RaniloTantayRodrin

Personal

Information

Marital Status: Married

Nationality: Filipino

Date of Birth: April 22, 1975

Place of Birth: Cavite City, Philippines

WorkExperiences March 2015 ~ March 2017 Arabian Technical Services Co. L.L.C. Doha, Qatar Health, Safety and Environment Officer

Perform daily observation report, good practices act, near miss or unsafe acts or conditions, accident or incident investigations if any within the designated and assigned area.

Enforce company policies and procedures based on Qatar Construction Specifications (QCS 2014), and other applicable safety and health regulations and standards.

Ensure each employee or worker will undergo safety trainings thru site induction before deployment to work, attend weekly tool box talk and daily STARRT card

(safety task analysis risk reduction talk) and other alert notice from management.

Observe start up of particular activity if required, work in progress and make sure safety equipment is worn, used, maintained, stored in adherence to the procedures and policies of the company.

Check and assure required permits are issued to concerned personnel such as excavation, lifting, working at heights, hotworks and coldworks, general maintenance and closeout the permit base on declared period of time.

Generate suggestions for corrective actions, follow-up to rectify violations and alerts management and workers about the changes if there is any then monitors compliance.

Analyze hazards, solicit inputs and develop risk assessments to direct and sub- contractual employees as part of basic requirement before the commencement of a particular activity.

Jan 2011 ~ May 2013 New Products Industries Co. Ltd. Jeddah, KSA QualityAssuranceCustomerService/Technical Support

Attend to customer requests for data sheets, certificates, technical assistance and special product samples.

Investigate customer complaints and write inspection report including corrective action. Monitor and follow up implementation of corrective action.

Control the distribution, filing and issuance of all controlled documents. Create and maintain company quality documentation, including quality manuals, procedures, etc.

Review and update regularly NEPROPLAST Inspection Test Plan (ITP) and procedure manuals.

Ensures that all ISO 9001 Quality System requirements are implemented 25 Zepeda St.,

Caridad,

Cavite City,

Philippines

4100

Residence:

(006*-**-***-****

Mobile:

(0063)956-***-****

E-mail:

ac8v6t@r.postjobfree.com

correctly on time.

Interface with technical and production specialists to ensure transfer of new products or changes to specifications to production is in accordance with relevant approved standards and specifications.

Support Quality Inspectors to ensure that products and processes comply with the relevant requirements of Quality Management System.

Continuously improve QA procedures for goods receiving inspection process. Aug 2008 ~ Aug 2010 Arabian Pipes Company Jubail, KSA QualityAssuranceAnalyst

Document control (procedures, work instructions, forms, distribution/change records, standard copies of references related to work, etc.

Generate, provide, filing of inspection test plan (ITP), manufacturing procedure specification (MPS), quality plan (QP), manufacturing procedure qualification

(MPQ) for every pipe project.

Assists Quality Manager in completing non material requirements inquired by customers.

QualityAssuranceInspector

Pipe visual inspector – Level 2 certified

Penetrant test inspector – Level 2 certified

Provides visual inspection on base metal, weld and repair on pipe production. July 2006 ~ Aug 2008 American Power Conversion Cavite, Philippines QualityControlTechnician-Outsource

Provides assistance in carrying out ultimate objective of QA through implementation and maintenance of quality.

Serves as coordinator with regards to customer claims received from counterparts in other APC facilities for both local, abroad and APC subcontract companies,

(P-IMES Corp., International Precision Inc., Danam Inc.)

Assists QA/QC Engineers in follow up and submission of reports in writing on the effectiveness of the corrective action taken in resolving quality issues in subcontract companies.

Coordinates with Platform and Manufacturing Engineers regarding source materials related issues, problem simulation and reliability evaluation occurred in subcontract companies.

Coordinates with Qualification Engineers regarding evaluation and approval of materials for parts qualification requests.

Coordinates with Manufacturing Engineers and Production Supervisors from subcontract companies for the implementation and control of engineering orders and process changes.

May 2004 ~ July 2006 American Power Conversion Cavite, Philippines QualityControlTechnician–TeamLeader

Coordinates with APC Japan Engineering Support as team leader of quality inspectors for production line exclusively running for Japan bound products.

Receives, head starts a meeting to concerned departments and formulate corrective actions for every complaint received from APC Japan team.

Acts as Quality Supervisor in absence of Quality Engineer to handle all quality related issues and concerns.

Elevated as quality team leader for Japan Quality Inspectors and later on team leader for whole QC section for APC Cavite 2 facility.

Sent to APC Suzhou facility in China to provide extension services related to the function and product inspection establishment.

Oct 2000 ~ May 2004 American Power Conversion Cavite, Philippines QualityControlTechnician

Performs process inspection, incoming inspection and out of the box (OOB) inspection including bench tests (functional, high potential, load application) and mechanical teardown inspection.

Performs material inspection of newly delivered/incoming parts and submit inspection report analysis.

Investigates, determine root cause, resolve quality issues and platform evaluation in production within minimum supervision.

Review disposition and initiate corrective actions related to material rejected by production.

Performs, verifies and calibrates torque drivers.

Records and maintain files on quality defects in assembly process and feedback to the department concerned.

Assists documentation clerk in consolidating quality records.

Assists MRB coordinator in executing material review and supplier audits. Education June 3, 2013 ~ June 24, 2013 Makati City, Philippines Safety Officer Training Course for Construction, Petrochemical and Oil & Gas Industries (Onshore and Offshore Endorsement) RODECH Training Services Link International Incorporated Note: Completing the course as top 1 in class

June 1992 ~ April 1993 Manila, Philippines

Systems Technology Institute College

Computer Technology - 6months(undergraduate)

June 1988 ~ April 1992 Cavite City, Philippines

Cavite National High School

SecondaryDiploma-High School graduate

Certifications and

Licenses

Lfting Supervisor (in accordance with British Standard 7121) Certificate Number: VC0232016345

Validity: November 7, 2016 ~ November 6, 2019

HABC Level 2 International Award in Emergency First-Aid at Work Certificate Number: FA1067260 Date of Award: October 16, 2016 Nebosh Award in Health and Safety at Work

HSW 1 - Workplace safety foundations

HSW 2 - Risk assessment activity

Confirmed date: February 16, 2016

OSHA Institute for Safety Professionals

Registration Number: 34-600******

Membership Date: June 30, 2013

International Association of Safety Professionals (IASP) - Philippines Professional Member, RODECH Philippine Chapter

RODECH INC./IASP 03229

Performance and Productivity Improvement Seminar

Practitioner Registration Card No. 5302 Valid until: May 30, 2012 American Society for Non-destructive Testing

Visual Inspection – Level II Certified Validity: May, 2009 ~ May, 2012 American Society for Non-destructive Testing

Penetrant Testing – Level II Certified Validity: May, 2009 ~ May, 2012 IPC-A-610D Acceptance of Electronic Assemblies

License No. 610DS 101365

Validity: February 28, 2006 ~ February 28, 2008

Trainings and

Seminars

October 29~31, 2016 Vibrant Consultancy W.L.L. Doha, Qatar Lifting Supervisory Training (British Standard 7121) October 16, 2016 Vibrant Consultancy W.L.L. Doha, Qatar HABC Level 2 International Award in Emergency First-Aid at Work August 14, 21, 28, 2015 Integral Training and Development Doha, Qatar Nebosh Award in Health and Safety at Work

HSW1 - Workplace Safety Foundations

HSW2 - Risk Assessment Activity

March 16~17, 2013 New Products Industries Co. Ltd. Jeddah, KSA Effective Time Management Training Course

January 15~19, 2012 New Products Industries Co. Ltd. Jeddah, KSA Internal Quality Audit Training Course – ISO 9001: 2008 May 16~June 1, 2011 New Products Industries Co. Ltd. Jeddah, KSA Performance and Productivity Improvement Seminar

May, 2009 Arabian Pipes Company Jubail, KSA

ASNT – Visual Inspection Level 2 Training

May, 2009 Arabian Pipes Company Jubail, KSA

ASNT – Penetrant Testing Level 2 Training

April 8~10, 2008 APC Administration Bldg. Cavite, Philippines 7 Steps Methodology Training

July 4~5, 2007 APC Administration Bldg. Cavite, Philippines QualityManagementSystem

June 29~30, 2007 rr APC Administration Bldg. Cavite, Philippines FailureModeandEffectsAnalysis(FMEA)

March 30~31, 2006 American Power Conversion Cavite, Philippines Leadership Fundamentals 1 – Basic Supervisory

March 26~28, 2006 American Power Conversion Cavite, Philippines IPC-A-610DAcceptanceofElectronicAssemblies

July 21~22, 2004 American Power Conversion Cavite, Philippines ISO 9001: 2000 Auditors Training

Competence and

Activities

Work Activities Years of Experience Remarks

Visual Inspection

Of Electronic Assemblies 8 Certified Specialist

Audit, Methodologies and

Supervisory oriented 10 Work experience

MS Office End User 16 Work experience

Visual Inspection of

Metal, Plastic Pipes 4 Work Experience

Proficiency 1. Pace Rating Competence / Process Analysis by Time Study 2. Emergency First-Aid at Work

3. Design of Experiments (DoE)

4. Failure Mode and Effects Analysis (FMEA)

5. 7 Steps Methodology

6. Risk Assessment at Workplace

7. Lifting Operations

Languages Filipino (oral and written), English (oral and written), Arabic (oral) Community

Activity

Sangguniang Kabataan Chairman (1993~1997) (Youth Community Council) Barangay 49-A, San Antonio, Cavite City, Philippines References Available upon request

Personal Data SSS No. – 04-3008446-3

TIN No. - 199-533-762

Passport No. - P7600870A

Date of Issuance - June 20, 2018

Date of Expiration – June 19, 2028

Place of Issuance - Manila, Philippines

I under signed that all information written are accurate and to the best of my knowledge.

2018

Ranilo T. Rodrin

Contact this candidate