Electrical Engineer

Career Objective

PERSONAL DETAILS With an experience in the field of Testing and Commissioning of

Transformers, I look forward for an opportunity to display my

Name : B.VELMURUGAN skills in the field of Testing & commissioning, Maintenance and

Execution of projects related to transformers and Alternators.

Date of Birth : 09.05.1987 Educational Qualification

B.E. (ELECTRICAL & ELECTRONICS ENGINEERING)

Nationality : Indian Anna University),Class : First class, Course type : Full time

Year of passing : 2009

Sex : Male

PRESENT EMPLOYER : VOLTEC ENGINEERS PVT LTD, CHENNAI

Designation : Sr. Testing and commissioning

Engineer

Work Experience : 4 Year 1 month

PASSPORT DETAILS:

Skill Set

Passport No. : J5772226 Testing and commissioning of all Electrical equipment from 415

Place of Issue : CHENNAI volts to 400 KV & 765 KV System.

Date of Issue : 30.05.2009 Annual Maintenance of testing CB, T/F, CT, PT,LA and Motor

Expiry Date : 29.05.2021 Control and Protection scheme checking in

Knowledge about protection scheme such as Differential,

Overall differential, REF, Over current, Bus bar differential,

Email id: Distance protection.

*************@*****.*** Quickly adaptive and expertise in new and emerging

Technologies.

Nature of work

Contact no: Testing & Commissioning :

+919********* Testing and commissioning of 415V to 400KV Indoor / Outdoor

+919********* substation and substation equipment's.

Power Transformers of capacity 350MVA and above & station /

Distribution Transformers.

Address: Testing & Commissioning of Static and Numerical Protection

Relays of various types of leading makes.

S/O.R. BALASUBRAMANIYAN, Indoor and outdoor substation and substation equipment's with

36, SATHAPADI STREET, all type of switchgears SF6GCB, VCB, MOCB, ACB's.

CHIDAMBARAM All type of protection relays, of leading makes of static and

CUDDALORE - 608001. microprocessor based relays.

Maintenance testing of relays, Breaker and calibration of Elec.

Meters.

Preparation of cable schedule and termination schedules.

Trouble shooting of various electrical system at different type

of process Plants and power plants.

Testing and calibration of all meters.

Some of the jobs which were executed by him successfully are

briefed below :

Testing & commissioning of 220 kV Switchyard for 195 MW

Combined Cycle Gas Power plant, Samalkot including Protection,

cable schedule preparation, control scheme preparation &

overall scheme checking through M/s. BSES Ltd., Hyderabad & EPC

Division, New Delhi

Testing & commissioning of different Electrical equipments such

as CTs, PTs, Circuit Breakers, Isolators, Protection Relays

LANGUAGES KNOWN: Protection, overall scheme checking, Cable Schedule preparation

and as-build drawing preparation for 220 KV Substation and its

Tamil, English and Hindi protective relays for RTPS, Raipur through M/s. ABB Ltd.

Testing & commissioning of Electrical equipments such as CTs,

PTs, Circuit Breakers, Isolators, Protection Relays and overall

scheme checking of 400 / 220 / 33 KV Substation and its

protective relays at Kolar Karnata for CGL Ltd

Testing & commissioning of Electrical equipments such as CTs,

PTs, Circuit Breakers, Isolators, and overall scheme checking

of 110 / 11 KV Substation and its protective relays for TELK at

Karaikal, Tamil Nadu

Testing & commissioning of Electrical equipments such as CTs,

PTs, Circuit Breakers, Isolators, and overall scheme checking

of 132 / 33 kV Substation (4 nos) and its protecting relays,

for APTRANSCO through M/s. BSES Ltd.

Testing & commissioning and overall scheme checking of 66 / 33

KV Substation equipments such as CTs, PTs, Circuit Breakers,

Isolators and its protective relays for Alstom Ltd, Delhi

Testing & commissioning and overall scheme checking of 33 / 11

KV Substation equipments such as CTs, PTs, Circuit Breakers,

Isolators and its protective relays for Siemens Ltd, Delhi

Testing & commissioning and overall scheme checking of 21 KV /

415 V Switchgear equipments such as CTs, PTs, Circuit Breakers,

Isolators and its protective relays for Alstom Ltd, Himachal

Pradesh

Testing & commissioning and overall scheme checking of 132 / 33

KV Substation equipments such as CTs, PTs, Circuit Breakers,

Isolators and its protective relays at Raipur, Chattisgarh for

EMCO Ltd

As a power performance tests

Vibration analyzing of rotating &static machine

Noise measurement of reactor, generator, motor etc

Power analyzer of motor energy consumption, transformer etc

Thermo vision analyses of transmission conductor joined(using

27mm lens Flir systems E-300)

Harmonic Analyzes

Hi-Pot testing of cables and Bus bars

Dew point check of Sf6 breakers and rectors, Transformer's and

cylinder

Co-ordination with client in As Built Scheme drawing

submission, test report submission and co-ordination during all

site activity to satisfy the customer

As a sweep frequency response analyzer (SFRA)

Analyze the transformer and reactor physical condition:

winding to winding distance, winding to tank distances, buck

hooking, winding to winding short, oil factor, bushing

tightness, winding displacement winding deformation,etc(315

MVA transformer,50MVAR,80MVAR reactor etc (using DOBLE M500kit)

and Megger.

As a Testings transformer's upto 315 MVA

Ratio test

winding resistance upto 60Ampere (using Tinsley,scope, Eltel)

Magnetic balance& magnetizing current

vector group

Polarity check for single Phase transformers

break down voltages for transformer oil

separate source voltage test

PI&IR value test

floating neutral test

short circuit test

% of impedance measurement.

Surge comparision analyzer of CT 3 phase coils

HHHhhhhhhhHHHHHHigh voltage Capacitance and Tan delta

measurement

As a Capacitance& Tan Delta Measurement (C&DF)

CT, CVT, PT, IVT, Coupling capacitor, Upto 315 MVA

transformer, shunt and Bus reactor, motors, Generator

capacitance and Tandelta measurement Upto 10,600KVA,Upto 765 kV

Grading capacitance check,Surge arrester upto 400kV and

Temperature correction factors are applied (using ELTEL and

DOBLE M4000 kit, Megger kit )

As a Testing Done For CT'S, CVT, PT'S, Surge Arrester &

Isolator Switches

Insulation Resistance Measurement

Winding Resistance Test

Knee Point Voltage and excitation measurement

Ratio Test

Polarity Test

Stability Test

Surge Comparison Analyzes for CT 3 Phase Coils

Surge Counter Check for Surge Arrester

Static contact resistance check(CRM)

Experience with ALSTOM RELAYS

Micom P442- Distance protection

P630 - Transformer Diff.Protection

Micom-P343- Generator Protection

Micom127- Directional O/C & E/F Protection

Micom121,111 O/C & E/F Protection

Experience with ABB Relays

REL521- Line Protection

REM543, REM 545, - Generator Protection

RET 521,RADSB,-Transformer Diff.Protection

REX 521, SPAJ140-C, REJ521 - O/C & E/F Protection

Experience with SIEMENS Relays

7SJ6005,7SJ6225-O/C & E/F Protection

7UT612- Transofrmer Diff.Protection

CT & CVT Testing

Auxiliary Relays testing

Backup relay testing

Primary injection up to relay end.

Bus bar & Transformer sensitivity & stability test

DC scheme check

Trip coil supervision Circuit & Current measurement checks

Trip logic checks

CB fails functional checks

Secondary injection

Meter calibration

Out going feeder identification

REF - Sensitivity & Stability test

As a Maintenance Engineer

Maintenance of electrical equipments like Circuit breaker,

Transformer, CT, PT, CVT, LA, Isolator and battery charger.

Preventive Maintenance for HT and LT Motor

Experience

EXPERIENCE SITE DETAILS

Project : 2*600 Mw Udupi Power Cor. Limited

Client : M/s. Lanco. Limited

Customer : UPCL, Udupi, KA

Project : 1200 KV,SUB STATION

Client : M/s. SAEE TRAFO LINE PVT.LTD

Customer : PGCIL, BINA, UP.

Project : 400/220 KV Sub Station

Client : M/s. Techno Electric and Engineering Co. Ltd

Customer : PGCIL, Jaisalmer, Rajastan

Project : 220 KV Sub Station

Client : M/s. Larsen & Toubro Limited

Customer : Tatweer Petroleum, Bahrain, Kuwait

Project : 220/33 KV Sub Station

Client : M/s.ABB. Ltd

Customer : PGCIL, Maithan,WB

Project : 1*500 MW KSTPP

Client : M/s. Techpro System Ltd

Customer : NTPC, Korba, CH

Testing & commissioning of 400KV Substation, Testing of CT, PT,

Breaker, Isolator & Transformer and motor protective relays,

Cable schedule preparation for NTPC at Simhardi, Andhra Pradsh

.1

Operation & Maintenance of 400KV & Switchyard control room,

500 MVA Power Transformer & 16 MVA Unit Transformer & its

Auxiliaries at JSW ENERGY (Bellary) Karnataka. and NTPC, 1*500

MW,Korba,CH

Declaration

I consider myself familiar with Electrical and Electronics

Engineering Aspects. I am also confident of my ability to work

in a team.

I hereby declare that the above-mentioned information is

correct up to my knowledge and I bear the responsibility for

the correctness of the above-mentioned particulars.

Thanking you.

Place: chidambaram

Date:

You're truly

B.VELMURUGAN

Contact this candidate