Electrical Engineer Engineering
Resume:
*********@*******.***
Tel: 403-***-****
EDUARDO DOMINGO, P.ENG
SUMMARY
Electrical Engineer with more than 30 years’ experience in Engineering and Project Management for the design, construction and commissioning of large, medium and small multi-discipline engineering projects in the oil and gas, mining, waste water treatment, industrial, commercial and institutional facilities. Engineering experience includes detailed design of single line diagrams, instrumentation diagrams, MV/LV power distribution system, grounding system, cable tray layout, motor control schematic diagram, cable schedule, equipment schedule, load list, area classification, power and control, lighting and auxiliary system, material take-off, load calculations, short circuit, arc-flash, load flow and coordination studies, voltage drop calculations, cable tray fill calculations, fugitive emission study, electric heat tracing design and cable selection.
Project Management experience includes the preparation of design basis memorandum (DBM), equipment specifications for switchgear, MCC, transformers, VFD, UPS, PLC, SCADA, solar PV panels, generators and motors, preparation of construction work packages, equipment data sheet, material requisition RFQ and RFP, Technical Bid Evaluation, management of change (MOC), RFI, FAT Test, resource management, construction coordination and start-up assistance and field evaluation of existing electrical installations. Coordinate with clients, equipment manufacturers and suppliers, utility companies and other design disciplines during the development of electrical designs. Knowledgeable with NEC, CEC, IEEE and API standards and their application to electrical systems. Well verse with AutoCAD and ETAP/SKM power system tools.
SKILLS
Proficient in MS Word, Excel, Power Point.
Proficient in AutoCAD, Navisworks, heat tracing calculation software (TraceCalc Pro), lighting design software (Luxicon and AGi32).
Project Engineering (Resource Management, Estimating, Scheduling, Procurement, HAZOP, Root Cause Analysis, Management of Change, and Commissioning/Start-up).
Proficient in power system study using ETAP/SKM power tools for arc-flash, protective relay coordination, short-circuit and load flow.
Fugitive Emission Study, cable tray fill calculation, voltage drop, load calculation using industry standard spreadsheet.
Familiar with Canadian Electrical Code, IEEE standards, API RP 500/505 (Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities), NFPA 497, National Electrical Code NFPA 70, NFPA 70E, NEMA, IEC and ANSI standards.
Area classification study using NFPA 497 and API 500 as basis.
Hands-on experience on PLC hardware and software (Allen-Bradley).
Experience in Greenfield and brownfield projects.
Hands-on electrical troubleshooting/problem solving skills, teamwork skills, customer relations/liaison.
2
WORK EXPERIENCE
Electrical Engineering Lead July 2017-Present
MEQY Engineering
Leading Electrical Engineering project teams from conceptual, detailed engineering to construction and commissioning.
Responsible for the development of the power distribution system single line diagrams for MV/LV and solar PV power.
Responsible for the engineering calculations and analysis for demand load, equipment sizing, voltage drop, motor starting, neutral grounding resistors (NGR’s), and system power factor improvement.
Specify and select electrical equipment, prepare datasheets, prepare RFQ’s and material requisitions.
Preparation of proposal development for bidding to different clients.
Adherence to all project standards and corporate procedures, design criteria and engineering calculations.
Reviews deliverable quality and supporting documents.
Hire, train and mentor other engineers and supporting staff.
Carry out inspection and witness testing of electrical equipment as required.
Implement policies, standards and procedures for the engineering and technical work performed in the department.
Assisting project managers in project design and execution to meet client schedules.
Proficient with MS Office and industry standard engineering software.
Strong communication and interpersonal skills.
Senior Electrical Engineer March 2015-December 2016 Millennia Engineering
Project Lead Electrical Engineer responsible for the development of all aspect of electrical engineering at Pre-FEED, FEED, detailed engineering design, construction and commissioning for gas plant, fertilizer plant, NGL facilities and Enhanced Oil Recovery (EOR) batteries for both greenfield and brownfield projects.
Developing designs for starters, motors, VFD, MCC, switchgears, generators, DCS, PLC, SCADA, control panels, analyzers, and other electrical equipment for both medium voltage and low voltage distribution system.
Lead the preparation of equipment specifications, sizing, data sheets, material requisitions and vendor data reviews for motor control centers, switchgears, VFD, motors, transformers, Emergency Generators, UPS, DCS, PLC, mechanical equipment package.
Prepared Electrical cost estimate for material and labor from FEED to detailed design stage.
Prepared key documents such as load list, equipment list, single line diagrams, VFD/motor control schematics, lighting schematics, cable routing, electrical layouts, grounding layouts, installation details, heat tracing isometric, cable schedule, area classification drawings and alarm and shut-down key.
3
Preparation of Engineering Work Packages (Scope of Work).
Undertake the fugitive emission study of process buildings and skids on the projects.
Prepared the overall area classification on CF Industries Plant in Iowa, USA based on NFPA 497 and API 500 on new process additions to the plant as basis.
Undertake the development of power system studies for arc-flash, relay coordination, short- circuit and load flow using ETAP software. Successful completion of studies on arc flash, short circuit and relay coordination on ARC Resources Ltd. Redwater Plant and Athabasca Kaybob West Plant facilities in Alberta.
Preparation of electrical, control and instrumentation drawing packages.
Undertake the preparation of Electrical Equipment Specifications, RFQ’s, technical bid evaluation of vendor bids and quotations, and create Purchase Order Requisitions for transformers, emergency generators, motors, VFD, UPS, DCS, PLC, SCADA, cables, switchgears and MCC.
Estimate the man-hour and resource management for the project, technical specification and review of bid documents.
Provide weekly reports to the Project Manager to the progress of the electrical design on regular project staff meetings.
Provide input and technical guidance to CAD Designer/Drafters, Designers, and Engineers working on the same project.
Determine location, size and arrangement of major electrical equipment in MCC building.
Check, review and sign off drawing packages and engineering documents. Senior Electrical Engineer October 2010-November 2014 WorleyParsons Canada
Project Lead Electrical Engineer for the Norman Wells, NWT, Imperial Oil Resources Production Projects and for the Cold Lake Productivity Maintenance (PM) and Infill Pad Projects. The project encompasses all modifications and upgrade of existing plant and pipelines facilities at Norman Wells Operations and the addition of new Steam Assisted Gravity Drainage (SAGD), Cyclic Steam Stimulation (CSS) productivity and steam injection pads for the Cold Lake Operations.
Lead the development of all aspect of electrical engineering support services at Pre-FEED, FEED, detailed engineering design, construction and commissioning. Develop LV (120-600V) and MV (25kV) electrical distribution systems for new and existing facilities including solar PV for SCADA.
Lead the preparation of equipment specifications, sizing, data sheets, material requisitions and vendor data reviews for motor control centers, VFD, motors, transformers, UPS, PLC, SCADA, mechanical equipment package and switchgears.
Prepared key documents such as load list, equipment list, single line diagrams, VFD/motor control schematics, lighting schematics, cable routing, electrical layouts, grounding layouts, installation details, heat tracing isometric, cable schedule and area classification drawings.
Review of P&ID in order to develop Electrical Drawings & Specifications, load list and equipment list.
Assisting project managers in project design and execution to meet client schedules.
Assisting with control narratives, shut down keys, P&ID development as required.
Development of Electrical Construction Contract Documents, Design Basis Memorandum and Engineering Work Packages (Scope of Work).
4
Responsible for the development of power system studies for arc-flash, relay coordination, short- circuit and load flow using SKM power tools.
Generate specification for electrical and packaged equipment. Review and mark-up Package/Skid and modular drawings.
Presentation of electrical and controls package drawings to stakeholders for Constructability and Operability reviews and attending HAZOP meeting and create management of change (MOC) as required.
Responding to RFI request during construction and supporting operations personnel during pre- commissioning and start-up of facilities.
Responsible for the Electrical Equipment Specifications, RFQ’s, technical bid evaluation of vendor bids and quotations, and create Purchase Order Requisitions for transformers, motors, VFD, cables and MCC. Performing witness tests at factory / site for all major electrical equipment.
Responsible for the man-hour estimate and resource management for the project, preparation of scope of work, technical specification and review of bid documents.
Responsible for developing the work share (High Value Engineering) scope of work and execute effectively the work as per project requirements.
Participate in client 3D model review and multi-discipline project related 3D model reviews and meetings.
Review vendor drawing submittals, respond to field requests for information and perform technical bid analyses.
Check, review and sign off drawing packages.
Lead group of engineers and designers for the execution and completion of the project.
Mentoring other engineers and designers.
Electrical Engineer March 2010 – October 2010
Snamprogetti (Saipem) Canada
Responsible for the detailed design, engineering, procurement, and construction support for HV/MV/LV distribution system for Canadian Natural Resources Limited (CNRL) Hydrotransport Trance 2 Project.
Responsible for the development of key documents such as data sheet and technical specifications for 4.16kV and 600V MCC’s, 3500HP, 4.16kV pump motors and medium voltage VFD’s, MV/LV cable, 15/20MVA, 72kV-4.16kV transformer and LV dry type transformers and UPS.
Responsible for developing the short circuit, arc-flash and protection relay coordination studies using ETAP power tools.
Responsible for developing key electrical documents such as single line diagram, schematic and wiring diagram, voltage drop calculations, area classification, electric heat trace, power and control for the 600-volt MOV’s, load list, equipment and tie-in list, tray fill calculations and cable schedule.
Responsible for the preparation of complete work package specifications, equipment selection and sizing, material requisition and bid evaluation.
Coordinated with the client on the purchase of major equipment and review the documents and as-built drawings submitted by vendors and suppliers for approval.
Issued purchase orders for transformers, motors, VFD, MCC, switchgears, cables, bulk materials and e-houses.
Stamping of documents and drawings packages as required. 5
Assisting project managers in project design and execution to meet client schedules.
Supported Lead Electrical Engineer in the preparation of project scope, man-hour estimate, project management, cost estimate, scheduling, project execution and close-out. Electrical Designer May 2008 – March 2009
WorleyParsons Canada
Responsible for the electrical design and engineering services for Suncor Firebag Pipelines Terminus 3 Project, Hot Bitumen Metering Facility.
Responsible for the development of key electrical documents such as electrical equipment list, load list, single line diagram, load calculations, voltage drop calculations, lighting calculations, electric heat tracing calculation, cable tray fill calculations, area classification, MV/LV motor control schematics, instrument and control, 25kV-4,160-volt medium voltage switchgear, 4,160- 480-volt motor control centers, 4,160-volt VFD, 480-volt MOV’s, 5kV-1200hp hot bitumen pumps, bill of materials and complete work package specifications.
Assigned as designer for the electrical and instrumentation design for Suncor Firebag Pipelines Block Valve Station Project and Instrument Station facilities.
Responsible for the design and drafting of single line diagram, electrical layouts, area classification layout, grounding MCC layout, transformer yard layouts, electric heat trace layout / isometric, power and control schematic for the 480-volt MOV’s, cable tray layout, junction boxes layout, power termination box layout.
Prepared material take off, bill of materials and complete work package specifications. Electrical Design Engineer January 2007 – May 2008 UMA/AECOM Canada
Participated in the preliminary and final design of electrical system for the AREVA Midwest Mine Project water treatment plant, maintenance shop and dry/offices facilities, dewatering wells, main effluent pump station, and heat tracing of the 17 KM inter-property pipeline including 4,160-volt secondary substations, 25kV-4,160-volt medium voltage switchgears, variable frequency drives (VFD), filtered power factor correction capacitors, 480-volt motor control centers (MCC) and three units of 4160-volt, 2000 kW stand-by generators.
Assigned as Electrical Designer/Engineer for the design and engineering services for the Cameco Key Lake Operations, Yellow Cake Containment Upgrades for centrifuge feed and effluent pumps, centrifuge screener and centrifuge washer booster pump. Responsible for the development of instrumentation loop drawings, single line diagrams, schematic wiring diagrams, equipment layouts, construction estimate, bill of materials, equipment specifications and complete work package.
Responsible for the electrical design and engineering services of the Canola seed processing demonstration plant project for the Canpro Ingredients Limited in Arborfield, Saskatchewan, including the addition of 1500 kVA, 25kV-480/277V service transformer, 3000A main switchboard, motor control centers, soft starters and variable frequency drives. Work includes load calculations, single line diagram, equipment list, equipment layout, MCC layout, reviewing 6
shop drawings and responding to design related field questions from contractors and utility companies.
Responsible for the electrical design and engineering services of the Cameco McArthur River Operations for its dry/offices facility expansion project including power, lighting, fire alarm, communication system, riser diagrams and grounding system. Work includes the generation of complete work package, bill of materials, construction estimate and bid specifications.
Responsible for the preliminary and detailed design of the Cameco Key Lake Operations 1.7 KM Supernatant Pipeline Project. Work includes the electric heat tracing of the pipeline, selection and installation of control and instrumentation system, bill of materials, construction estimate and bid specifications.
Responsible for the electrical design and engineering services for the City of Saskatoon Stonebridge Sanitary Sewer Lift Station. Work includes single line diagram, power, lighting and control, SCADA, bill of materials, construction estimate, reviewing of shop drawings and bid specifications.
Responsible for the electrical design and engineering services for the Agrium Vanscoy Potash Mine Operations Sewer Lift Station. Work includes single line diagram, power, lighting and control, bill of materials, construction estimate, reviewing of shop drawings and bid specifications.
Responsible for the electrical and instrumentation design for the construction of 25 metric ton per year capacity of used oil for the SaskAlta Base Oil Corporation in Humbolt, Saskatchewan. Work includes reviewing of vendor shop drawings, power equipment, load calculation, cable selection, control equipment, area classification and bid specifications. Electrical Maintenance Supervisor September 2004 – August 2006 Elektrotechnik Dieter Weissenbock, Austria
Responsible for the preventive and corrective maintenance schedule for the medium voltage switchgears, transformers, UPS, 480V 3-phase motors, motor control centers, variable speed drives, low voltage system and other electrical equipment of the food processing plant.
Provided engineering support to management and maintenance personnel and coordinated works for contractors.
Performed root cause analysis on electrical equipment of the plant.
Maintained the record of breakdowns and purchased materials as required. Electrical Engineer March 1991 – October 2002
Ministry of Defense and Aviation, Saudi Arabia
Assigned as Field Electrical Engineer for the execution of projects for the Armed Forces Hospital in Sharourah, Saudi Arabia. Projects includes the 50-bed extension for the hospital, nurse’s accommodation, waste water treatment plant, 2 each 1000 kVA, 13.8kV-220/127V substation, 500 kVA, 13.8kV-380/220V substation, 13.8kV-MV switchgear, 13.8kV (RMU) ring main unit, 7
addition of 3 x 1500 kW-480V gen-set to the existing emergency stand-by generating plant, upgrading the existing switchgears and MCC’s, UPS, fire alarm system, communication system and nurse call system. Responsible for the review of contractor and vendor drawings, equipment specs and construction documents.
Lead the preliminary and detailed design of 100-bed hospital extension project for King Fahad Armed Forces Hospital in Jeddah, Saudi Arabia, the 200-bed extension project for King Abdul Aziz Air Base Hospital in Dhahran, Saudi Arabia, 50-bed extension project, nurse’s accommodation, waste water treatment plant and the upgrading of 13.8kV medium voltage substations and power generation capability of the generators at Armed Forces Hospital in Sharourah, Saudi Arabia.
Involved in the preliminary and detailed design of the Ministry of Defense and Aviation Medical Directorate headquarters building including its ancillary buildings, emergency power plant, 13.8 kV medium voltage switchgear, distribution and utilization transformers, UPS, fire alarm system, communication system, chiller units, street lighting and building automation system.
Prepared electrical design packages from conceptual to detailed design and project supervision for the different projects of the Ministry of Defense and Aviation in Riyadh, Saudi Arabia including the review of bid proposals and design packages from the different contractors of the Ministry. Reviewed CAD drawings, shop drawings and executed site surveys, gathered data for design and prepared various drawings using AutoCAD.
Project Control experience include planning, preparation and updating of electrical project schedule for engineering, construction and commissioning activities, monitoring and inter- discipline coordination.
PROFESSIONAL AFFILIATION
Association of Professional Engineers and Geoscientist of Alberta (APEGA) Professional Engineer
Association of Professional Engineers and Geoscientist of British Columbia (APEGBC) Professional Engineer
Northwest Territories and Nunavut Association of Professional Engineers and Geoscientist
(NAPEG)
Professional Engineer
Institute of Electrical and Electronic Engineers (IEEE) Member
EDUCATION
Bachelor of Science in Electrical Engineering
Mapua Institute of Technology, Philippines
Project Management: Level 1
University of Calgary
Contact this candidate