EHS Engineer
Resume:
Garrett M. Tilini
*************@*****.***
Objective
Apply my knowledge, training, skills sets, and core safety values to promoting healthy life practices in the workplace environment.
Education
(CSU) Columbia Southern University
Orange Beach, Alabama Senior Year
Working towards a Bachelor of Science degree in Occupational Safety and Health.
(BYU-H) Brigham Young University-Hawaii
Laie, Hawaii 2 years
(UH) University of Hawaii
Honolulu, Hawaii 1 Year
Certifications
OSHA & U.S. Department of Labor 6-16-2020
OSHA #510 Occupational Safety and Health Standards for the Construction Industry
OSHA & U.S. Department of Labor 6-16-2020
OSHA #500 Trainer Course-Construction Industry
Work Experience
EHS Engineer (November 2016-June 2018)
Tesla Inc. Gigafactory 1 (Sparks, Nevada)
Worked for Tesla at the $5.1 Billion Mega project known as Gigafactory 1, which is estimated to be a 16 million square foot facility upon completion. Located on Electric Ave. in Sparks, NV.
Actively engaged and managed all manufacturing, tool Install, and construction safety for 10,000+ direct hires, contractors, and subcontractors on a daily basis in complying with Tesla Corporate Safety regulations, local Nevada state laws, and all OSHA Standards and Regulations while in the field, through on-site training, and new hire orientations.
Conducted safety meetings, safety audits, safety walks site wide which also includes sign offs for (MEP) Mechanical-Electrical Procurement work and activities.
Conducted and assisted in incident/accident investigations, reviews, and corrective actions.
Assisted all Tesla contractor and subcontractor Safety representatives with safety issues, hazards, and best work practices for their scope of work.
Assisted with Tesla fire prevention program, Security/ERT and EMS issues, and on-site evacuations.
EHS Supervisor (January 2016-November 2016)
ABB (San Francisco, California)
I worked for ABB a Swedish-Swiss multinational corporation headquartered in Zürich, Switzerland. I worked at the Pacific Gas & Electric (PG&E) 425 Folsom St. Embarcadero Sub-Station project and the Pacific Gas & Electric (PG&E) 1201 Illinois St. Potrero Sub-Station project in San Francisco, CA.
Managed all construction safety for 100+ contractors and also tool Install on the (GIS) Gas Insulated Switchgear system which will generate 230kv power for a lot of San Francisco through sophisticated European Technology.
Conducted safety meetings, safety audits, and safety walks on-site by ensuring on a day to day basis that all were keeping and abiding by ABB corporate safety regulations, California state law, and the Standards and Regulations of Cal-OSHA.
Assisted ABB contractor Safety representatives with safe practices for hazards associated with their scope of work.
Safety Supervisor/Consultant (June 2014-December 2015)
Sturgeon Electric Inc. (Phoenix, Arizona)
I worked for Sturgeon Electric as a Safety Supervisor/Consultant at the USAA Project located at 2546 W. Happy Valley Rd. Phoenix, AZ and the State Farm Marina Heights Project located at 500 E. Rio Salado Parkway, Tempe AZ, which employed 180 electricians installing power for tools, equipment, and lighting.
Assisted Sturgeon Electric by coordinating workers/electricians on a day-to-day basis in complying with Sturgeon Electric Corporate Safety regulations, local Arizona state laws, and all OSHA Standards and Regulations while in the field including OSHA 29 CFR 1926 on Subparts AA Confined Spaces in Construction, C-General Safety and Health, E-Personal Protective and Life Saving Equipment, K-Electrical, L-Scaffolds, M-Fall Protection, P-Excavations, X-Stairways and Ladders, Z- Toxic and Hazardous Substances, NFPA 70 E-National Electrical Code, and ANSI Standards.
Monitored Pre-Task Plans (PTP’s).
Conducted safety meetings, safety walks, safety audits of equipment, material and their use, and reviewed safety protocols with work crews.
Environmental Health & Safety Manager (November 2013-June 2014)
Rosendin Electric Inc. (Tempe, Arizona)
I worked at the Apple Project a 1.3 million square foot manufacturing facility, located at 3740 South Signal Butte Rd. in Mesa, AR.
Managed Safety for 1,500 contractors and sub-contractors on a daily basis in complying with Rosendin Electric Corporate Safety regulations, local Arizona state laws, and all OSHA Standards and Regulations while in the field, through on-site training, and new hire orientations, Lock-Out/Tag-Out (LOTO), boom lift, scissor lift, and fork lift trainings.
Conducted audits of equipment and material and their use.
Monitored Pre-Task Plans (PTP’s), Air quality of the work areas, and Methods of Procedure (MOP’s) before the start up and shut down of High Voltage equipment which will use approximately 2.1 billion kilojoules a year.
Safety Coordinator (April 2013-November 2013)
Corbins Electric (Tempe, Arizona)
Worked at Intel, located at 4500 South Dobson Rd. in Chandler AZ. (Intel at Fabs 12, 22, 32, 42, and FSB).
Coordinated the safety program for over 300 electricians.
Assisted, directed, coached, and corrected electricians on a daily basis in complying with Corbins Electric Corporate Safety regulations, local Arizona state laws, and all OSHA Standards and Regulations.
Monitored PTP’s, conducted safety meetings, safety walks, safety audits of equipment and material and their use, and reviewed safety protocols with work crews.
Safety Coordinator (April 2012-April 2013)
Jenco Electric (Tempe, Arizona)
Worked at Intel which is located at 4500 South Dobson Rd. in Chandler AZ (Intel at Fab 42).
Coordinated the safety program for over 200 electricians.
Assisted, directed, coached, and corrected electricians on a daily basis in complying with Jenco Electric Corporate Safety regulations, local Arizona state laws, and all OSHA Standards and Regulations.
Monitored PTP’s, conducted safety meetings, safety walks, safety audits of equipment and material and their use, and reviewed safety protocols with work crews.
Electrician (2011-2012)
Rosendin Electric, Inc. (Tempe, Arizona)
Worked at Intel located at 4500 South Dobson Rd. in Chandler AZ installed and de-installed tools in Fabs 12, 22, 32. Last tool installed was P1270 at Fab 12.
Clean room Sub-Fab/Fab trained and experienced in Fabs 12, 22, 32.
6D Demo trained and experienced.
HPM (Hazardous Production Material) trained.
Interstitial trained.
EEW (Energized Electrical Work) trained and experienced.
COHE (Control of Hazardous Energies) and LOTO (Lock-out/Tag-out) trained and experienced.
Under RMF (Raised Metal Floor) and Barricade trained and experienced.
Bend and cut conduit, connected conduit couplings, fabricated and secured conduit support brackets and gutters, pulled wire, terminated of fixtures and equipment leading from the utility, Sub-Fab, and Fab levels.
Reviewed PTP’s to maintain safety protocols. No ITP (interruption to production).
Electrician (2010-2011)
CEI (Phoenix, Arizona)
Worked at ASU (Arizona State University) located at 411 N Central Ave, in Phoenix, AZ.
Bend and cut conduit, connected conduit couplings, fabricated and secured conduit supports, pulled wire, terminated of fixtures and equipment
Electrician (2008–2010)
UK Electric (Peoria, Arizona)
Worked in various areas in the State of Arizona on Safeway grocery stores and Fry’s grocery stores remodeling projects.
Hot works: connected wires to circuit breakers and other components, inspected electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and ensured compliance with codes.
Advised management on whether continued operation of equipment could be hazardous.
Tested electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters to ensure compatibility and safety of system.
Worked from ladders, scaffolds, scissor lifts, boom lifts, and knuckle booms lifts to install, maintain or repair electrical wiring, equipment, and fixtures.
Bent and cut conduit, connected conduit couplings, fabricated and secured conduit support brackets, pulled wire, and terminated fixtures.
Underground work: dug trenches, broken up concrete using air-hammer, measured, cut, bent rigid, and PVC conduit using a table bender and heat box.
Electrical Groundsman (2007 – 2007)
Summit Electric (Kapolei, Hawaii)
Worked at the Tesoro Refinery located 91-325 Komohana St, Kapolei, HI and Chevron Refinery located at 91-480 Malakole St, Kapolei HI.
Rigid conduit: threaded conduit end, connected couplings, cut and bent conduit using measuring instruments, hand tools, and bending table.
Fabricated and secured conduit support brackets.
Constructed controllers and panels using power drills, drill presses, taps, saws and punches.
Bent and cut Rigid and PVC conduit, connected conduit couplings, fabricated and secured conduit support brackets.
Pulled wire and terminated fixtures.
Electrical Groundsman (2006-2006)
Power Plus Electric (Kapolei, Hawaii)
Worked at the Tesoro Refinery located 91-325 Komohana St, Kapolei HI and Chevron Refinery located at 91-480 Malakole St, Kapolei HI.
Rigid conduit: threaded conduit end, connected couplings, cut and bent conduit using measuring instruments, hand tools, and bending table.
Fabricated and secured conduit support brackets.
Constructed controllers and panels using power drills, drill presses, taps, saws and punches.
Connected conduit couplings, fabricated and secured conduit support brackets.
Pulled wire and terminated fixtures.
Broken up concrete and dirt using air-hammer; measure, cut and bent rigid and PVC.
Electrical Groundsman (2005 – 2006)
M. Sakuma Electric Inc. (Honolulu, Hawaii)
Worked in various areas on Oahu supplying secondary power to homes and businesses from Hawaiian Electric Company (HECO).
Underground: dug trenches, broken up concrete using air-hammer.
Measured, cut and bent PVC conduit using a heat box.
Installed secondary power to houses and street lights from transformers.
Personal References
Curtis Stoker Julian Quinonez Julio Garcia Caleb Hoffman Jim Strickler
(671)487- 7380 480-***-**** 503-***-**** 480-***-**** 480-***-****
Contact this candidate