Electrical Engineer Manager

MARK ACE O. FLORES

Address: Al Hilal Doha, Qatar

Mobile No.: +974-****-**** / Company No.: +974-****-**** Email Address: *************@*****.***

Nationality: Filipino

OBJECTIVE

Organized and motivated professional with more than 10 years of experience looking for an electrical engineering position where I can contribute to its success and profitability through the application of my acquired knowledge and skills.

EXPERIENCE

• Reviewing contractor’s Submissions (shop drawings, materials, RFI, and close out documents.

• Review Construction Method Statement, Procedures, and ITPs to ensure they meet project specifications and requirements.

• Review material certificate for project material to ensure it meets project specification and check that it corresponds to actual material supplied as per approved material submittal.

• Identify any non-conformance and any issues that my adversely affect the works, discuss with the construction team and report/recommended solutions.

• Assist in reviewing the process of variations and claims.

• Responsible for inspection and verification of all Electrical works in accordance with QCS and Project Specification.

• Inspect works and witness testing as per Hold, Witness/Review and Surveillance point

• Responsible to check the Pre-Commissioning test such as: Insulation Test, Earth resistance test, Conduct internal testing of prior to Final Testing and Commissioning.

• Coordinating with the other disciplines, departments and QC staff, reports conflict and assist in resolution of them

• Attend week project progress meeting, discuss the ongoing project execution and inspection activities.

• Act positively and participate in all health and safety issues at site, as required by the project safety.

• Background in low voltage; Fire Alarm, Telephone and Data communications, SMATV, Access control, CCTV, LCP, GRMS, BMS,

MMUP – Waiting for the Schedule of exam with application No. 60430

Philippine RME License Number 0059059

ARAMCO Approval as Pre-Testing and Commissioning Engineer

FMP – Facility Management Professional Certificate POSITION:

Senior QA/QC

Electrical &

Instrumentation

Engineer/Inspector

COMPANY:

Contraco W.L.L.

PROJECT:

Salwa Hotel and

Resort

Doha, QATAR

Dec. 2016 - Present

MARK ACE O. FLORES

Page 2

• Responsible for inspection and verification of all Electrical works in accordance with Saudi Aramco Inspection Checklist (SAIC), Saudi Aramco Engineering Standard (SAES).

• Conduct inspection of all material receiving on site prior to installation to make sure that all materials are as per specification and latest version of Saudi Aramco Materials Specification and Standard (SAMSS) and other applicable industry codes and specification of area.

• Review material certificate for project material to ensure it meets project specification and check that it corresponds to actual material supplied as per approved material submittal.

• Coordinating with the other disciplines, departments and QC staff, reports conflict and assist in resolution of them.

• Prepare daily report and record of inspection status, and comments requiring correction.

• Inspect works and witness testing as per Hold, Witness/Review and Surveillance point.

• Report to QA/QC Manager and construction Management team on the comments and any day to day quality issue.

• Ensuring all records is obtained from engineers’ inspection and from the subcontractor.

• Attend week project progress meeting, discuss the ongoing project execution and inspection activities.

• Responsible for Testing and Commissioning of the following Equipment’s. Air Handling Unit

Variable Air Volume

Fan coil Unit

Fume hood

Exhaust and Supply Fan

Motors and Pump

Sewage Ejection Pump

Tank less Water Heater

Sea Water Laboratory Life Support System

• Responsible to check the Pre-Commissioning test such as: a. Insulation / Continuity test of all wiring system prior to termination of equipment and panel board

b. Current injection Test.

c. Earth resistance test of the grounding system as per Saudi Aramco Engineering Standards.

d. Conduct internal testing of Equipment connected to electrical work prior to Commissioning.

POSITION:

QA/QC Electrical

Engineer/Inspector/

Pre-Testing &

Commissioning

Engineer with

ARAMCO approval

COMPANY:

Hamad Al-Alaiwi

and Partner’s

Contracting Co. Ltd.

PROJECT:

King Abdullah

University of

Science and

Technology

Jeddah, SAUDI

ARABIA

May 2014 – Jun 2016

MARK ACE O. FLORES

Page 3

• Responsible for inspection and verification of all Electrical works in accordance with established procedure and inspection & test Plan (ITP) to confirm compliance with Contract Documents, drawing and specification.

• Review Construction Method Statement, Procedures, and ITPs to ensure they meet project specifications and requirements.

• To be aware of safety and environmental issues for the construction work comply with SOJV and Project requirements.

• Inspect works and witness testing as per Hold, Witness/Review and Surveillance point identified in the approved ITP

• Material receiving inspection. Monitoring of Handling, storage and protection of the product.

• Attending QC inspection tours and system walk down inspection.

• Prepare daily report and record of inspection status, and comments requiring correction / completion.

• Report to QA/QC Manager and construction Management team on the comments and any day to day quality issue.

• Identify any non-conformance and any issues that my adversely affect the works, discuss with the construction team and report/recommended solutions.

• Following up inspection comments to confirm that they are addressed, responses are completed and compliance with the contract documents, verification of closing out QANs and NCRs with Engineers close out.

• Carry out progressive partial turnover punch list items to ensure that the works are completed to the fullest extent possible to acceptance.

• Handover Team leader conduct punch listing inspection prior to hand over to Overseas Bechtel Incorporated.

• Attend joint inspection together with Project Management OBI (Overseas Bechtel Incorporated) and client Representative (CPG Corporation)

• Synchronize the punch in ZUTEC system to monitor all punch items.

• Do verification on site to confirm the closing of punch items.

• Maintains and update work schedules, planning and other informative control in monitoring the project progress and activities.

• Prepare regular inspection for roughing installation and wiring installation

(lighting, Power, Auxiliary and Fire Alarm system).

• Coordinate to other trade for the conflict issue.

• Attending MEP staff meeting for the other concern and requirements of other discipline.

• Initiator for plan review and raised for Request for Information (RFI) and Request for Approval (RFA).

• Insure the implementation of the quality standard and objectives of the department and project assignment.

• Interpret schematic diagram & construction drawing for site implementation.

• Responsible to make decision for implemented site condition of electrical work.

• Following all commissioning Safety Rules

• Understanding the Commissioning administration Procedure for the project.

• Following the commissioning procedure from Component Test Acceptance

(CTA), System Acceptance Test (SAT) and Functional Test Acceptance (FTA).

• Incorporating safe working practice into the commissioning Procedure.

• Undertaking Pre-Operational Testing activities.

•

POSITION:

QA/QC Electrical

Engineer/ Walk Down

Inspector

COMPANY:

Sky Oryx Joint Venture

– Taisei Corporation /

TAV

PROJECT:

New Doha International

Airport / Hamad

International Airport

Doha, QATAR

Dec. 2010 – Dec. 2013

POSITION:

Electrical Site Engineer

COMPANY:

Al-Khaleej Modern

Lights W.L.L.

PROJECT:

Abdullah Ali Al-Majid

Est/Swiss Bell Hotel

Doha ; Al Rayyan T.V.

Station ; SH, Jabor

Jassim J.M.

Doha, QATAR

Oct. 2007 – Nov. 2010

MARK ACE O. FLORES

Page 4

EDUCATION

Polytechnic University of the Philippines (PUP)

Bachelor of Science in Electrical Engineering

Lopez, Quezon Branch (Philippines)

Year Graduated: 2007

PROFESSIONAL AFFILIATION

Member of Institute of Integrated Electrical Engineer Qatar CERTIFICATIONS & TRAININGS

ACHIEVEMENTS AND LICENSED

SKILLS AND ABILITIES

Mid Evaluation awardee for having significant good record for the month of May to July 2012

Registered Master Electrician (RME) – August 2018 Licensed Number: 0059059

FMP – Facility Management Professional Certificate – Pro-Guide Qatar Doha, Qatar (May 5 to 10, 2019)

2D, 3D AutoCAD – Meralco Foundation Institute

Ortigas, Philippines (October 10 – November 15, 2011)

Induction to Safety Training – Sky Oryx Joint Venture Doha, Qatar

Quality Management – Velosi QCDD

Doha, Qatar (March 1, 2013)

Project Management – Velosi QCDD

Doha, Qatar (March 29, 2013)

Project Management – Philippines Society of Mechanical Engineers, Jeddah Chapter Jeddah, Saudi Arabia (November 21, 2014)

Daikin Air Conditioning Product Presentation - Philippines Society of Mechanical Engineers

Jeddah, Saudi Arabia (December 12, 2014)

Install Mechatronics Device (Pneumatic & Electro-Pneumatic) Meralco Foundation Institute Ortigas, Philippines (August 20 – October 1, 2016)

Can handle large group of people for project and activities

Knowledge in 2D and 3D AutoCAD

Well verse in MS Application and Internet browsing

Installation of Electrical wiring

Can read electrical, mechanical, Civil and Architectural drawing

Background in low voltage; Fire Alarm, Telephone and Data communications, SMATV, Access control, CCTV, LCP, GRMS, BMS,

Background in principles and practices of electrical generation, engineering design and construction, NEC, NFPA, QCS, Kharamaa

Result-oriented and Hardworking

Leadership skills

Time Management

MARK ACE O. FLORES

Page 5

REFERENCES

Engr. Oscar Almenario

Project Engineer

Saudi ARAMCO Project Management

(Jeddah, Saudi Arabia)

Contact No.: +966-**-***-****

Engr. Armando Magalang

QA/QC Manager

HAPCO Hamad Al-Alaiwi & Partner’s

(Jeddah, Saudi Arabia)

Contact No. +966-**-***-****

Engr. Floro Espina

QA/QC Manager

Contraco W.L.L.

(Doha, Qatar)

Contact No.: +974-********

Engr. Aneesh V. S.

Electrical Engineer

Dar Al-Handasah

(Doha, Qatar)

Contact No. +974-****-****

Contact this candidate