Sarah Adel N. Bert Hanna, PMP

** ***** **-*** **-Zahabi St,Ard El-Golf, Cairo, Egypt

Telephone: +202-******** Cell Phone: +201********* Email: ac8tjx@r.postjobfree.com

SUMMARY:

Mechanical engineer having Bachelor degree in Mechanical Engineering with experience in estimating, designing, performing shop drawings, procurement and quality control for various mechanical systems including HVAC, water piping, drainage piping, compressed air system and pump stations of residential and commercial buildings according to American Codes & Standards,having experience in AutoCAD & Revit MEP and Project Management Professional (PMP) and Fundamental of Engineering (FE) Certified. WORK EXPERIENCE:

CONSOLIDATED CONTRACTORS COMPANY

SENIOR ESTIMATION MECHANICAL ENGINEER, NOVEMBER 2018-PRESENT Responsibilities:

• Study the scope of work & tender documents and prepare the tender review sheets

• Create the estimation BOQ and link it with the client BOQ.

• Prepare & send out RFQ for (materials, vendors & subcontractors), follow-up, prepare technical evaluation sheet, send & acquire responses and compliance sheets to prepare quotation comparison sheet to advise the best quotation on basis of the technical proposals submitted, compliance to scope of work and delivery period of long lead items.

• Prepare detailed estimates for different projects.

• Study the tender drawings/bulletins/clarification responses from client and reflect the same to suppliers/vendors/subcontractors to get the offers as per final & revised information from client.

• Prepare the tender cost estimation, such as man-hour estimates, materials, construction equipment...etc .

• Assist project management and contracting personnel with bid analysis and contract negotiations.

AECOM / MICHAEL BAKER INTL.

SENIOR MECHANICAL ENGINEER, AUGUST 2015 – APRIL 2017. Project Overview:

The project is for renovation of biomedical research facilities for the US Naval Medical research unit NAMRU-3 under the supervision of the U.S. Army Corps of Engineer (COE). Responsibilities:

• Initiating & reviewing mechanical submittals for biomedical equipment and systems

(cage wash, air shower, HTP, lab equipment,..etc) .

• Initiating Mechanical submittals &shop drawings for HVAC, gas and plumbing systems.

• Initiating specifications for purchase of materials and biomedical equipment.

• Follow up the procurement process for the biomedical equipment and material with vendors (cagewash, air shower, HTP, lab equipment,..etc) .

• Review mechanical Shop Drawings, Reports, Bill of Quantities issued by subcontractor located in the US to ensure compliance with the scope of work, specifications and contract drawings.

• Recommending design modifications to eliminate system malfunctions.

• Attend technical meetings with client, design consultants and material suppliers.

• Coordinating between existing site conditions and new customer requirements.

• Coordinating mechanical shop drawings with other disciplines.

• Following up with the site foremen and labors to provide them with technical support.

• Site visits on daily bases to follow up the work progress and quality. 2

• Initiating RFIs (Request for information).

• Preparing Equipment Operations and Maintenance Manuals for Biomedical equipment and systems including the preventive and corrective maintenance plans and the overall periodic maintenance plans for each equipment and the troubleshooting and resolving of system malfunction.

• Initiating framed instructions for mechanical systems.

• Using RMS (Resident Management System) / QCS (Quality Control System) which is designated as U.S Army Corps of Engineers Standard construction management information and contract administration system.

DMG (DESIGN AND PROJECT MANAGEMENT GROUP)

MECHANICAL ENGINEER, DECEMBER 2014 – JULY 2015.

Project Overview:

DMG is an Electro-Mechanical Contractor for various construction companies including OCI, Al Dau Heights, Alcazar.

Responsibilities:

• Designing HVAC system (including load calculation using HAP (hourly analysis

• program), duct calculation, fan sizing, .etc.)

• Designing plumbing systems, compressed air system and firefighting systems.

• Review the mechanical submittals issued by subcontractor to ensure compliance with the scope of work, specifications and project requirements.

• Attend technical meetings with client team and construction subcontract.

• Coordinating between existing site conditions and new customer requirements.

• Coordinating mechanical shop drawings with other disciplines. URS/CONTRACK- PACER FORGE JOINT VENTURE (FORMERLY WASHINGTON/CONTRACK) TECHNICAL OFFICE MECHANICAL ENGINEER/COORDINATOR,JULY 2010 – JUNE 2014 Project Overview:

The project is for design and construction of new buildings and renovation of existing Facilities for the Egyptian Air Force Bases under the supervision of the U.S. Army Corps of Engineering (COE).

Responsibilities:

• Designing HVAC system (including load calculation using HAP (hourly analysis program), duct calculation, fan sizing, .etc.).

• Designing plumbing systems (including pump sizing, pipe sizing...etc) and compressed air system.

• Initiating detailed shop drawings and sketches for mechanical installation details.

• Performing rough order magnitude and definite estimates of various mechanical works for upgraded or new facilities.

• Initiating submittals, material technical data sheets and comparing various material specifications to the Unified Facilities Guide Specifications (UFGS).

• Evaluating technical and commercial offers from suppliers and subcontractors.

• Initiating Framed Instruction for Mechanical Sys. & sequence of operation for systems.

• Initiating Equipment Operation &Maintenance Manuals for equipment and systems and preparing the maintenance schedules and check lists required for preventive,corrective and overall periodic maintenance required as per manufacturer representative .

• Coordination with different trades (civil, architectural and electrical).

• Preparing specification for purchase of materials and equipment.

• Review mechanical submittal and Bill of Quantities issued by subcontractor located in the US to ensure compliance with scope of work, specifications and contract drawings.

• Initiating RFIs (Request for information).

• Performing preliminary and final tests for mechanical systems and equipment.

• Using RMS (Resident Management System) / QCS (Quality Control System) which is designated as U.S Army Corps of Engineers Standard construction management information and contract administration system.

3

EDUCATION

AIN SHAMS UNIVERSITY, FACULTY OF ENGINEERING, Cairo, Egypt. B.Sc. Mechanical Engineering, 2009. Major : Mechatronics General Grade : Fair Graduation Project : Visual Inspection Robot :Distinction ST.JOSEPH'S SCHOOL, Heliopolis, Cairo,Egypt

High School Education Certificate, 2004. Grade: 95.5% COURSES AND CERTIFICATES

• Project Management Professional (PMP) Certified, 2018.

• Fundamentals of Engineering (FE) Certified, 2010.

• Revit MEP, 2017.

• Load Estimation and HAP professional calculation, 2012.

• HVAC Water System Design, 2010.

• HVAC Air System Design, 2011.

• Microcontroller PLC, 2009.

• Matlab, 2007.

• Inventor, 2006.

CODES AND STANDARDS

• National Fire Protection Code (NFPA).

• Unified Facilities Guide Specifications (UFGS).

• Corps of Engineering (COE) Specs.

• American Society of Heating, Refrigerating and Air Conditioning Engineers

(ASHRAE)

• Standards,

• National Standard Plumbing Code (NPC),

• American Society for Testing and Materials (ASTM) Standards.

• The Sheet Metal and Air Conditioning Contractors' National Association (SMACNA).

• Unified Facilities Criteria (UFC).

COMPUTER SKILLS

• AutoCAD.

• Revit MEP.

• MS office.

• HAP.

LANGUAGE

• Arabic: mother tongue.

• English: Fluent in both spoken and written.

• French: Good in both spoken and written.

• German: Good in both spoken and written.

INTERPERSONAL SKILLS

• Work under pressure.

• Very well organized.

• Self-motivated.

• Quick Learner.

• Enjoy learning new skills and gain more experience.

• Always try to get results, meet deadlines and always set goals for myself and try to meet them.

4

EXTRACURRICULAR ACTIVITIES

• Ability to lead small kids.

• Leading a group of 20 youth for preparing weekly meetings, summer programs, sports days and group discussions.

• Preparing summer camps.

• Member of a scout group.

• Travelling, camping, swimming, fashion and playing violin. GENERAL INFORMATION

• Birth date: February 17, 1986.

• Marital Status: Single.

• Nationality: Egyptian

References furnished upon request

Contact this candidate