Electrical Engineer Engineering
Resume:
Ismail P Kinattingal
Address:
Massadr HR services, Yanbu al
Bahr-41912, Saudi Arabia
Mobile:
Telephone:
E-mail:
******@*****.***
A dynamic professional with 13 years of rich & extensive experience in Engineering, managing and working in Electrical and Instrument Installations pertaining to the oil & Gas industries, commercial projects and residential facilities with EPCs and PMCs.
Having full working knowledge with good experience in the following areas of EPC/PMC project activities: field engineering, coordination, supervision, inspection, equipment installation, pre-commissioning and commissioning activities for HV, MV and LV electrical equipments, such as Transformers, Bus ducts, Switchgears, Motor Control Center’s (MCC), Variable Frequency Drives (VFD), synchronous and Induction motors, Excitation panels. Testing of several auxiliary & protection relays and metering devices. Also involved in inspection of installation and testing activities for cathodic protection and Electrical heat tracing systems.
Also experienced in instrumentation installations such as DCS/PLC, Instrumented Protective Systems, Tank Gauging System, Single Loop Controllers, Control Valves, Mass Flow Meters, Valve Positioners, Electronic Transmitters, Gas & Fire Detectors, H2S Monitors, Pneumatic Transmitters & Controllers, Radar level transmitters, etc.
Conversant with various Electrical Codes, Standards & Engineering Specification like BS, IEC, IEE, API, NEC, NEMA, NETA, hazardous area classification, degree of protection of Electrical equipments and their enclosures, explosion proof equipments, components & Installation.
AREA OF EXPERTISE
Project Engineering, inspection, Testing and commissioning of various equipments and instruments as well as conducting tests to ensure effectiveness of contractor’s installations.
Reviewing quality and engineering documents and technical specifications for installation through commissioning of the equipments.
Field engineering, inspection and coordination for various installations in the project.
Excellent knowledge in Protective device coordination, load flow analysis, short circuit analysis, motor staring analysis, transient stability analysis, generator transients, harmonic analysis, ground grid study, transformer sizing, cable sizing, Generator sizing, grounding and underground raceway systems.
E&I construction/installation procedures, ITPs, technical bid evaluation (contractor, sub-contractor, vendor), material approval finalization, vendor data drawing, interface schedules etc.
Site survey and database preparation for all major electrical equipments.
Project execution; field engineering support, construction, hook-up and commissioning queries.
Electrification works for Residential, Commercial and Industrial systems and Fire alarm, smoke and Gas detection system etc.
EMPLOYEMENT DETAILS
Massadr HR Services Company - Yanbu.
Job Title: Project Engineer)E&I)
Jun’2018 to Present
Works for Client: - Saudi Aramco Exxon Mobil Refinery (SAMREF), Yanbu.
Duties and responsibilities:-
•To have single point responsibility for the execution of engineering projects of multidiscipline nature through the following stages,
-From handover of the concept through to the development of a fully defined project specification.
-Definition of project strategy and plan and gaining acceptance from management for the execution in accordance with that strategy.
-To prepare tender documents and evaluate subsequent bids on a commercial and technical basis and prepare recommendations for contract award.
-To exercise control over manpower and resources in order to execute the project in accordance with management approved strategy, whilst maintaining project expenditure within budget.
-To report progress on projects in a timely manner highlighting issues that could impact on quality, cost or schedule.
•Primary interfacing with project management on matters relating to development of engineering progress, quality, scope and schedule.
•Assessment of deliverable needs, preparation of engineering schedule and estimation of design engineering man hours for the projects.
•Lead and supervise the assembled design engineering team in execution of FEED and development of detailed design engineering deliverables.
•Experience in the following engineering and design deliverables,
-MV&LV power distribution systems
-Sizing calculation of electrical equipments like transformers, switchgear, diesel generators, AC & DC UPS, cables, lighting, grounding etc.
-Load flow, short circuit and motor start up studies, protection coordination and arc flash studies using ETAP.
-Substation layout, cable route layout, hazardous area classification layout, earthing and lightning layout, lighting layout, fire alarm and communication system.
•To ensure SHE matters are given due consideration in project planning and during project execution. Adhere to instruction of supervisor in accordance to SAMREF SHE policy and procedures.
•Actively pursue the application and evaluation of new technology in order to optimize future developments in terms of cost, operability, maintenance and safety.
•Propose/review design solutions, prepare/review data sheets, perform/review bid evaluations and advise on electrical and instrument portion of the work.
•Review and ensure that FAT and SAT are as per SAMREF QAP. Witness and approve FAT and SAT at factory and site respectively.
•Review package/skid vendor drawings for E&I interface. Revise P&IDs as per the new changes to E&I portion.
•Preparation and management of the production of project completion documents e.g. operation & maintenance manuals from vendor, maintenance schedules, As Built drawings, inspection, testing and commissioning certificates for handover to the client.
•Float material requisitions (PR&CR), create WBS, release orders, functional locations and spare parts list in SAP.
•To give support to other discipline engineers and approve their electrical documents.
Dar Al Riyadh Engineering - Yanbu.
Job Title: QA/QC Lead
May’2016 to May’2018
Works for Client: - Saudi Aramco Exxon Mobil Refinery (SAMREF), Yanbu.
Project: - Heater Safety System(HSS) Project
Duties and responsibilities:-
Working as QA/QC Lead reporting to Engineering Coordinator. Fully in charge for maintaining quality in the project as per SAMREF’s Project Quality plan.
Key activities:-
Monitor all quality related activities on the project.
Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
Review quality inspection personnel qualification and training requirements
Monitor the progress and effectiveness of the project quality management system. Coordinate all QA/QC activities with the Contractor’s QC Manager.
Monitor the disposition of all issued non conformance reports (NCRs).
Support the quality inspectors to ensure the construction activities and materials to be used in job site if it is relevant to the requirements of the project specification. Provide direction in implementing Work Packages/Inspection plans, Receipt Inspections.
Conduct Quality Assurance compliance audits of materials. Conducting training& assessment for Contractor’s Site QA/QCs.
Coordination with FW engineering and Contractor for any field engineering issues. Apply sound systematic problem-solving methodologies in identifying, prioritizing, Communicating, and resolving construction quality issues
Preparation of weekly report and attending weekly QA/QC meetings with contractor.
Reviewing MC packs and handing over packages (QC Dossiers).
Attend pre-commissioning and commissioning tests.
Dar Al Riyadh Engineering - Yanbu
Job Title: Sr. E&I Inspection Engineer
May’2014 to April’2016
Worked for Client: - Saudi Aramco Exxon Mobil Refinery (SAMREF), Yanbu.
Project: - Tail Gas Clean-Up Project (TGCU).
Duties and responsibilities:-
Fully in charge for Electrical & Instrumentation Inspections, Testing and commissioning of all Electrical equipment’s including from substations, Switchgear panels (MV/LV), Transformers,all motors, Rotary feeders, VFDs and complete plant lighting and Grounding systems, Key activities:-
Attend all witness Inspections based on daily RINs and ensures all installation meets Project specification/ International standards.
Ensure all the materials delivered meets project requirements/Specification/standards. Coordination with engineering and vendor for ensuring materials authenticity, if needed.
Attend pre-installation checks, tests and calibration of material (cables, switchgears, transmitters, etc.).
Issuing NCRs (Non-conformance report) and CARs (Corrective action reports) to contractor.
Conducting training& assessment for Contractor’s Site QA/QCs.
Coordination with FW engineering and Contractor for any field engineering issues.
Preparation of weekly report and attending weekly QA/QC meetings with contractor.
Reviewing MC packs and handing over packages (QC Dossiers).
Reviewing ITPs, material submittals and Method statements
Attend pre-commissioning and commissioning tests.
Preparation of weekly quality reports and attending meeting with EPC contractor.
Dar Al Riyadh Engineering - Yanbu
Job Title: QA Electrical Engineer
February’2013 to May’2014
Worked for Client: - Saudi Aramco Exxon Mobil Refinery (SAMREF), Yanbu.
Project: - Clean Fuels Project (CFP)
Worked as QA in the project for SAMREF Project Management Team (PMT) and mainly involved in coordination with EPC for all the inspections, Testing and commissioning to ensure all installations meet project requirements, Key activities:-
Reviewing ITPs & Method statements.
Attending & reviewing inspections with EPC contractor (Worley parsons AL).
Reviewing MC packs and handing over packages (QC Dossiers).
Conducting training& assessment for Contractor’s Site QA/QCs.
Attend pre-commissioning and commissioning tests.
Coordination with EPC contractor’s engineering department for any issues.
Attending Turn-over walk downs.
Preparation of weekly quality reports and attending meeting with EPC contractor.
Meinhardt(Singapore) PTE LTD, Dubai
Job Title: Project Engineer-Electrical
August’2011to Jan’2013
Key Responsibilities:-
Responsible for the planning and detailed design of electrical system for various commercial and industrial projects.
Regular meeting with Client, Architects, Construction Managers and other engineering trades for coordination purpose of project.
Responsible For review, evaluation and approval of contractors shop drawings and submittal
Attend pre-bid meeting with Clients, Construction Manager and Prospective Contractors.
Projects involving in relation to position:-
University of Bahrain: - Electrical and auxiliary systems design.
The Dubai Mall, Dubai: - Design of the LV network system for new tenants in Dubai Mall.
The Galleria, Sowwah Square, Abu Dhabi: - worked as independent handing over agent for the project.
SNC Lavalin-Worley parsons JV, Abu Dhabi
Job Title: Electrical Engineer
August’2008 to July’2011
Project: - Emirates Aluminum Smelter Complex (EMAL), Al Taweelah, Abu Dhabi.
•Primary interfacing with project management on matters relating to development of engineering progress, quality, scope and schedule.
Coordinate with contractors and sub-contractors and assist and direct them to the work towards timely completion as per client’s specification, schedule and safety standards.
•Assessment of deliverable needs, preparation of engineering schedule and estimation of design engineering man hours for the projects.
•Experience in the following engineering and design deliverables,
-MV&LV power distribution systems
-Sizing calculation of electrical equipments like transformers, switchgear, diesel generators, AC & DC UPS, cables, lighting, grounding etc.
-Load flow, short circuit and motor start up studies, protection coordination and arc flash studies using ETAP.
-Substation layout, cable route layout, hazardous area classification layout, earthing and lightning layout, lighting layout, fire alarm and communication system.
•Actively pursue the application and evaluation of new technology in order to optimize future developments in terms of cost, operability, maintenance and safety.
•Propose/review design solutions, prepare/review data sheets, perform/review bid evaluations and advise on electrical portion of the work.
•Review package/skid vendor drawings for E&I interface. Revise P&IDs as per the new changes to E&I portion.
•To give support to other discipline engineers and approve their electrical documents.
Al Naboodah Engineering LLC, Dubai
Job Title: Electrical Engineer
July’2006 to July’2008
Have done various projects with Al Naboodah for residential, commercial and industrial facilities at Dubai and Abu Dhabi. Key role briefed below in general.
Monitoring and controlling site activities based on scheduled programme.
Checking shop drawing prior to consultant’s submission and work implementation.
Planning and scheduling work force and material by considering time and cost constraints.
Regular meeting with EPC Construction team and other discipline engineering trades for coordination purpose of project.
Coordinating with subcontractors for installation of Building management system and fire detection system in the project.
Preparing:
-Site inspection and material inspection requests.
-RFIs(Request for Information) to clear details in drawing & specification from EPC.
-Material submittal and method statement to the project Specification.
-Shop drawings with aid of the auto CAD operators.
-As built drawings and maintenance and operation manuals for the client.
Projects: -
LA VILLE CONTEMPORAINE BUSINESS BAY PHASES 1 &2 INFRASTRUCTURE WORKS, PACKAGE 2, Dubai:- An Infrastructure project consisting of two service tunnels (each is having 5 ways and 250m long), two irrigation and fire pumping stations including installation of DEWA’s &DM’s SCADA equipments.
Emirates Aluminum Smelter Complex (EMAL), Al Taweelah, Abu Dhabi: - Electro-mechanical works for GIS substation and 16 area substations in the EMAL project. Earth testing (GPR testing, step&touch method) of installed equipotential earth grid for all the 16substation including GIS Substation in the project. Also installed street lighting for the full plant.
Engineers Office(EO) 1361 Ware house Project at Nad al Sheba, Dubai:- A commercial project that consisted of five warehouses, Services buildings and staff accommodation building, of total Power consumption of 7.5MVA.
Etihad Airways office tower at Abu Dhabi: - Modification of Electrical room to comply comments and requirement of local authority and installation of additional HVAC units.
ACADEMIC BACKGROUNDS
Bachelors Degree in Electrical & Electronics Engineering From Mahatma Gandhi university (Kerala) 2006,
Plus-Two from MMMHSS Kuttayi, Malappuram (Kerala) 2002,
SSLC from KHMHSS TIRUR, Malappuram (Kerala) 2000.
CERTIFICATIONS, TRAINING AND ACHIVEMENTS
Certified Electrical Engineer by Saudi Council of Engineers (SCE).[M No.157494]
Registered member in IET (The Institution of Engineering and Technology, UK). [R.No. 110*******]. Currently preparing for incorporated engineering certification.
Recognized and awarded by Project management (SAMREF) for commitment in construction/inspection activities and safety, in the project.
Lock out Tag out (LOTO) training.
Incident and injury free (IIF) and Permit to work system (PTW).
PERSONAL VITAE
Age & Date of Birth : 34,5th August, 1984.
Permanent Address : Puthiyakath kinettingal house,Mangalam (P O),
Malappuram-, Kerala, India-676561.
Passport No. : P0374701 (Expiry on 17/09/2026).
Nationality : Indian.
Marital Status : Married.
Driving license : Holding valid Indian, UAE & Saudi driving licenses.
I hereby declare that the above furnished information is true to the best of my knowledge and believes.
Ismail P.K
Contact this candidate