Rodolfo Abellera Jr. - Sr. Electrical Engineer
Rodolfo Abellera Jr. PEE, UPDA-GA
SR. Electrical Engineer
Mobile: +974********
Date of Birth : December 5, 1967
Nationality : Filipino
Working Languages : English, Tagalog
Profession : Professional Electrical Engineer
Education
Bachelor of Science in Electrical Engineering – Don Mariano Marcos Memorial State University, Mid La-Union Campus, San Fernando La Union, Philippines.
Date of Graduation: October 1991
Key Qualifications
More than 23 years of work experience
Site Management
Communication Management
Time Management
Computer literate
Professional Experience
Period : 9 May 2016 - present
Employer : Kernel Engineering Consultants
Position : Electrical Engineer (Supervision Consultant) Projects include:
Abraj Quartier AQ3,AQ4 & AQ5,AQ6 – Construction of 4 Towers (B + G+ 42F), Town Houses, Standard & VIP Villas @ Abraj Quartier, The Pearl Qatar Duties & Responsibilities:
Review of as-built drawings for all LV and ELV installations.
Responsible for the review, evaluation, and processing of all submitted Work Inspection Requests and Material Inspection Requests by the MEP contractors using the Aconex software for the accuracy of all attached documents prior to actual site inspection and verification.
Review and signing of different types of site clearances prior to implementation (i.e., embedded PVC conduits & boxes prior to slab casting, prior to wall plastering, prior to floor screeding and the like).
Attended all Work Inspection Requests submitted by MEP contractors to check and verify if the completed works are in compliance with the approved shop drawings, project specifications, local authority standards and international standards, and all applicable electrical codes.
Attended all Material Inspection Requests submitted by MEP contractors to check and verify if the materials arrived on site are in compliance with the approved material submittal. All rejected materials were removed from site within 24 hours’ time. Rodolfo Abellera Jr. - Sr. Electrical Engineer
Witnessed all Electrical testing and commissioning activities on site by the MEP and specialized contractors for all LV and ELV installations.
Witness FAT procedures for LV panels, MCC panels, MDB’s, DB’s and others in manufacturer’s factory.
Period : January 7, 2009 – March 23, 2016
Employer : Projacs International
Position : Sr. Electrical Engineer / Project Coordinator Projects include:
Project management and consultancy services for various Sports Facilities of Qatar Olympic Committee / Ministry of Culture and Sports
Duties & Responsibilities:
Assigned as team member (client representative) of the Facilities and Projects Department. Responsible in accepting new projects close-out by following the standard project handover procedures. Making sure that all the electromechanical installations are in compliance with the design criteria of the project.
Checked all handover documents not limited to as-built drawings, operation & maintenance manuals, warranties and guarantees, testing and commissioning reports, spare parts lists, local and international vendor’s lists, QCDD approvals, and other related hand over documents.
Assigned as Project Engineer to manage and oversee the routine maintenance and operation of electromechanical installations for LV and ELV installations for Sports Facilities, Cultural and Social Centers under the Qatar Olympic Committee / Ministry of Youth & Sports venues all over the State of Qatar by a third party contractor.
Assigned as Project Engineer to manage and oversee the routine maintenance and operation of swimming pools, Jacuzzis, saunas, steam rooms, and fountains @ all Qatar Olympic Committee / Ministry of Youth & Sports venues all over State of Qatar by a third party contractor.
Prepared minor pre tender and post tender documentations not limited to scope of works preparations, technical evaluations, tender site visits, completion reports, completion certificates, invoice evaluations and others.
Attended progress meetings and responded to regular correspondences from the start until completion of every projects being handled.
Knowledgeable in computerized maintenance management system (CMMS) using the Maximo Software. Evaluated and processed all PPM and CM work orders in the system being done by third party contractors.
Participated in the establishment of the Facilities and Projects Department yearly capital budget.
Appointed by the client as Venue Site Manager during the ARAB GAMES 2011 by managing the preparation of all temporary MEP works required by the different Federations of the said tournament.
Rodolfo Abellera Jr. - Sr. Electrical Engineer
Period : April 4, 2004 – November 30, 2008
Employer : Al Majal Al Arabi Group, Saudi Arabia
Position : Sr. Electrical Engineer
Projects include:
Operation and maintenance of all non-medical equipment of King Khaled Civilian Hospital in Tabuk, Kingdom of Saudi Arabia.
Duties & Responsibilities:
Responsible for the operation and maintenance of all non-medical equipment and facilities such as 13.8kV substation of 2x 3.15 MVA capacity main transformers, standby generator sets of 4 x 2.35 MVA capacity, medium and low voltage switchgear (13.8 kV/380V/220V), distribution transformers from 1000 kVA up to 2000 kVA capacity, motor control centers, distribution boards, and switchboards, hospital staff housing and nursing school.
Prepared and submitted monthly PPM and CM accomplishment reports to the Ministry of Health Engineer as requirement prior to the issuance of monthly services payment.
Supervise the troubleshooting and repair of motor controls such as PLC and frequency converter operated washing machines, roller and folder machines, dryer machines including programming, steam boiler motor controls, water treatment and sewage treatment motor controls, firefighting system, and any other motor control centers.
Supervise the troubleshooting and repair or replacement of defective control transformers and bus bar protections such as over current relays, earth fault relays, buchholz relays, over temperature relays, CT’s, metering and others.
Period : May 19, 1999 – April 3, 2004
Employer : Project for Health Programmes, Kingdom of Saudi Arabia Position : Electrical Engineer
Projects include:
Operation and maintenance of all non-medical equipment of King Khaled Civilian Hospital and Al Qunfudah General Hospital in Tabuk, Kingdom of Saudi Arabia. Duties & Responsibilities:
Designated as Shift Engineer for the operation and maintenance of all non-medical electrical equipment’s and facilities of Qunfudah General Hospital for two years and King Khaled Civilian Hospital for three years in Kingdom of Saudi Arabia.
Supervised and delegated job orders for electricians, plant operators, carpenters, plumbers, A/C and HVAC technicians, and electronic technicians for the implementation of daily routine jobs, periodical preventive and corrective maintenance works. Period : October 1992 – July 1995
Employer : Heng Ming Industrial Philippines Incorporated Rodolfo Abellera Jr. - Sr. Electrical Engineer
Position : Quality Controller
Duties & Responsibilities:
Handled production line consisting 22 units press machines of 25 up to 110 tonnes capacity.
Evaluated electronic metal parts produced by each machine based on specified drawings and costumer approved samples prior to mass production.
Checked randomly parts produced by each machine in all stages of production for sure to maintain its proper dimensions, good quality output, and to attain costumers satisfaction. Trainings & Seminars Attended:
Earthing and Bonding Design and Calculation – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, February 15, 2019
Lighting Risk and Protection – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, November 2, 2018
Fire Alarm Systems – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, September 7, 2018
KAHRA-MAA Procedures & Requirements on Electrical Installations – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, November 6, 2015
KAHRA-MAA Distribution Substation – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, June 5, 2015
Power Distribution System for High Rise Building – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, April 10, 2015
Project Management Professional Program - Projacs International, P.O. Box 7286, Doha, Qatar, November 16 – 20, 2014
Elements of a Distributed Control System – Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, April 29, 2011
Subsea Cable Design for Offshore Platform - Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, April 29, 2011
Green Energy Solutions in Electrical Distribution System Design - Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, October 8, 2010
Design of Cabling System for Non-Linear Loads Harmonics & EMC - Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), State of Qatar Chapter, October 8, 2010
Project Close-Out: Testing, Commissioning, & Handover – Projacs International, P.O. Box 7286, Doha, Qatar, April 16 – 18, 2010.
Building Management System Operation – Honeywell Turki Arabia Limited conducted @ King Khaled Civilian Hospital, Tabuk, K.S.A., September 9-12, 2007.
Protective Relaying & Power Metering - Institute of Integrated Electrical Engineers of the Philippines, Incorporated (IIEE), held @ BCI Steel Plant, July 14-15, 1990
On the Job Training Manila Thermal Power Plant – National Power Corporation, Manila, Philippines, March 3 - May 3, 1990