Engineer Electrical

DANIEL A. NORTON

**** ****** ** *******, ** ***** 214-***-****

*************@*******.***

ENGINEERING:

Program Director- Program Manager- Project Lead Engineer- Systems-

Subsystems- Avionics- Electrical- Interiors- Lighting- Integration-

Design- Systems Certification- Environmental Test- Product

Development and Liaison Manufacturing

DEGREE:

BS/EE Degree Harrington University, JUN-10-1988

CERTIFICATIONS:

FCC LICENSE # PG-GB-053717 Commercial with Radar (Elements 1, 3, and

8)

(ITAR) International Traffic in Arms Regulations

ISO 9000 / 9001 / 9002 / 14000

ESD and ESDS Bombardier Learjet Wichita, KS

Electrical Safety (AC) Rockwell Collins Jun 27, 2006

Integration, Verification, Validation Rockwell Collins Jun, 2006

ETCP: Systems (SI) Rockwell Collins Jun 05, 2006

Lean Value Stream Mapping & Analysis (AC) Rockwell Collins May 15,

2006

Quality (QMS) RC Structure (CentraOne) (Recorded) Rockwell Collins

May 15, 2006

Fire Protection / Fire Extinguishers Rockwell Collins Jun 28, 2006

Requirements Capture (SI) (Decomposed and derived) Rockwell Collins

Jun 27, 2006

AVAILABILITY:

Immediate, with U.S. Passport (U.S. Citizen)

SUMMARY/ACRONYMS:

Over 20 years of experience in avionics, electrical, design,

systems, subsystems, integration, systems certification,

verification, validation and Integration between customers, vendors

and engineering. Systems design of airborne electronics (AE),

avionics, electrical installations, modification, integration,

documentation, certification, test, retrofitting, and changeovers.

Fuel systems bleed air systems, cabin pressure systems, pneudraulic.

Design, installation and modification of aircraft flight manual

supplements (AFMS), Auxiliary power unit (APU), Bill of materials

(BOM'S), Cordless cabin telephone system (CCTS), Electrical load

analysis (ELA), Engineering orders (EO), Enhanced ground proximity

Warning system (EGPWS) Hook-up lists (HUL), Instructions for

continued airworthiness (ICA), Maintenance manual (MM), Parts list

(PL), Reduced vertical separation minimum (RVSM), Satellite

communications (SatCom), Service bulletins (SB), Supplemental type

certificate (STC), Type Certificate (TC), Wiring Diagram Manuals

(WDM), Wiring and/or Cable Harness Design and fabrication of

drawings/diagrams and PL (WHD/PL). Some experience with Preliminary

system safety assessment (PSSA), Systems safety assessments (SSA),

Failure mode effects and analysis (FMEA), Functional hazard analysis

(FHA), Common mode analysis (CMA), Fault tree analysis (FTA).

REGULATORY AGENCIES:

FAA; FCC; EASA (JAA); TCCA; RHBA; CAAC (China)

REGULATORY DOCUMENTS AND STANDARDS: The following list is part of what I have

worked with

FAA: 8130-9's ABD: 100

AC: 25-19 IEEE: 488.1, 488.2, 802.3, 802.11

DEF STAN: 00-55, 00-56 DOT, FAA, RD: 93, 5.

FAR, JAR, CAR, and RHBA: 15, ARINC: 400, 500, 600, 700 Standards and other

21, 23, 25, 27, 29, 91, 121, industry standard documents

125, 135, and 145

INMARSAT MIL B: 5087

MIL E: 6051 MIL SPECS; DOD-HDBK: 763

MIL HDBK: 217, 454, 235, 237, RTCA/DO: 154, 160, 178, 254

241, 253

NATO MAS STANAG: 3516, 3614, MIL STDS: 100, 180, 285, 454, 461, 462, 480, 481,

3632, 3347, 3659, 3660, 7073 704, 810, 975, 1275, 1553, 1629, 195000, 38534.

SAE ARP: 4754, 4761 USAF: Technical Orders (TO), Technical change

technical orders (TCTO)

And more

DANIEL A. NORTON

1802 Legend DR Garland, TX 75040 214-***-****

*************@*******.***

KEY TECHNICAL SKILLS:

AutoCAD, HELIX, CATIA-CADAM Drafting (CCD), MS Office, Word,

Excel, MS Works, Word Perfect.

SYSTEMS WORKED:

Communication:

HF, UHF, UHF/DF, VHF/FM, HF, ICS, SINCGARS, KHF-950, UNS-1C,

CMU, SATCOM, AERO-M, AERO-H, AERO-I, INMARSAT, AORE, AORW,

POR, IOR, AirCell Axxess/Iridium, ACARS, IFF, CWLAN, (AMPS,

NAMPS), digital (CDMA, TDMA, GSM), (CCTS)

Navigation:

VOR, WAAS, GPS, GPWS, EGPWS, Glide slope, DME, ILS, Microwave

landing systems (MLS), GPS landing system (GLS), ATC, TCAS,

Skywatch, Stormscope, Navigator RCVR-XMTR, TACAN, Doppler,

Weather radar (WXR), APS-145 Radar, INS/IRS, Northstar CT-

1000, Radar and Barometric altimeters, Attitude, Airspeed, Air

data attitude heading reference system (ADAHRS).

Environmental:

ECS, Heating and ventilating, Fire detection and extinguishing

Flight Control:

FMC, FMS, FADEC, AOA, FDR, Automatic flight control system

(AFCS), Autopilot.

Indication Systems:

TORQUE, INLET Temperature, Oil pressure, temperature and Pitot-

Static, Measured gas temperature, Hydraulic temperature &

Pressure, Master caution warning.

Fuel Systems:

FMS, Quantity, Boost, Flow, Auxiliary, Probes, Float switches,

Interconnect valves.

Weapons and Armament:

Armament control's, ECM, ECCM, ECCCM, Heads-up display,

Systems, FWD/AFT searching radar, IR, Night targeting systems,

FLIR, Wing jettison racks, Acoustic sensor sys (BUOY).

Passenger Entertainment Systems:

IFE, Cabin entertainment systems, CWLAN, LIVE-TV, AUDIO, CMS,

XM radio, Venue cockpit and cabin management system and the

AirCell Axxess/Iridium system

Lighting:

Flight Deck, Interior and Exterior lighting

Electronic Flight Instrument System (EFIS):

Engine fuel data system (EFDS), Air data system (ADS), (MADS),

(DADS), Attitude heading reference system (AHRS), Electronic

information caution and advisory system (EICAS), Power

control system (PCS), Fuel probe interface system (FPIS),

Autopilot interface system (APIS),

Power Generation and Distribution Systems:

Auxiliary power units (APU) 400 Hz 90 kVA at 400 cycles with

generators up to 225 kVA, subsystems, power distribution

AC/DC current switching systems and anything electrical

And Other Systems

DANIEL A. NORTON

1802 Legend DR Garland, TX 75040 214-***-****

*************@*******.***

PROFESSIONAL EXPERIENCE:

Most of my jobs have been as a Contract Hire, Contracts had been completed

02 / 13 - Press Off work;

Family illnesses and deaths

11 / 12 - 01 / 13 Hawker Beechcraft Corporation (AKA Raytheon

Aircraft); Wichita, KS (Contract Hire - Contract Completed)

duties same as 11 / 07 - 01 / 09

12 / 11 - 10 / 12 Luminator Technology Group; Plano, TX

Aircraft Certification Engineer

747, 787

System certification and qualification testing Writing 8130-

9's, test procedures, documentation and Performing aircraft

Systems Certification and Qualification testing per DO-160, DO-

210, DO-178 and DO-254 qualification tests, Verification &

Validation (V&V) for certification by FAA and foreign

governmental agencies

04 / 11 - 08 / 11 Rockwell Collins; Melbourne, FL (Bentley Global

Resources. Contract Hire - Contract Completed)

Systems Certification and Qualification Test Engineer

A350, 787

Writing test procedures and other documentation. Performing

aircraft Systems Certification and Qualification testing per

DO-160, DO-210, DO-178 and DO-254 Environmental and EMI/EMC

qualification tests, HW / SW Verification & Validation (V&V)

for Satellite Radio and Data communications (SATCOM) systems

for TSO, FCC, and INMARSAT Certification Duties include: Test

and evaluation of aircraft equipment, Creation /review / edit

of test procedures and documentation, Conformity Inspection

and Compliance, performance and/or witnessing of certification

tests of UUT and equipment set-up and Operational checks,

authoring problem reports, failure analysis, and Test Results

Reports, etc. Create / modify Datasheets and Photo

documentation.

03 / 10 - 02 / 11 Goodrich Lighting Systems; Oldsmar, FL (Apex

Systems, Inc. Contract Hire - Contract Completed)

Program Director, Program Manager, Project Lead Engineer,

Environmental Testing Engineer

787

System certification and qualification testing per DO-160, MIL-

STD-481 and MIL-STD-810 (e.g. Solar Radiation Testing, Icing,

Temperature Shock, etc.) for certification by FAA and foreign

governmental agencies I also did the setups and conformities

here are some of the documentation recording methods used,

Astro-Med Data logger, Agilent Data logger, Laptops,

Datasheets and Photo documentation. Work site In Dallas TX.

Project Lead Engineer over 18 employees

11 / 07 - 01 / 09 Hawker Beechcraft Corporation (AKA Raytheon

Aircraft); Wichita, KS (P.D.S, Contract Hire - Contract

Completed)

Sr. Systems engineer avionics electrical, Air vehicle design

(Product development engineering)

KingAir legacy props

Review and develop design concepts features and data received

from customers, vendors and other groups for the King Air 350i

IFE Venue cockpit and cabin management system and the AirCell

Axxess/Iridium system. Perform research/analysis for pre &

post- supplier selection proposal(s) and bid(s).

Review/analyze data received customers, vendors and suppliers

for certification support and compliance of regulatory

documents, (e.g. DO-160, DO-178, DO-254 etc.) specifications

and technical requirements to provide guidance to engineering,

vendor(s) and other groups regarding design concepts and

requirements to ensure business objectives are achieved. I did

most all of the design research and development of

avionics/electrical and related systems. Apply research to the

planning, development, installation, integration design, and

testing of avionics and electrical systems, interfacing with

other aircraft design groups to meet changing program

requirements review/analyze vendor installation manuals and

creating: wiring diagrams. Use of pots, sip and data protocols

includes ARINC-429, RS-232, etc.

DANIEL A. NORTON

1802 Legend DR Garland, TX 75040 214-***-****

*************@*******.***

PROFESSIONAL EXPERIENCE:

11 / 06 - 11 / 07 Boeing; Wichita, KS (Wyatt & Associates INC, 11-

06/05-07) went to (Volt in 06-07/11-07 Contract Hire -

Contracts Completed)

Systems engineer (Mission insurance)

Integrated defense systems (IDS) 767, Tanker

FAA Electrical certification support, compliance certification

completion and MIL compliance performance analyses

04 / 06 - 11 / 06 Rockwell Collins; Cedar Rapids, IA (Volt, Contract

Hire - Contract Completed)

Sr. Systems engineer

P30, M145 and 787

Integration of Pro line 21 and IFE, avionics systems and

subsystems applications, identify physical and logical

properties interconnect and systems integration & simulation,

tasks include research and development, design, verification,

validation and integration of flight systems and experimental

flight systems with hardware and software engineering system

integrators suppliers, certification program and product

engineering. Support of capability maturity model Integrated

(CMMI). Data protocols include IEEE 802.3 ARINC-429, ARINC-

453, ARINC-653, ARINC-664 Ethernet, MS-1553, RS-232, RS-422,

RS-485, etc. and compliance of (e.g. DO-160, DO-254 etc.)

09 / 05 - 12 / 05 Raytheon Aircraft; Wichita, KS (MidCom, Contract

Hire - Contract Completed)

Systems engineer avionics electrical

Hawker 800XP

Modification of the experimental Hawker 800XP integration of

Collins Pro Line 21 avionics

04 / 05 - 06 / 05 New Piper Aircraft, INC; Vero Beach, FL (Precision

personnel, Contract Hire - Contract Completed)

Systems engineer avionics electrical design and development

P-44

Design and integration of the Avidyne Entegra integrated

flight deck systems located in new product development

section. Review, and issuing of documentation required for

change and changes to (WDM), (WHD/PL), (PL), (HUL), (BOM'S),

(ELA), (MM), installation drawings and kits, flight and ground

test procedures. In addition other engineering drawings and

documentation for presentation to and certification by FAA and

foreign governmental agencies

02 / 05 - 03 / 05 RocketPlane; Oklahoma City, OK (Sullivan and

Cogliano, Contract Hire - Contract Completed)

Sr. Systems engineer electrical avionics design and

development

XP-Rocketplane

Design of the power generation and distribution system (270-

VDC), and avionics for the new XP airship Rocket-Jet for PRD

11 / 04 - 02 / 05 PYKA Aerospace; San Antonio, TX

Sr. Systems engineer avionics electrical design

B-727, 737, 747, 757, DC-9

(RVSM), (ADS) modification design and (CCTS) creation, review,

and certification issuing of documentation required for change

and (STC), (ICA), including (EO'S). Changes to new and

existing (WDM), (WHD/PL), (PL), (HUL), (BOM'S), (ELA), (MM),

installation drawings and kits (ELA).

In compliance with FAA, JAA, LBA, JCAB and Boeing requirements

DANIEL A. NORTON

1802 Legend DR Garland, TX 75040 214-***-****

*************@*******.***

PROFESSIONAL EXPERIENCE:

03 / 04 - 09 / 04 Star Aviation; Mobile, AL (Aries group Inc, Contract

Hire - Contract Completed)

Systems engineer avionics electrical design & installations

Connexion by Boeing (CBB), B-747

Design, development, installation and integration of control

and power distribution units, avionics systems of satellite

communications link, airborne LAN, wireless cabin distribution

system, wireless local area network broadband two-way data and

entertainment communications services to commercial and

executive service aircraft as per customer options and

specifications. Allows access to internet direct broadcasts

video and audio stored. Rebroadcast video and audio satellite.

(SatCom Link). Live-TV (ELA), (WDM), (WHD/PL), (PL), (HUL),

(BOM'S), (ELA), (MM). Compliance with FAA, JAA, LBA, JCAB and

Boeing requirements

10 / 03 - 02 / 04 Cessna Aircraft CO; Wichita, KS (C.C.I Inc, Contract

Hire - Contract Completed)

Systems engineer electrical design & integration

CJ, s 525's and 510,

Writing specification, qualifications, susceptibility, tests

reports, procedures and other documents Engineered drawings

for new aircraft program in accordance with specified

requirements and documentation for presentation to vendors,

customers and certification by FAA and foreign governmental

agencies. CCD

02 / 03 - 03 / 03 Eaton Aerospace; Grand Rapids, MI (System pros Inc,

Contract Hire - Contract Completed)

RF, EMI, EMC, lightning engineer

Interact with engineers and laboratory to analyze and support

EMI, EMC, lightning and RF susceptibility test reports and

procedures,(e.g. DO160, MIL-STD-461, RE101,102,103RS101,103

and more) in accordance with specified requirements to provide

technical support for the resolution of EMI, EMC issues

discovered during testing with attention to accurate test

data. Understand setup and operation of test laboratory.

02 / 02 - 05 / 02 Associated air center; Dallas, TX (Judge technical

services, Contract Hire - Contract Completed)

Systems engineer avionics electrical design & integration

BBJ mods and upgrades

Design of custom avionics APU power current switching systems

and IFE systems installations. RF, EMI, EMC, lightning

considerations of requirements, Creation, review, and issuing

of documentation required for change and changes to (WDM),

(WHD/PL), (PL), (HUL), (BOM'S), (ELA), (MM), installation

drawings and kits, flight and ground test procedures. In

addition other engineering drawings and documentation for

presentation to and certification by FAA and foreign

governmental agencies

01 / 01 - 10 / 01 Boeing, Wichita, KS (Wyatt & Associates INC,

Contract Hire - Contract Completed)

Avionics electrical system design & integration engineer

B-747 CARGO MODS

Design of custom avionics systems. Installations and

integration for B-747 S.F. Avionics mods smoke fuel, lighting

and other systems. Creation, review and issuing of

documentation required for change and changes to (WDM),

(WHD/PL), (PL), (HUL), (BOM'S), (ELA), (MM), installation

drawings, flight and ground test procedures, and other

engineering drawings and documentation for presentation to and

certification by FAA and foreign governmental agencies

DANIEL A. NORTON

1802 Legend DR Garland, TX 75040 214-***-****

*************@*******.***

PROFESSIONAL EXPERIENCE:

08 / 00 - 01 / 01 Timco, Greensboro, NC (Smart, Contract Hire -

Contract Completed)

Avionics electrical system design & integration engineer

B-767, MD-11, and Delta airlines fleet

Designed the modification installations and integration of the

of the avionics and power systems for the B-767, MD-11 for the

Delta airlines fleet. EMI, EMC, lightning requirements.

Creation, review, and issuing of documentation required for

change. (STC) certification and engineering, responses to

(SB), including (EO) changes to (WDM), (WHD/PL), (PL), (HUL),

(BOM'S), (ELA), (MM), installation drawings, and other

engineering drawings and documentation for presentation to and

certification by FAA and foreign governmental agencies.

AutoCAD-14, AutoCAD-2000 LT

06 / 00 - 08 / 00 Hollingsead international, Santa Barbara, CA (CED &

Associates, Contract Hire - Contract Completed)

Avionics electrical system design & integration engineer

B-737-300 / 500 / 700 / 800 and BBJ

Designed the installations and integration of the of the

avionics systems for Aero-I SATCOM, SATCOM-2000, and (CCTS).

Creation, review, and issuing of documentation required for

change(s) to (STC), (WDM), (WHD/PL), (PL), (HUL), (BOM'S),

(ELA), (MM), installation drawings and kits, EMI, lightning

considerations of requirements, and other engineering drawings

and Documentation. AutoCAD-14-2000

02 / 00 - 06 / 00 Stevens aviation, Greenville, South Carolina

(Contract Hire - Contract Completed)

Avionics electrical system design & integration engineer

Most of these were military aircraft and programs.

All additional details are CLASSIFED Information.

09 / 99 - 01 / 00 Galaxy, Fort Worth, TX (Contract Hire - Contract

Completed)

Avionics electrical system design & integration engineer

Galaxy, Astra, Astra~SPX

Design of custom avionics (WDM), (WHD/PL), (PL), (HUL),

(BOM'S), (ELA), (MM), installation drawings and kits.

Extensive coordination between, contracts, purchasing,

vendors, DER'S, and customers preparation of documentation

required for FAA and foreign governmental agencies TC and STC,

including service bulletins, (AFMS), and instructions for

continued airworthiness, electrical compliance checklist,

electrical load statement, flight and ground test procedures.

Systems include FADEC, EFIS, EICAS, FMS, audio, UCD, weather

radar, Stormscope, GPS, INS, IRS, EGPWS, KHF-950, NORTHSTAR CT-

1000, UNS-1C, UNS-1K, MagnaStar radio telephone, Aero-I and

Aero-M SATCOM, IFE, aerial view camera system, cabin

entertainment system, materials requirements traceability,

COTS selection, and others. All systems installations included

considerations of requirements for RF, EMI, EMC and lightning

IFE systems installations and integration. Using AutoCAD-14

1998 - 1999 Bombardier Learjet, Wichita, KS (Contract Hire - Contract

Completed)

Flight test, instrumentation tech "experimental class

aircraft"

DeHavilland dash 8, 400 series, (and some Lear-45, 30, 60)

Responsible for the installation of ADF and IFE systems for

the DeHavilland dash 8,400 series aircraft Involved in the

installation and placement of accelerometers other sensors and

intercom systems. Installed and tested FMS, HF and VHF systems

for DeHavilland aircraft. I worked on experimental

instrumentation racks for 400 series aircraft. All systems and

equipment installations

DANIEL A. NORTON

1802 Legend DR Garland, TX 75040 214-***-****

*************@*******.***

PROFESSIONAL EXPERIENCE:

1997 - 1998 Lockheed Martin, Greenville, SC (Contract Hire - Contract

Completed)

Avionics electrical system design & integration engineer

DC-9, C-9, KC-10, C-130, AC-130H, P-3A, B, C, and P-3 AEW, DC-

10

Responsible for the I.C.S. (Inter communication system)

installation involved in the design of ICS-42 system for NP-3d

AEW, aircraft, APS-145 color radar, and Doppler radar.

Responsible for aircraft avionics communications and

navigation equipment, including FADEC, EMI, EMC, EMP, HIRF

requirements, power distribution and current switching systems

in FWD load center and APU. Documentation for presentation and

certification by FAA and Foreign governmental agencies all

additional details are CLASSIFED Information

1996 - 1997 Gulfstream aerospace, Savannah, GA (Contract Hire - Contract

Completed)

Technician and Avionics liaison engineer on the floor

G-2, G-3, G-4, G-5,

Responsible for data conversion of blueprints to personnel on

the floor In addition, to handle all issues with

communications, navigation, FADEC, power distribution, current

switching systems and anything electrical

1995 - 1996 Northrop Grumman aircraft, Lake Charles, LA (Contract Hire -

Contract Completed)

Avionics liaison engineer

C-18, J-STAR, KC-135, B-707

These were military aircraft and programs. All additional

details are CLASSIFED information.

1988 - 1995 DMI Industries: Fullerton, CA

C.P.S. Aviation electronics, La Mirada, CA (Sold-out to DMI in

1990)

Southern Calif. Regional supervisor

Aircraft (UNDER 12,500 G. W) "Supervisory"

Supervisor over 300 avionics liaison engineers, avionics

mechanics and planners,

EDUCATION:

1983 - 1988 Harrington University

London, England

Honors List (Bachelors of Science with Honors - Electrical

Engineering BS / EE)

Graduated Suma cum Laude (GPA 3.8/4.0)

1981 - 1982 Brookline Tech

Anaheim, CA

(Electrical, Avionics)

1980 - 1981 N.T.S

(Electrical, Avionics)

Contact this candidate