Mechanical Engineer Project
Resume:
DENNIS ELIAS M. PLANA, Jr.
Registered Mechanical Engineer (License no.: 0059762)
Brgy. Ungka 2, Pavia Iloilo Phillipines, 5001
Telephone No.: (033-***-****
Mobile No.: +63.912.1882384 (PHI) / +63.907-***-**** (PHI)
E-mail address: ************@*****.***/ SKYPE I.D.: dennisplana1
Passport No. : EC7517086
Passport Validity : April 23 2021
POSITION APPLIED: MECHANICAL/HVAC ENGINEER
PROFESSIONAL EMPLOYMENT HISTORY
1
SANGJEE ENGINEERING & CONSTRUCTION CO. LTD. SENIOR ENGINEER (HVAC)
Suite 206~207, Seoul Soop, Kolon Digital Tower II December 16 2016 ~ December 07 2018
27Seongsui-ro 7-gil, Seongdong-gu,
Seoul South Korea
PROJECTS:
KUWAIT NATIONAL PETROLEUM CO. (KNPC)
MAB-2 PROJECT (Mina Abdullah Refinery)
FDH Joint Venture (Flour Limited, Daewoo Eng’g & Construction Co. Ltd. Hyundai Heavy Industries Co. Ltd)
KUWAIT INTEGRATED PETROLEUM INDUSTRIES COMPANY(KIPIC)
Al-Zour LNG Import Project (LNGI)
HYUNDAI Engineering & Construction
JOB DESCRIPTION:
1.Project Estimation and Costing (including Materials, Equipment and Man-hours) as proposal form and providing detailed job estimate sheet, gathering details to estimate construction materials and cost. Develop competitive bids on a range of inquiries including scope of works.
2.Preparation of Material Technical Submittals and Equipment Schedule as per Project Specification and Qualification, Technical Bid Evaluation (TBE), General Documentation including Factory Acceptance Procedure, Inspection Test Plan etc, Technical Vendor Prints for Main HVAC Equipment including AHU, PAU, EDH, CFU, STB, FANS, TAU, Pumps, HVAC Control Panels and Equipment.
3.Requisition, Review, Preparation of Vendor Prints and Vendor Documents Including Material Data Sheet, General Arrangement Drawings, Power Wiring Diagrams, Motor Data Sheet, HVAC Controls System (Schematic, Wiring Logic, Wiring Plan, IO List & Cable Connection List, Operation Explanation, Instrument Data Sheet) and Submittal to contractors for approval.
4.Preparation and Submittal of Vendor Prints on Project Online (POL) and SECUHARD.
5.Monitoring and follow-up of Material Delivery based on Project Schedule.
REZAYAT COMPANY LTD. MECHANICAL ENGINEER
(CONSTRUCTION/MAINTENANCE DIVISION) September 2014 ~ November 08 2016
P.O. BOX 90, AL-Khobar 31952
Kingdom OF Saudi Arabia
PROJECTS:
ARAMCO-REZAYAT- AL-HASA HEALTH CENTER (ARAMCO HOSPITAL) REVITALIZATION PROJECT
PACKAGE # 1& 2: CONSOLIDATION OF EMS & UCU AND RENOVATE RADIOLOGY, PHYSIOTHERAPY.
PACKAGE #5: RENOVATION OF BLDG. 3, 2nd FLOOR OPERATING ROOM WARDS
PACKAGE #6: RENOVATION OF BLDG. 3, 2nd FLOOR HIGH DEPENDENCY UNITS
PACKAGE #9: RENOVATION OF BLDG. 3, 3RD FLOOR ACUTE CARE UNITS
Al-Hasa, Kingdom of Saudi Arabia.
BASEELAH Mechanical Works CO. HVAC Site Engineer /HVAC Estimator
(HVAC Division, AL-OSAIS CONTRACTING Co.) February 2012 ~ March 2014
P.O. BOX 8275, Dammam 31482
Kingdom of Saudi Arabia
PROJECTS :
ARAMCO-JGC-AL-OSAIS MANIFA (CPF-USSF) CENTRAL PROCESSING FACILITIES PROJECT, UTILITIES, STORAGE, & SHIPPING FACILITIES
Manifa, Kingdom of Saudi Arabia.
ARAMCO- AL-OSAIS MANIFA (ISF) INDUSTRIAL SUPPORT FACILITIES PROJECT
Manifa, Kingdom of Saudi Arabia.
SUPARANA HOLDINGS INC. Plant Engineer /Plant Operator
(Cubao Ice Plant and Cold Storage) May 2006 ~ February 2012
#9 Arayat St., Cubao Quezon City
Philippines.
Red Ribbon Foods Inc. Engineering and Maintenance Staff
Tabucan,Mandurriao Iloilo City, May 2004 ~ September 2004
Phillipines.
La Paz Refrigeration and Aircon Services (LRACS) RAC Installation Foreman/
(Astrologo Refrigeration Services) Cadet Engineer
Jereos St., La Paz,Iloilo City Phillipines. October 2002 to March 2004
ROMAC/COCA-COLA BOTTLERS PHIL. INC. Production Staff/Bottling Crew/ Brgy. Ungka 2 Pavia Iloilo Quality Control Technician
Phillipines. February 2002 to August 2002
EDUCATIONAL QUALIFICATIONS
COLLEGE B.S. in Mechanical Engineering
2001 Western Institute of Technology
La Paz, Iloilo City Philippines
SECONDARY Iloilo National High School
1994 La Paz, Iloilo City Philippines
ELEMENTARY Aganan Ungka, Elementary School
1990 Ungka 1, Pavia Iloilo Philippines
LICENSURE AND EXAMINATIONS
Registered Mechanical Engineer
Professional Regulations Commission
Board of Mechanical Engineering
Registration Date: November 23, 2001
License no.: 0059762
PROFESSIONAL AND TECHNICAL CAPABILITIES
Preparation of all Technical Material Submittals as per Project Specification and Standards.
Knowledge in Elite Software for HVAC Design and computation.
Knowledge in McQuay Duct Sizer and Pipe Sizer software.
Prepares (RFI) Request for Inspection Documents prior to Actual Inspection with ARAMCO Inspection Department.
Coordination with ARAMCO Project Management (PMT) reports daily activities project progress.
Knowledge on Installation of all utilities including Waterline System, DWV (Drain, Waste, Vent).
Knowledge on Installation of Fire Protection System (Fire Water Piping Lay-out, Sprinkler System.
Knowledge on Installation of Medical Gas System.
Knowledge on HVAC works (Designing, Estimation, Fabrication, Erection, Installation including Testing and Commissioning.
Knowledge on HVAC Testing, Adjusting, Balancing (TAB) Works (Air Balancing and Water Balancing.)
Knowledge on Computer Operations Windows, Excel, PowerPoint, Auto CADD operation.
Review of HVAC Shop Drawings, Inspection, Supervision and Monitoring of site activities such as Equipment Installation(Chilled Water System &Units, Central Split units, AHU’s, ACCU’s, PACU, Split-A/C Units, Window A/C Units, CFU,FCU, VAV’s, CAV’s, Exhaust fans, Fresh Air Fans)
Knowledge on Ducting and Air Devices Installation as per drawing and actual site conditions.
Knowledge on installation of HVAC Air devices and controllers such as PDS(Pressure Differential Switch), AFS(Air Flow Switch), MVD(Motorized Volume Dampers)MF/SD(Motorized Fire/Smoke Damper),Duct Smoke Detectors, H2S Sensors, C2O Sensors.
Knowledge on Functional Testing and Commissioning of HCP Panel or DDC Panel (Sequence of Operation).
Familiar on SMACNA, ASME, ASHRAE, JERP (Jubail Export Refinery Project Standards) and ARAMCO standards.
Provide list of deficiencies, missing items and defects on site prior to project final hand over,
Preparation of daily and weekly activities on site.
Knowledge and familiar on ammonia refrigeration system.
Knowledge in operations and preventive maintenance of refrigeration compressors (Screw types and Piston type)
Knowledge on Repairs and Preventive Maintenance of Cooling Towers, Ammonia Pumps, Evaporative Condenser, and Shell and Tube Condenser.
Troubleshooting, Maintenance, General Servicing of Industrial Refrigeration, Chillers and Air conditioners (window types & split types) Installation if necessary.
Knowledge and application of three (3) phase motors like Ammonia pumps, Brine agitator, Air blowers, Condenser fans, Cooling tower fans, Hoist motors, Condenser pumps, Travelling cranes.
Repairs and maintenance in ice-cutting machines.
Knowledge and application of Magnetic contractors, Liquid line controls, Solenoid vales, Limit switch, Auto- defrost timers.
SEMINARS ATTENDED
HVAC DESIGN COURSE/SEMINAR AL ANDALUS INT’L SCHOOL
(PHILIPPINE SOCIETY OF MECHANICAL ENGR’S) Rakkah, Dammam
Saudi Arabia Chapter Kingdom of Saudi Arabia
January 08, 15, 22, 29, 2016
DDC OPERATION TRAINING AL-HASA HEALTH CENTER (AHHC)
(HONEYWELL) (ARAMCO HOSPITAL), Al-Hasa
December 29, 2015 Kingdom of Saudi Arabia
INTERIM LIFE SAFETY MEASURES (ILSM) SEMINAR ARAMCO, Medical Services Org.
October 27, 2014 Dhahran, Kingdom of Saudi Arabia
H2S- HYDROGEN SULFIDE SAFETY SEMINAR CPF-USSF ARAMCO Facilities
April 17, 2013 Manifa, Kingdom of Saudi Arabia
APPLIED INSTRUMENTATION AND LUBRICATION Western Institute of Technology
SYSTEM IN SUGAR MILLING La Paz, Iloilo City
November 24, 2001
TIG WELDING TECHNOLOGY Western Institute of Technology
February 07, 2001 Iloilo City
MATERIAL SCIENCE ENGINEERING Western Institute of Technology
February 08, 1999 Iloilo City
PERSONAL INFORMATION
Birthday : October 19, 1977
Age : 41 years old
Civil Status : Married
Height : 5’ 4”
Weight : 160 lbs
Religion : Roman Catholic
Spouse : Lorena Atonducan-Plana
CHARACTER REFERENCES
Engr. ROMEO P. GARCIA
Project Manager
Rezayat Company LTD.
Al-Khobar 31952, Kingdom of Saudi Arabia
Engr. REYNALDO PELAGIO
Plant Engineer
Suparana Holdings Incorporated
#9 Arayat St. Cubao, Quezon City Phillipines.
+63.917-***-****
(02) 724 2875
Engr. JOEL C. BAUTISTA
HVAC Project Manager (MANIFA Projects)
Baseelah Mechanical Works Co.(HVAC Division AL-OSAIS Contracting Co.)
P.O. Box 8275
Dammam 31482
Kingdom of Saudi Arabia
Tel # +966-*-***-****
Contact this candidate