Trieu Lam

**** **** *******.

San-Jose, CA *****

916-***-****

Email: ac8ewq@r.postjobfree.com

Objective: Seeking to obtain a challenging and responsible position as a Technical Support

Engineering-Manufacturing-R&D in the field of electronics and Systems.

Experiences: Champ Tech & Honkey Tech LTD.

09/18-Present System Engineer Projects.

Semiconductor Equipment Engineer Support-Installation-PM and troubleshooting.

PCB Controller Layout and designed. And Create new PCB-Decals Library using Power-PCB.

Interface with new replacement components.

Customer Services and systems training.

PCB system function Test Engineer.

04/18-09/18 Google Inc. 100 Mayfield Ave. Mountain View, CA 94043.

LAB Senior Engineer-Tech.

Research and Development Wing Project.

Built and test function test Drone-Aircraft.

Built and test Drone-Aircraft Mainframe Harness.

Built Complete and test Avionics Controller of Drone-Aircraft.

Engineer ECO Modification PCB Controller.

Complete Drone-Aircraft QA-Inspection.

Complete Drone-Aircraft End to End testing.

Solder all super small SMT component such as 0201 and up to and more than 100 pin fine pitch IC’s.

Work and Support direct all Electro-Mechanical Engineering Design Team.

Drone-Aircraft Software setup-Download to all Electronics Modules.

Drone-Aircraft Camera calibration.

11/17-04/18 Kateeva Inc., 7015 Gateway Blvd, Newark, CA 94560

LAB Senior System Engineering Tech.

Built and test entire OLED Display Inkjet Printer for Cell Phone and OLED-TV.

Built and test individual modules Harness.

Built and test Chiller System.

Install and setup Transport-station Robot Cluster Tool.

Complete built and test PLC-Controller Systems.

Mechanical Sub-Assembly and calibration.

Small SMT PCB Modification.

04/17-11/17 Lam Research Corporation.

Electro-Mechanical Engineer Support.

Working in Pilot Engineering R&D Lab Department for all Etch Systems.

Work with ME-EE- Engineers for all new Sequence Of Events Procedures.

Support all new Engineering Systems upgraded for customers such as Intel, Samsung, Toshiba.

Support Building the new Etch BIAS Chamber prototypes System.

Support Building the new Etch Position Module prototypes Systems.

Systems new change for Electrical Wiring and Engineering test.

Built new change of Engineering prototypes Mechanical Sub-Assembly.

Support all Design Electrical-Mechanical Engineers for the new Etch products.

Communicates on all Technical issues and troubleshoot as well to support designed engineers.

12/13-04/17: R-TECH-LLC. 1000 Landmark Cir, Lincoln, CA 95648.

In charge for all pcb Controller and Interface of Semiconductor and Solar Equipment systems.

Re-built and refurbish photolithography semiconductor Equipment for wafer processing such as SVG-Coater-RF Ultrasonic Vibration Developer-Cleaner. SOG & Stripper, Applied Material.

Systems Linear of Robot and System Conveyor Belts install and fully calibration.

Domestic and International Filed Service Engineer for system installation and customer training.

In charge all oversea customers for all spare parts operated.

Supporting Hardware-Software Engineering of the new products designed-modification and debug prototypes.

Supporting Equipment-Engineer on the test of all pcb and systems troubleshooting.

Implementation of all obsoleted electronics-electrical controller and component parts.

Built all Electronics and Mechanical Test Fixture.

R&D report, Document Control and writing all test procedures.

Contact vendor for all new electrical-Electronics-Mechanical Engineering parts request.

Create Schematics Circuits PCB Layout-and built completed Prototypes Boards using Pad PCB

And PAD-Logic.

Built and designed new variety complex of cable Harness-Main Frame.

Built and designed different types of new cable for system-Individual-Modules.

Built variety prototypes and troubleshoot AC-DC/DC-DC for system and on board Power Supply.

Troubleshooting PCB down to component level. And skill with all through holes and SMT Soldering.

Completed rebuilt and test transducer f the Photoresist chemical pump.

Generate Systems-Sub-Modules and PCB Controller Test procedures.

Experiences daily tools: Spin-Speed digital, Oscilloscope, DVM, Temperature Measurement. Microscope.

Machine shop tools: Stand Drill Press, Mill machine and Lath.

08/01-12/13 More Technology Services, Inc. 115 Phelan Ave, San-Jose, CA 95112.

Electro-Mechanical Manufacturing Support Engineering.

Supporting Hardware-Software-Mechanical Engineers for semiconductor equipment of the photo Coating-Developing-Cleaning for wafer processing of the new products of Semiconductor.

Domestic-International Filed Service systems installation-Training.

Supporting and Servicing SVG and Rite Track production for Photo Coater-Developer and Cleaning

of the Semiconductor Equipment Systems of the wafer processing.

In charge and Supervisor for production of the building testing modules sub-assembly and systems.

In charge and Supervisor Electronics-Electrical of the pcb products for Technician group.

In charge and Supervisor for Field-Service Engineer Group.

Implementation of all obsoleted electronics-electrical controller and parts.

Supervising on the semiconductor and solar systems refurbished.

06/98-08/01 Maxim Integrated. 120 San Gabriel Drive, Sunnyvale CA 94086.

R & D IC’s Design Center Support Engineering.

Create new Engineer Schematic Circuit for each new IC designed.

Create new Engineer PCB layout for each new IC designed.

Building all new prototypes and test fixture for testing of all new IC products designed.

Engineering ECO of all IC designed and documentation control.

Supporting a groups of PHD and Senior Master IC Design of the new products.

Testing and Data recording of each new RF-IC’s devices, Analog-Devices prototypes.

05/97-06/98 Go Digital Telecommunications, Inc. 41652 Boscell Rd, Fremont, CA 94538

R & D Technical Support Engineering.

Built and Support Telephone line of system prototypes and completed system burn in and test.

Built and debugged new pcb prototypes of the Telephone Line-Card.

Completed System testing.

Create completed Engineering Schematics capture and ECO.

PCB Layout designed for all products Fabrication and ECO.

Engineering ECO and completed Documentation for each System products.

03/95-05/97 Advanced Control Enterprises. 46731 Fremont Blvd., Fremont, CA 94538.

R & D Technical Support Engineering.

In Advanced System Division . I am responsible for all hardware systems integration of the

new Track Wafer Embedded Systems controller of Semiconductor Prototypes Machines.

Building, testing, debugging and troubleshooting electronics modules and printed circuit boards for all prototyping.

Experiences on SVG Semiconductor Equipment’s Track Wafer Systems.

On Track Double side wafer processing for Scrubber System.

PC Boards Design.

Using OrCAD schematics capture design new schematic and also completed PCB layout

including SMT printed circuits. Generated customs library of both Schematics and PCB.

Assisting Software Engineer Testing all new release of software.

Supervisor.

supervise Mechanical and Electronics Technician in circuit boards testing and system final

Documentation’s, generated the B.O.M and test procedures for system transfer to production line.

Maintain all test fixtures and repair/upgrade PC Products.

06/94-03/95 Bentek Inc., 2150 Del Franco Street, San Jose, CA.

Manufacturing Engineering.

I am responsible for management of test department and assisted engineer on PC board

test fixtures design.

Wire wrap bread board and debug all prototypes consist of Analog and Digital circuitry.

Generating the PC board schematics by using OrCAD software.

Documenting test procedures. Provide customer services and CEO’s request.

Systems and printed circuit boards testing and troubleshooting to the component level.

Hardware and software systems configuration of module controller 80486 AT based.

Other Duties Included.

Manufacturing Supervising of Electro-Mechanical and PC-Board Assembly department.

Using the PCMRP Database program created, supported the manufacturing B.O.M and Job Traveler.

07/92-06/95 TransFRESH Corporation. 3801 D Charter Park CT, San Jose, CA.

Service Center Supervisor.

I am responsible for management of all Service Technician in the testing, troubleshooting

and servicing a system consist of Analog, Digital and microprocessor based Atmospheric

Controller, a device used to control O2 and CO2 gas level in worldwide produce shipment

Trip logs download, using Excel charting data and analysis.

I also created tracking database by using FileMaker Pro MAC and IBM format.

Engineering Associate Supporting.

Assisted engineer in new product prototypes and test fixtures and implementation of test

procedures. Generating and maintaining electro-mechanical drawing and schematics

design by using the ClarisCAD and OrCAD software.

Debug and troubleshooting the circuit board to the component level.

05/90-07/92 The Engineering Department Inc. 120-A Albright Way, Los Gatos, CA.

Manufacturing Supervising.

In charge of manufacturing and test department. Documented test procedures.

Customer services for Kennect Technologies 3.5" and 5.25" disk drive and controller

Interface for Apple Computer products.

Maintaining server and repair all Macintosh computers.

Engineering Supporting.

Worked in LAB. Wire wrapping and debug engineering prototypes.

Usage of troubleshooting software package to and localized system failure problems.

Provided early services and manufacturing support for the TransFRESH Corporation

in July of 1992 for Atmosphere of fruits produce and meat international transportation.

05/89-05/90 Virtual Imaging Inc. 165 San Gabriel Drive, Sunnyvale, CA.

Senior Engineering-Technician.

Systems Final test and systems level troubleshooting of the Medical Imaging and Ultrasonic AT based computer.

Assisted Hardware-Firmware-Software Engineers to Debug and troubleshooting the integrated circuit of RF Analog-Digital Device down to the component Level in the R&D Develop environment.

Generated all testing report and ECO for the document control for all Engineering rework.

Writing all Systems and pcb controller Test procedures.

Ordered new Engineering parts request and building first Engineering prototype.

Excellent for soldering and all SMT-Through holes components removed.

11/88-05/89 Digilog Inc. 1370 Welsh Road, Montgomeryville, PA.

Specialist Support Engineering-Products-Technician.

In charge and operation the Network Control Products line.

Systems final test and PC board level of debug and troubleshooting.

Train Junior Tech in the theory and operation of same.

Assist the Quality Control Manager and Engineering department.

06/85-11/88 Network Control Corp. 34 Backus Ave., Danbury, CT.

Senior R&D Engineering Support-Technician.

Testing, servicing and troubleshooting the Telecommunication based telephone

voice data testing systems. The systems consisted of analog, Digital and Microprocessor.

Assisting and support engineering in the new prototypes products.

Debugging and troubleshooting the prototypes board and provided technical support.

Testing all new firmware. Submit engineering change request and test report.

Daily tools used such as: DVM, Oscilloscope, Logic Analyzer and Signal Generator

This company provided early service and manufacturing support for Digilog Inc. in Nov - 88

and relocated to PA.

Education:

1992-1994 Micro Polytech Institute, CA BSE.E Test Engineer.

Motorola 68000 Assembly Language.

C Programming.

Hardware Design Application.

1985-1988 University Of Bridgeport, CT. BSEE.

1984-1985 Center For Degree Studies, PA Direct Towards ASEE.

1983-1984 Waterbury Technical College, CT AS EngineeringTechnology.

References: Available upon request.

Contact this candidate