Engineer Manager
Resume:
H UBERTUS BONAR SAUT M ARUL I
Perumahan Puri Fajar. Jalan Fajar Timur 2 No.15 RT.8 RW.9 Cibeber. Cimahi 40531. Jawa Barat. INDONESIA
+62-813******** (mobile phone) ; +62-22-667**** (home)
Email: ********@*****.***
Career Objective:
To be an Manufacturing Engineer /CADCAM Engineer in manufacturing where I can prove my skills to help the organization
grow in every probable way.
Skills and Competency:
• 21 years of experience in CADCAM Programming
• Expert in utilizing APT-AC 370,Sinumeric,Fanuc,Catia,M asterCAM,M azatrol/M atrixCAM, M ori-APL and EdgeCAM
which are used for NC part/tool programming .
• AUTOCAD
• Engineering,Procurement & Construction by REKIN-Indonesia
• Ms Office application and MS Project Planner
• Quality M anagement System ISO 9001-2000
• I mprove NC part programs
• First Article Inpsection and dimension
• CATIA Design & Manufacturing
• SAP Systems
• A dedicated team player
Educational Qualification:
• Bachelor of Mechanical Engineering from Universitas Jenderal Achmad Yani, Bandung-Indonesia, 1999
• Diploma of Politeknik Universitas Sriwijaya, Sumatera Selatan-Indonesia, 1987
Professional Experience:
Post : M anufacturing & Technical Support Engineer
Organization : PT.Useng Teknologi Utama. Batam Centre. Batam-Indonesia
Duration : September 19, 2013 – Present
Roles and Responsibilities:
• Review order part oil field from customer (Material, Process Plan, Machine, CNC Program, Tool & Fixture)
• Create process plan for FAI part
• Planning schedule part machining
• Record and improvement cycle time
• Create cnc program
• Backup and maintain cnc data program
• Root cause analysis for failure part
Post : M anufacturing Engineer I I
Organization : PT.Cameron Systems -Surface Systems. Batu Ampar. Batam-Indonesia
Duration : April 15, 2013 – July 12, 2013
Roles and Responsibilities:
• Execute BOM,drawings/ blue prints and producing programs for processing parts as per the customer specifications
using SAP Systems
• Developing and create programs type of part Wellhead System for turning machine.
• Working with manufacturing engineers, tool engineers and quality engineers
• Determines reference points and direction of machine cutting paths using Edgecam
• Computes angular and linear dimensions,radius,and curve,and lines sequence of operations required to machine part.
• Create tools and have knowledge in CADCAM application technique such as tool pathing, positioning, tool assignment
• As an engineer to support manufactur (Shop floor)
• Prepare setup sheets, describe operations & specify required tools
• Make calculations for dimensions, tool offsets, rpm, speeds & feeds
• Create and write program M,G-Code and Tolerance in dimension for turning machine
• Prepare documents and write complete sequence machine operations necessary complete cycle.
• Registry cnc part program using PROGNO Systems
• Fanuc program : Doosan Puma 700M & Puma 800, Mazak SLANT 650, Turning Vertical TUD
• Back up and maintain machine code data
• To improve cycle time cnc part program, solve NCR parts and continuous improvement of process.
• Create work instructions information to accurately reflect the processes to be used in manufacturing the parts.
• Assure program meets target cycle time and program generate geometry to customer requirements.
Post : N C Programmer
Organization : U TC Aerospace Systems (PT.GOODRICH PINDAD-Aeronautical Systems Indonesia), Bandung-
Indonesia
Duration : M arch 2006 – April 17, 2013
Roles and Responsibilities:
• Receiving drawings, blue prints, process plan, fixture/gauge and producing programs for processing parts as per the customer
specifications
• Developing programs for fixing requirements for different machine components
• Working with manufacturing engineers, tool engineers and quality engineers
• Determines reference points and direction of machine cutting paths
• Computes angular and linear dimensions,radius,and curve,and lines sequence of operations required to machine part.
• Create tools and have knowledge in CADCAM application technique such as tool pathing, positioning, tool assignment
• As an engineer to support manufactur (Shop floor)
• Prepare setup sheets, describe operations & specify required tools
• Make calculations for dimensions, tool offsets, rpm, speeds & feeds
• Create and write program M,G-Code and Tolerance in dimension for turning and milling machine
• Mazak program : Mazatrol 640T,QTN100M/100MS/150/200M/200MY/200IIMY/250II,FJV-250,HCN4000-II,Integrex-
300IV
• Fanuc program : Small CIncom F12, Large Cincom E32,Dainichi,Tsugami BS12/20C-V, Tsugami G18,Haas ST20SS &
ST30SS, Haas EC400, Hartford VM/HM, Moriseiki MH40,Okamoto OGM250,Studer S40-Lambert.
• Simulate machine code data/programming on machine
• Interpretate drawings to develop process plan and sequence machining part
• Back up and maintain machine code data
• Create drawing ballon for first article inspection (FAI)
• To improve cycle time cnc program
• Supervise machine operators
Post : M anufacturing Engineer
Organization : CV.MEUT IA M AND IR I, Bandung-Indonesia
Duration : September 2004 – March 2006
Roles and Responsibilities:
• Interpretate production drawing and re-design / drawing part
• Arrange production process plan and machining process requirement
• Calculate cost and time, schedule plan for production part
Post : N C Programmer (Work 2 Shift )
Organization : I ndonesian Aerospace Industry /IAe (PT.IPTN), Bandung-Indonesia
Duration : January 01, 1988 – February 2004
Roles and Responsibilities:
• Create and write M,G-Code and Tolerance in dimension for milling machine
• Create fanuc program for Yoneda 800, Yoneda 1225, Toshiba Machining Center, Millac 4H, Millac 6H, Cincinnati Millacron
DG-MP,Mazak H400, Oerlikon, Okuma & Howa,
• Create and transfer cnc program/machine code data using workstation server
• Select cutting tool
• Debugged by Post Processor (for APT-AC 370 programming)
• Reviewing three-dimensional computer-aided/automated design (CAD) blueprints, determining where to cut, and other
calculations
• Control & verify cnc programming using vericut
• Create operator’s numerical control document
• Create drawing ballon for first article inspection (FAI)
• Interpretate drawings to develop process plan and sequence machining part
• Expand and debug latest CNC programs, modify and improved existing CNC programs for every types of CNC machines.
• Evaluates computer printout or encoded tape through original program sheet to assure correctness of machine orders.
Aircraft component:
• Cover Antena – BO105 Helicopter
• Wing Skin Panel – lower, fitting part and other part of CN235 Aircraft
• Part of B737 (sub-contract)
• Doubler & Trippler part - Mitsubishi Japan (sub-contract)
• Engine Mounting – Titanium and Steel part of N250 Aircraft
• Component of Fokker100 (Sub-contract)
• Wing box specimen of N2130 Aircraft
References:
• Name : Rajaumbang SARAGIH
Post : Manager Management Human Resources. Div.Technologie and Development
Organization : Indonesia Aerospace Industry/IAe (PT. Dirgantara Indonesia)
Phone No : +62-22-605**** (Office)
E Mail ID : ********@**********-*********.***
• Name : Bambang Sugiyarso
Post : Exs. Director of PT.Goodrich Pindad-Aeronautical Systems Indonesia (2006 – 2009)
Organization :-
Phone No : +62-811****** (Mobile phone)
E Mail ID : **********@*****.***
• Name : Ria Juliarti
Post : Human Resource Manager
Organization : P.T. Cameron Systems - Surface Systems.Batu Ampar-Batam.Indonesia
Phone No : +62-778-****** Ext.136 (Office), +62-819******** (Mobile phone)
E Mail ID : R **.********@*-*-*.***
• Name : Yofy Salim
Post : Manufacturing Manager
Organization : P.T. Cameron Systems - Surface Systems. Batu Ampar-Batam.Indonesia
Phone No : +62-778-****** Ext.114 (Office), +62 812.1081159 (Mobile phone)
E Mail ID : ****.*****@*-*-*.***
Contact this candidate