Engineer Design
Resume:
CURRICULUM VITAE (CV)
*. Proposed Position: QA/QC Expert
2. Name of Firm Proposing the Key Staff:
3. Name of Staff: Festim BUZRA
4. Profession: Civil Engineer
5. Date of Birth: 17/01/1987
6. Years with Firm: 0
7. Nationality: Albanian
8. Membership in Professional Societies: N/A
Key Qualification
Mr. Buzra has over 9 years of experience in design, Contracting and Consulting Companies. He has been involved in various national and international important projects as Quality Control, Inspector and Civil Engineer, involving construction and consulting engineering works with many different companies. He has many years of experience on Site and Design, as a Civil engineer and Quality Controller, in road/Infrastructure construction, Industrial building, gas pipeline projects, Metro Projects in Qatar etc. He also has extent knowledge on computer software related to project’s needs, as he is very familiar with the most commonly used professional programs such as AutoCAD,AutoCAD Civil 3D,Sap200,Plaxis,Geostructural Analysis,Lpile,Autopipe etc. As a Civil Quality Engineer Mr.Buzra is very familiar with: o Supervision of daily activities as per quality control management plan o Identifying and issuing of Non Conformance Report o Issuing Corrective Actions Reports
o Material Receiving Inspection
o Inspection Report form preparation
o Inspection and Test Plan-follow up
As a Civil Structural Engineer Mr.Buzra is very familiar with: o Structural Design of Reinforced Concrete based on Eurocode 2 and 8 o Structural Design of Piled Foundations
o Structural Design of Elements of Bridges/Viaducts o Structural Design of Steel/Concrete/Glass Reinforced Penstocks o Structural and Geotechnical Design of Earth Dams o Structural Design of Pavement Structures
As he has been part of international projects, he is familiar with Contract Management under FIDIC Specification. 9. Education:
M.Sc. Civil Engineering,Polytechnic University of Tirana, Albania, 2010 10. Employment Record
Period Employing Organization and
Title / Position;
Country Summary of Activities Performed Relevant to the Assignment
2018
-
Present
Dolsar Engineering Inc.Co
Quality Engineer
Type of Employment: Regular
Albania Quality Engineer,
Quantity Controller
Civil Works Inspections
2017
-
2018
Bankers Petroleum LTD.
Civil Works Inspector
Type of Employment: Regular
Albania Civil Inspector,
Civil/Industrial Works Supervisor
Civil Design Engineer
2017
-
2017
SintramAlbavia JV
QA/QC Coordinator
Type of Employment: Full Time
Albania Quality Assurance and Control Engineer.
Coordinator Engineer
2
2015
-
2017
Gener 2sh.p.k
QA/QC Coordinator
Type of Employment: Full Time
Albania
Quality Assurance and Control Engineer.
Coordinator Engineer
2013
-
2015
ADMC International WLL
Site Coordinator Engineer
Type of Employment: Full Time
Qatar
Site Coordinator Civil Engineer
2012
-
2012
Louis Berger
Junior Expert
Type of Employment: Part Time
Albania
Junior Expert
Road Asset Management
Assisting International Consultant in Developing RAMS
2010
-
2013
ICE Sh.p.k
Structural Design Engineer/Drafting
Design
Type of Employment: Full Time
Albania
Structural design Engineer
Part of Structural Design Engineering Team
Reference to prior Work/Assignments that best illustrates capability to handle the assigned tasks Duration: 06/2018 – Present
Employer: Dolsar Engineering Inc.Co
Client: Ministry of Infrastructure and Energy
Position Held: Quality Control and QS Engineer
Assignment/Project: Independent Engineer Services for Milot-Morine Highway Concession Project Description of Duties: Mr. Buzra is in charge of Quality and Quantity Control of Civil works with duties and responsibilities described below:
Arranged Inspectors and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.
Taking care of QA/QC documents of the entire project including certificates, calibration, test results, Inspection requests, issuing non-compliance reports and site.
Checking quality and quantity of civil works as per approved BoQ and Technical Specifications.
Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project. Duration: 06/2017 – 06/2018
Employer: Bankers Petroleum Albania Ltd
Client: Bankers Petroleum Albania Ltd
Position Held: Civil Inspector/Supervisor for Construction Works Assignment/Project: Gathering Pipeline System for Patos-Marinza Oilfield Description of Duties:Mr.Buzra is in charge of office/Site for Supevision works for the pipeline Gathering Systems of Patos- Marinza Oilfield. Drawing different maps and sketches in function of the project.PreparingMethode Statements for Pipeline Construction .Preparing Quality Management Plan and Inspection test plan (ITP). Structural design and calculation of steel industrial building. Duration: 01.2017–06.2017
Employer: AlbaviaSintram JV
Client: ALBANIAN ROAD AUTHORITY
Position Held: QA/QC Coordinator Engineer
Assignment/Project: Construction of the Road Qukes – QafePlloce, Section from 2.9 to 18 km Description of Duties: Mr.Buzra is in charge of Quality Assurance and Control of Civil works with duties and responsibilities described below:
Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.
Carry out inspection and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.
Coordinate with the consultant’s representative and Site En-charge for inspection and meeting about quality problems including closure of Non-Compliance Report. 3
Report to the QA/QC Manager, control and monitor all activities related to Quality Management System.
Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site.
Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project. Duration: 12.2015 –01.2017
Employer: GENER 2 SICILSALDO JV
Client: TRANS ADRIATIC PIPELINE
Position Held: QA/QC Coordinator Engineer
Assignment/Project: Access Road and Bridges in Albania Description of Duties Mr. Buzra is in charge of Quality Assurance and Control of Civil works with duties and responsibilities described below:
Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.
Carry out inspection and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.
Coordinate with the consultant’s representative and Site En-charge for inspection and meeting about quality problems including closure of Non-Compliance Report.
Report to the QA/QC Manager, control and monitor all activities related to Quality Management System.
Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site.
Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project. Duration: 09.2014–09.2015
Employer: ADMC INTERNATIONAL WLL
Client: QATAR RAIL
Position Held: Site Coordinator Engineer
Assignment/Project: Doha Metro Project
Description of Duties: Mr.Buzra is in charge of Site Engineer forStructural and Carpentry Works with duties and responsibilities described below:
Studying the work plan submitted by the Contractor
Inspect Construction Work and assure that it’s done in full accordance with the drawings, technical specifications, bill of quantities and Consultant Requirements.
Ensuring the correct implementation of Structural Works according to Technical Specifications, to designs and quality standards.
Ensuring that Health and Safety Requirements are adopted and followed.
Maintain a filing system for all site memos and instructions, measured quantities of work and materials on site reports and other documents and correspondence to the construction activities.
Monitoring Daily Construction Progress of Site.
Preparing Weekly and Monthly Progress to be Submitted to the Project Manager Duration: 09.2013–09.2014
Employer: ADMC INTERNATIONAL WLL
Client: LUSAIL DEVELOPMENT CITY
Position Held: Site Coordinator Engineer
Assignment/Project: Lusail Development City,Primary Infrastructure, Construction Package 04,Road A1/A6,Southern and Marina Interchange.
Description of Duties: Mr.Buzra is in charge of Site Engineer forStructural and Carpentry Works with duties and responsibilities described below:
Studying the work plan submitted by the Contractor
Inspect Construction Work and assure that it’s done in full accordance with the drawings, technical specifications, bill of quantities and Consultant Requirements.
Ensuring the correct implementation of Structural Works according to Technical Specifications, to designs and quality standards.
Ensuring that Health and Safety Requirements are adopted and followed.
Maintain a filing system for all site memos and instructions, measured quantities of work and materials on site reports and other documents and correspondence to the construction activities. 4
Monitoring Daily Construction Progress of Site.
Preparing Weekly and Monthly Progress to be Submitted to the Project Manager Duration: 12.2012 – 08.2013
Employer: ICE& AECOM
Client: TEODORI 2000
Position Held: Civil/Structural Design Engineer
Assignment/Project: Feasibility Study of Hydropower Plant of Zall-Bulqiza Description of Duties: Mr.Buzra is in charge of the structural design elements of Penstock as described below:
Structural Design and Calculation of steel pipe
Structural Design and Calculation of glass reinforced pipe
Structural Design of anchor blocks
Structural Design of saddles
Preparing bill of quantities technical reports and technical specification Duration: 04.2012 – 12.2012
Employer: ICE& AECOM
Client: TEODORI 2000
Position Held: Civil/Structural Design Engineer
Assignment/Project: Detailed Design of Hydropower Plant of Ternova Description of Duties: Mr.Buzra is in charge of the structural design elements of Penstock and Dam as described below:
Modelling of penstock using AutoPipe Software
Structural Design and Calculation of steel pipe
Structural Design and Calculation of ductile iron pipe
Structural Design and Calculation of glass reinforced pipe
Structural Design of anchor blocks
Structural Design of saddles
Structural Preparing Bill of Quantities
Preparing technical reports and technical specification.
Slope Stability analysis using GeoSlope Software
Slope Stability under seismic action using GeoSlope Software
Seepage analysis using GeoSlope Software
Duration: 01.2012 – 04.2012
Employer: Louis Berger &ICE
Client: Ministry of Public Works and Transport
Position Held: Junior Expert
Assignment/Project: Project: Short time Junior Expert and Assistant in the Technical Assistance to the Ministry of Public Works and Transport
Description of Duties: Mr.Buzra is in charge of Junior Expert and Assistant of International Consultant,the main activities durinh this assignment are described below:
Preparing Map for investments for the Core Network of Roads
Analysis of survey sheets from Baseline Survey Data
Automatic Calculation of interventions for each of Roads from Baseline Survey data
Preparing Technical Specifications for each of Interventions that are used for Maintenance Backlog Programme
Preparing Maintenance Backlog Programme part of Road Asset Management System
Road Asset Management System
Bridge Asset Management System
Baseline Survey in all National Roads Network in Albania
Highway Performance Monitoring System etc
Duration: 01.2011 – 12.2011
Employer: ICE& GEOSAT
Client: GENERAL ROADS DIRECTORATE
Position Held: Civil/Structural Design Engineer
Assignment/Project: Detailed Design of the Motorway: Tirana Elbasan (Section Ibe - Elbasan) Description of Duties: Mr.Buzra is in charge of the structural design elements of Road/Bridges and Viaducts as described below:
5
Responsible for structures especially for substructures.
Structural Design of structures such as: Spread foundation, reinforced concrete piled foundation(15m length of pile) an
Structural Design of minor structures such as: Retaining walls, Cantilever walls, Pipe Culvert, Box Culvert, approach Slab etc. The structures above are calculated using these software:SAP2000, Geo 5, CYPE 2011,Esoft..
Preparing bill of quantities
Preparing technical reports and technical specification Duration: 09.2010 – 01.2011
Employer: ICE
Client: GENERAL ROADS DIRECTORATE
Position Held: Civil/Structural Design Engineer
Assignment/Project: Detailed Design of the Secondary Road Porocan,Gramshi Area Description of Duties: Mr.Buzra is in charge of the structural design elements of Road and pavement as described below:
• Responsible for substructures and Road Pavement.
• Structural Design of structures such as: Spread foundation,
• Structural Design of minor structures such as: Retaining walls, Cantilever walls, Pipe Culvert, Box Culvert, approach Slab etc. The structures above are calculated using these software:SAP2000, Geo 5,Esoft.Design of Pavement Structure and Road Layers.
• Preparing bill of quantities
• Preparing technical reports and technical specification 11. Language Skills:
Speaking Reading Writing
Albanian Mother tongue
English Very Good Excellent Very Good
Contact this candidate