programmer of c++, microprocessor & microcontroller
Resume:
Vinod Kumar Sharma B.Sc., M.Sc. M.Tech., AMIE (Electronics & Communication)
Residence: 201, Bal Mukund Khand, Giri Nagar, Kalka Ji, New Delhi-110019
Email id- ******************@*****.*** Mobile: 098********
I offer my candidature for entry level positions in Assembly Language Programming of Intel
Microprocessors (8-bits, 16-bits, 32-bits and 64-bits) and Microcontrollers (8-bits Intel-8051, 16
and 32 bits Atmel’s AVR and ATMEGA-16 &32 bits) along with their all peripherals, interfaces,
buffers, timers and General-Purpose Programmable Peripheral Devices. I am well conversant
with their Architecture and Programming. I bear a strong programming skills in C and C++
Language and their intermixing in Assembly Language Programming in above-said
Microprocessors and Microcontrollers. I also have very good knowledge of programming in
VERILOG, SYSTEM VERILOG, System C and Specman E.
Technical Expertise:-
1) Full command over making & running of programs in C & C++ Languages including
graphics.
2) Highly skilled in Assembly Language Programming of Intel’s 8-bits,16-bits,32-bits and
64-bits Microprocessors viz. 8085 A, 8088, 8086, 80186, 80286, 80386, 80486, Pentium,
Pentium Pro, Pentium-4 and Core-2. Strong knowledge of their Architecture and
Programming.
3) Well conversant with the following supportive devices:
Octal buffer 74LS244; Octal bus transceiver 74LS245; Tri-state buffer 74LS240; 3 to 8
Decoder 74LS138; 2-to-4 Decoder 74LS139; Encoder 74LS148; 7475 D flip-flop;
74LS373 D Latch; 74LS32 Quadruple two input OR gates; Tri-state buffer 74LS366;
74121 Monostable Multivibrator; DMA Controller 8257; 8-bit D/A Convertor 1408; 10-
bit DAC (AD7522); Analog Digital Convertor AD570; AD558; AD542; National
semiconductor ADC0801; Multipurpose Programmable Device 8155; 3-to-8-Decoder
8205; HP 5082/7340; Fairchild Hexdecoder 9370; Common Anode seven-segment
display; 8279 Programmable Display Interface; 8255A Programmable Peripheral
1
Interface; Opto-isolator MOC 3011; Invertor 7404; 8253 &8254 Programmable Interval
Timer; 8259A Programmable Interrupt Controller; 8237A DMA Controller; RS-232C
Signals and voltage level; 8251A USART Programmable Communication Interface; SN
75491-Segment Divider; SN 75492- Segment Driver; Keyboard Encoder MM74C923;
Clock Generator 8284A; Bus controller 8288; TMS 4016 (SRAM); EPROM 2716; TMS
4464 (DRAM); 62256 SRAM; DRAM 41256;
30-pin &72-pin SIMM; 168-pin DIMM; 74 HCT139; PAL 16L8; EPROM 27256; Flash
Memory Device 28F400; Error correcting circuit 74LS636; Decoder GAL22V10; Buffer
74ALS244; Octal Latch 74ALS374; Connectors centronics 36-pin and DB25-pin; GAL
22LV10C/LCC; 82C55 peripheral interface adapter (ppi); DMC-20481; Programmable
Interval Timer 8254; Programmable Communication Interface 16550 UART; DAC0830;
ADC0804; 82C55 PIA; 8259A PIC; 8237 DMA Controller;
4) Highly skilled in Architecture and Assembly Language Programming of Microcontrollers
(8-bit Intel’s 8051, Atmel’s AVR RISC Microcontroller series; 16 and 32-bits Atmel
ATmega; 32-bit ARM Cortex M3 ).
5) Well conversant with the supportive Interface devices of above said microcontrollers:
AT90S1200; 16 pin micro manager chip DS1236; 3-pin reset generator DS1233;
MAX232 level translator chip; 74165 Serial-in to cascade multiple shift registers;
CD4094; PCF8574 I/O expander IC; AT90S2313; Temperature sensor LS335; 12-bit 8-
channel serial ADC MAX186; MAX110/111, 14-bit dual channel ADC; MAX521 DAC;
ULN2003A darlington array driver IC; Stepper motor interface L297/298/L2603;
DS1302 Real Time Clock (RTC); Finite State Machine (FSM);
RS232/RS422/RS423/RS485 Communication Link ; Serial Peripheral Interface (SPI);
IIC or I2C bus; Industry Standard Adapter (ISA) bus; Infrared Data Association (IrDA)
Data Link; USBN9602; MAX3100 UART; Controller Area Network (CAN) bus; 78L05
Voltage regulator;
6) Highly skilled in making programs in VERILOG :
Designing at Switch Level; designing at Gate Level & RTL.
2
Timing & Delays
User-Defined Primitives (UDP)
Programming Level Interface (PLI)
Logic Synthesis with Verilog HDL
Advanced Verification Techniques
7) Good skills in making programs in SYSTEM VERILOG :
Verification
Constructs
Interface
OOPS
Randomization
Functional Coverage
Assertion
UVM
VMM
OVM
AVM Switch TB
Good skills in making programs in OPEN VERA:
8)
Constructs
Switch TB
RVM Switch TB
3
9) Good skills in making programs in Specman E
10) Good skills in making programs in System C
11) Fundamentals of CMOS Circuit Design
12) Very strong command over the fundamentals of Digital Electronics :
Clocks & Timing Circuits
Flip-Flops
Registers
Counters
Sequential Circuits- Synchronous & Asynchronous
D/A and A/D Conversions
Memory
Boolean Algebra
13) Strong command over fundamentals of Analog Electronics.
Working Experience:
1) Working with Infonet Care Enterprises; Okhla Industrial Area Phase-I, New Delhi-
110020 since 03rd January, 2011 till date as an engineer. Working in R&D Department
for Circuit Designing & Trouble Shooting. Company deals in Modulator, Amplifier,
Splitter, Digital Receiver, Stabilizer, Booster, SMPS, Transmitter & Nodes. My job is
designing the circuit according to the requirement.
2) Worked with Omaxe Construction Limited as Manager- Head: Training &
Development. There I worked from 10 April, 2005 till 31 Dec, 2010. During this span of
5-years working department developed more than 450 in all including Engineers, Store-
Incharges, Foreman & Supervisors and inducted in the company. The training span was
4
from 6-months to 1-year depending upon the cadre. Company is a renowned name of
North India in the field of Real Estate
3) Worked as Assistant Manger –Operations in World Index Investment Limited: A
Multinational Hong-Kong based company from August-1996 till March, 2005. There my
job was testing, developing & validating the tools and software used in industry.
Educational Qualification:
1) AMIE: A-Level has been cleared by qualifying 10-Papers. Registered in Level –B
(Electronics & Communication)
2) M.Tech. : Systems Management & Planning from DAVV Indore-1996. First Division
with Distinction.
3) M.Sc. : CHEMISTRY (MATERIALS), First Division -1992
4) B.Sc. : Physics, Chemistry & Mathematics-1990
5) XIIth Class : Physics, Chemistry, Mathematics & English. First Division -1987
6) Xth Class : English, Mathematics, Science, Social Studies & Hindi. First Division- 1984.
Current salary: INR 400,000 pa
Expected salary: As per present industry standards.
Notice period: Minimum 15 days
Marital status: Married
5
Above furnished information is correct to the best of my knowledge.
Date: 24-02-2014 (Vinod Kumar Sharma)
6
Contact this candidate