) [Master-to-Master-Mapping].
o Commands on one protocol to be transferred as events on the other protocol(s). [Slave-to-Slave-
Mapping].
A CADEMIC PROJECTS
EEG Controlled Robot (Spring 2010 - CUSAT)
o Designed and successfully implemented an EEG controlled robot that moves according to the hand
movements of the user.
o Signal processing and classification was implemented in MATLAB software using Principal
Component Analysis Algorithm and Artificial Neural Networks.
Tissue Optical Attenuation Coefficient Measurement (Spring 2013- UT ARLINGTON)
o Measured the optical attenuation coefficient of tissue, by implementing a system that transmits light
from fiber bundle into the tissue-like phantom which is a mixture of milk and water.
o Aquired the signal output from photoetector and used Matlab for processing the signal and obtained
the attenuation coefficient. Thus the optical and Physiological properties of the tissue was studied.
ECG Machine : (Fall 2013- UT Arlington)
o Designed and developed an ECG Machine that displays the ECG of the user. Matlab was used for
signal processing and conditioning.
Implantable Oxygen Sensing and Generator for Hypoxia (Summer 2013-UT Arlington)
o Designed a bio compatible implantable oxygen sensor and generator device,that monitors tissue
oxygen concentration and generates oxygen through electrolysis of water and thereby proposed an
efficient and simple solution for tissue hypoxia
Brain Wave Machine with Recording (Fall 2009 - CUSAT)
o Designed and implemented a brain wave machine which could stimulate the brain waves, generate
evoked potential and hence drive the user to any required mental state, like Relaxation, Sleep etc.
o Programmed a PIC to control the timing of usage of the machine and developed a small scale EEG
machine to record the responses.
TRAINING AND CERTIFICATIONS
• Hands-on Training: Completed training on basic and Care Suite Clinical Core Training program on
Hospital Automation by PicisCompany (USA) (July 2011)
• Product Training:Attended and successfully completed Product training on Gemini Infusion
Pumps,Alaris Syringe pumps, Vela and Avea Patient Ventilator systems from Carefusion(USA).( Sep
2011).
Contact this candidate