ALADIN P. LIBUNAO

Block * Lot * RCD Villas De Bacoor,

Dulong Bayan, Bacoor, Cavite (Philippines)

Mobile No. +63-939-***-****

Email add: ac700k@r.postjobfree.com

PROFESSIONAL SUMMARY:

• Experienced Project Manager/Senior Checker with more than 18 years experience in Steel Detailing for both Structural and Miscellaneous Steel. Strong leadership and relationship-building skills. Areas of expertise include direct coordination with clients and Project conflict resolutions.

• Extensive skills in Tekla 2D/3D Checking, Modelling, and Editing.

• Skilled project estimator for both Hourly and Tonnage costing.

• Years of experienced as counterpart Steel Detailer and Estimator of U.S. based Fabricator and Erector

• Experienced in Construction that includes QA/QC in Dubai and Site Engineer in Guam U.S.A. OTHER SKILLS:

• Project Management/Team leadership

• Project conflict resolution / Engineering.

• Construction

• Self Motivated

WORK EXPERIENCE:

1.) FREE-LANCE X-STEEL DETAILER (STRUCTURAL AND MISCELLANEOUS)

• A freelance Steel Detailer of U.S., N.Z., and Canadian based infrastructures per Structural & Architectural design drawings issued by the Fabricators and Detailing Company as a DETAILING SUBCONTRACTOR. Prepares all detailing requirements such as 3d modeling using TEKLA software (V19, V20, V21, &V2017), 2D drawings

(Editing of Erection, Assembly and Part Drawings), prepare RFI’s, Technical question and sketches (using Bluebeam), Tekla reports, 3d pdf drawing in compliance with AISC, CISC and Fabricators standard.

• Prepare Project Estimates and Scheduling being used in Bidding on Projects. Position: Freelance X-Steel Detailer (Structural / Miscellaneous Steel)

(February 2017 – Present)

2.) PENTAGON STRUCTURAL STEEL DETAILING

• A counterpart Philippine steel detailing office of AHLBORN STRUCTURAL STEEL INC. using the 19, 20.1 & 21.1 version of TEKLA (X-Steel) Software located at Century Court Santa Rosa, California U.S.A. Office:

No. 17A Rm. 306 – 308 Saint Martin Bldg.,

West Point St., Cubao, Quezon City. Philippines

Position: Project Manager/ Checker/ Modeler/Detailer (Structural / Miscellaneous Steel) August 1, 2010 to January 2017

Duties And Responsibilities:

Ø Responsible for all Engineering and Technical drawings, coordinates with the AHLBORN Project Managers and give full technical support required to make sure that we release good quality drawings, both for fabrication and erection purposes.

Ø Responsible for handling specific projects from start to finish with client satisfaction and profitability being top priorities and also accountable with respect to scheduling, accuracy, and verification of completion. Ø To Review Project Setup information by AHLBORN Project Managers. Be familiar with all project information, including project files, specs, design, scope, fabricator standards, etc. Ø Process, coordinate and disseminate information to all concern and carry out all instructions per project setup including assigning layouts, asking questions, etc. Ø Write formal RFI's as requested by AHLBORN Project Managers, ask specific questions regarding items jeopardizing the schedule beforehand and issue to AHLBORN. Ø Review RFI answers, approval of comments, new information, design revisions for changes in scope and alert AHLBORN Project Manager of its impacts. Generate PX for these changes, as instructed by the AHLBORN Project Manager.

Ø Answer-in-house questions immediately. If an answer cannot be immediate, discuss this with the person asking. Ø Review drawings prior to sending for approval or fabrication to AHLBORN, to ensure all information is accurate and completely incorporated.

Ø Review checking mark ups, communicate with AHLBORN noting correction/improvement plans, etc. 3.) ROWLAND ENTERPRISES PHILS. INC. (PACIFIC COAST DETAILING PHILS.)

• A branch office of ROWLAND ENTERPRISES INC. in California, U.S.A., and a Steel Detailing company which specialize both in Structural and Architectural works. Main Office:

5256 S. Mission Rd. Suite 410

Bonsall, California 92003 USA

Philippine Office:

Rooms. 301-304 ICITE Bldg., Orchard Road

Eastwood City, Libis, Quezon City, Philippines

Position: Structural X-Steel Checker (Structural / Miscellaneous Steel) October 2008 to July 2010

Duties And Responsibilities:

Ø Analyzes and detail structural steel member of U.S. based infrastructure per Structural & Architectural design drawings issued by the Designer/Gen. Contractors. Prepares Erection and Shop drawings using Autocadd and Tekla (X-Steel) in compliance with AISC and Fabricators standard being done in Manila (Philippines) based office.

Ø Responsible for the accuracy and completeness of each drawing to satisfy that the drawing is legible, well arranged and completely noted so that it may be readily understood by both shop field men without any question or possibility of misinterpretation.

Ø Responsible for helping to coordinate with the Modelers and 2D Editors with respect to scheduling, accuracy, and verification of completion. Helping the Project Manager to meet schedule requirements, adhere to administrative policies, and verifying needs of the Modelers and 2D Editing staff. Ø Perform model checking, ensure that all the design requirements and detailing standards for both Fabricators and Contractors are incorporated in the model.

Ø Preparing a bill of materials with the specification. Ø Prepare geometry and design sketches of connection for Engineer’s approval. Ø Preparations 2-dimensional and 3-dimensional model/lay out. 4.) BASE CORPORATION

• A General Contractor of a first class Housing units in Guam, U.S.A. Main Office:

P. O. Box 23903, Barrigada

Guam, USA

Position: Site Engineer

December 2007 to July 2008

Duties And Responsibilities:

Ø Supervised all civil works, ensure that all underground utilities are installed correct and in proper elevations. Ø Surveying of house lot areas and house foundation based on surveyors design. Ø Coordinates to all subcontractors regarding safety measures as per OSHA standards. Ø Coordinates to the supervisors/consultants regarding the site status, schedule, and quality of works. Ø Prepare daily accomplishment report and material monitoring report. 5.) DUBAI CONTRACTING COMPANY LLC

• A Contracting Company in Dubai, UAE, which is responsible to build a high standard Hotels and Condominium Units located in Palm Jumerah Dubai UAE.

Main Office:

Al Raskhor Dubai UAE

P.O. Box #232 Dubai, UAE

Position: QA/QC Engineer

April 2007 – November 2007

Duties And Responsibilities:

Ø All quality control related activities and procedures, including document control. Ø Enforce quality assurance and site safety per DCC and ISO standard. Ø Monitor site materials handling and overall quality assurance system. Ø Supervise site work to ensure quality workmanship and fixing of materials. Ø Ensure that surveying instruments are calibrated and report any invalid instrument for calibration prior to expiry. Ø Preparation of Quality Control Plan, inspection and test plan, check sheets are related procedures. Ø Implementation of the Quality Control Plan for the project. Ø Co-ordination with Project Manager and Project Engineer regarding quality control requirements. Ø Reviewing the daily quality inspection reports.

Ø Daily site inspection and periodical off-site inspection. Ø Ensure completion of the necessary documentation to verify that the work has been performed in accordance with the contract specifications and quality control requirements. Ø Ensure that all test reports are verified to meet contract requirements. Ø Maintaining and controlling all documented quality records in a retrievable manner. Ø Reporting to the Project Manager regarding deficiencies in the operation of the quality control system. Ø Completion of final quality documentation in a presentable manner, in accordance with the conditions of contract, and quality control plan.

6.) FREE-LANCE STEEL DETAILER (STRUCTURAL AND MISCELLANEOUS)

• A Free-lance Steel Detailer of U.S. based infrastructure per Structural & Architectural design drawings issued by the Designer/Gen. Contractors. Prepares Erection and Shop drawings using Autocadd / X-Steel in compliance with AISC and Fabricators standard being done in Manila. Position: Structural Steel Detailer / Checker (Structural / Miscellaneous Steel)

(February 2006 – April 2007)

Duties And Responsibilities:

Ø Prepare Anchor bolt settings, Embed location, and Erection drawings, analyzes and detail structural steel member of U.S. based infrastructure per Structural & Architectural design drawings issued by the Designer/General Contractors. These drawings give complete instructions for cutting, punching, and then assembling the various structural members with bolt and/or welds. Ø Responsible for the accuracy and completeness of each drawing to satisfy that the drawing is legible, well arranged and completely noted so that it may be readily understood by both shop field men without any question or possibility of misinterpretation.

7.) INTERMEDIARIES DETAILING PHIL-ASIA INC.

• The Steel Detailing Company, which specializes both in Structural and Architectural works. Office:

3rd Floor MC Building, 115 National

Road, Bayanan, Muntinlupa City 1772

Philippines

Position: Structural/Miscellaneous Steel Checker / Project Coordinator

(2005– 2006)

Duties And Responsibilities:

Ø Prepare Anchor bolt settings, Embed location, and Erection drawings, analyzes and detail structural steel member of U.S. based infrastructure per Structural & Architectural design drawings issued by the Designer/General Contractors. These drawings give complete instructions for cutting, punching, and then assembling the various structural members with bolt and/or welds.

Ø Responsible for the accuracy and completeness of each drawing to satisfy that the drawing is legible, well arranged and completely noted so that it may be readily understood by both shop field men without any question or possibility of misinterpretation.

Ø Review project setup with Project Manager. Know all information relevant to the project, including design drawings, specifications, scope and fabricator standards. Ensure that all instructions, latest information and RFI responses are distributed to all staff involved in the project. Ø Report to the assigned Project Manager, regarding the completed portion of each assigned task on a daily basis. This reporting will be done as per the guidelines established by the General Managers, and will be supplied in a uniform manner to all noted.

Ø Know and follow the current Project Flow in all projects involved. Ensure that the checkers, modelers & editors also follow the Project Flow.

Ø Track the positive and negative items that impacted the Project Flow on each specific project and use this information to improve the Project Flow on future projects. Ø Provide suggestions to the General Managers and Project Managers regarding areas of focus for training, specific employees to train, etc.

8.) STEEL SYSTEM ENGINEERING PHILIPPINES AND CONSULTANCY INC.

• A branch office of Steel System Engineering based in California, U.S.A., and a Steel Detailing Company, which specialize both in Structural and Architectural Works. Main Office:

4340 Fulton Ave., 3/F Sherman Oaks, California, U.S.A. Branch Office:

RIMA Building #161 Lakeview Drive, Kawilihan Village, Bagong Ilog, Pasig City, Philippines

Position: Structural Steel Detailer / Checker

(2001– 2005)

Duties And Responsibilities:

Ø Prepare Anchor bolt settings, Embed location, and Erection drawings, analyzes and detail structural steel member of U.S. based infrastructure per Structural & Architectural design drawings issued by the Designer/General Contractors. These drawings give complete instructions for cutting, punching, and then assembling the various structural members with bolt and/or welds.

Ø Responsible for the accuracy and completeness of each drawing to satisfy that the drawing is legible, well arranged and completely noted so that it may be readily understood by both shop field men without any question or possibility of misinterpretation.

Ø Prepare RFI’s, and design sketches for Engineer’s approval. Ø Preparing Materials take-off or Advance bill of materials with specifications. 9.) NORTHRIDGE CONSTRUCTION & MANAGEMENT CORPORATION

• A Construction firm in the Philippines, which specialized in exclusive Condominiums and Housing units. Main Office:

San Antonio Village, Makati City

Philippines

Position: Site Engineer / Safety Officer

(1999– 2001)

Duties And Responsibilities:

Ø Coordinate with Project Engineer and Co-Engineer with respect to project progress. Prepare weekly and monthly accomplishments as well as technical correspondence. Ø Monitor and supervised Architectural or finishing works. Ø Observe proper safety precautions to all workers. Ø Prepare weekly reports and suggestions, reports in order to follow safety rules. 10.) DM CONSUNJI INC.

• One of the biggest and well known Construction Company in the Philippines and some other part of Asia. A General Contractor of High Rise buildings, Condominiums and Housing units. Main Office:

Libis, Quezon City

Philippines

Position: Site Engineer / Safety Officer

(1998– 1999)

Ø Monitor and supervised civil works, coordinates with the Project Engineer and Co Engineer’s with respect to project progress.

Ø Controlling method statement of construction work to minimize the non-conformance activities to be rectified at the Project site.

Ø Prepare weekly and monthly progress reports and material request. 11.) ARCRIDGE CONSTRUCTION

• A newly established Construction Company, whose the Owners are all respected Engineer and Architects, which also specialized in first class hotels, condominiums, and housing. Main Office:

Tagaytay Highlands, Tagaytay City

Philippines

Position: Field Engineer

(1996– 1998)

Duties And Responsibilities:

Ø Coordinate with General Contractor and Project Engineer with respect to project progress. Prepare weekly and Monthly accomplishments as well as technical correspondence. Ø Implementation and supervise the construction work schedule. Ø Co-ordination with the MEP Engineers

Ø Control the sequence work as per construction schedule. ELIGIBILITY:

Career Development Tekla Structures Training Version 14 HSD Computers PTE. LTD. CO.

Quezon City, Philippines

September 2008

Autocadd Rel.14 w/ Color Rendering & 3D Lay-out

MICROCADD Technologies

Cubao, Quezon City, Philippines

February 1999

Educational Attainment Bachelor of Science in Civil Engineering Araullo University, Cabanatuan City,

Nueva Ecija, Philippines

May 1996

COMPUTER LANGUAGE LITERACY:

Ø AutoCAD

Ø Tekla Software (X-Steel)

Ø IntelliCad

Ø MS Office

Ø Adobe Acrobat

Ø Blubeam Revu

PERSONAL INFORMATION:

Ø Date of Birth : March 21, 1975

Ø Place of Birth : San Miguel, Bulacan, Philippines Ø Age : 43 yrs. Old

Ø Nationality : Filipino

Ø Height : 5’- 7”

Ø Weight : 180 lbs

Ø Religion : Catholic

Ø

CHARACTER REFERENCES:

Dominador Soriano Romy M. Rivera

Operations Manager Gen. Manager / Owner

STL Drafting And Detailing Services XPROF Civil Engineering Services Cell.: +63-928-***-**** Cell.: +63-977-***-**** Kenneth P. Azucena

Project Manager

Compass Steel Detailing Phils.

Cell.: +63-906-***-****

I hereby certify on my honor that the information stated above is true and correct to the best of my knowledge. Aladin P. Libunao

Signature

Contact this candidate