Machine Operator Mechanical
Resume:
NATIONAL CITY, CA. *****
********@*****.***
JUANITO HIZON
JOB OBJECTIVE;
To secure a Position wherein my skills and abilities will be Utilized in electronic and mechanical
assembly.
HIGH LIGHTS OF QUALIFICATIONS:
OVER 10 YEARS OF ASSEMBLY EXPERIENCE;
Over 5 YEARS Experience of Soldering different
components and fully Qualified in board modifications, Surface mounting and trough hole.
Prepare and assemble electromechanical components and assemblies of moderate complexity to
support test technicians and rework areas by using blueprints, drawings, diagrams and written
processes.
Work is performed under a microscope while using a small hand tools machinery and other
application materials, monitors work in processes or completed work.
Three (3) years of related experience in quality assurance inspection within a manufacturing
environment or related work in a manufacturing Failure Analysis environment, preferred; detailed
oriented with good system.
WORK EXPERIENCE ;
Ametek Programmable Power. October 2017 Pressent
Mechanical Assembly, Preparing of chassis instalation. Connecting wires and harnessing, Installing
bus bar and assemblying to the chassis. Assembly of flex module connecting wires and harrnesing
Xylem Inc. (Sontek Technology ) May 2016 October 2017
Board Modification, Assemblying Different types of components such as, resistor, capacitor, IC'S,
DIODE by using a hand solder.
(Assembly of SL 500) Installing of Big and Small Transducer into housing with O Ring and Strip the
wire, connect it to the board thru solder and attached the board with screws and washers.
(Assembly of PCM1 4 or Also known as Module Rover) Install grip battery and screw it cut the
underwater male connector by 3" long and strip the end and apply crimps to each of 8 wires and
connect it to the board.
(Capacitor Assembly ) Assemble the 2 wires with the negative and positive sides, cut the ground of
the wire and crimp the end of the negative and positive side.
Transformer Assembly Assembled transformer by using 2 different colors of wire and with two
different kinds of turns such as 32 turns,and 8 turns / 16 turns and 2 turns.
February 2016 April 2016
TEM SYSTEM ( Eastridge )
+ Reworking of Medical Device such as removing of labels and Re labeling.
+Work and assigned also in kitting, and Packaging to make everything ready for shipping
the unit.
COBHAM Advance Electronics System. (July 2014 October 2015 )
Electronic and mechanical Assembly. ( Test Support )
Installation of components such as Resistor, Capacitors, Electrical wiring by using a hand solder and
Performed under a microscope.
Participate in safety training and actively comply with safety policies and practice maintain a clean
and safe workstation.
Improve and maintain 5S in your area; make suggestions for improvements.
Participate in every company activities in own work area, as well as events for other department to
enhance cross functional problem solving.
Collaborate in team meetings and activities, including SET team support as appropriate.
Perform miscellaneous related duties as assigned.
COBHAM Sensor System ( REMEC DEFENSE and SPACE ) San Diego, Ca. October 2010 July
2014. Value Stream 1 Department ( Test Support )
ESSENTIAL FUNCTIONS AND DUTIES;
1, Research the most current drawing inn an Enterprise wide system such as Anzio or SAP. verify
accuracy of drawing to the traveler instructions, if applicable.
2, Clean electromechenical components and sub assemblies using established processes and
procedures.
3, Install hardware, screws, tuning screws, connectors and prints protectors, install sub assemblies.
4,Prime and foam coils and ribbons on tested / tuned parts; clean and deburr, Delided assemblies.
5,Visually inspected work completed for accuracy and compliance to drawings and workmanship
standards.
6,Request materials and components to attach, install or complete as required ensuring appropriate
carrier for parts; inform supervisor and / or lead of assembly discrepancies. 7, Participate
in safety training and activity comply with safety policies and practices; maintain a clean and safe
workstatiion.
8, Assembly of Tube Optical Wired Guided also know as TOW installation of sub assemblies.
REMEC Defense and Space ( CHELTON ) San Diego Ca. ( Oct. 2005 Aug. 2010 )
Duties; Machine Operator; Operates REHM oven re flow machine, dispense machine. Heller
oven pick and place. Assembler of Monolithic Microwave integrated Circuits such as; filter switches,
multi pliers power amplifiers, converters, detectors and oscillators. Marking, Chem Film,Final Touch
Up.
1, SMT machine operator, surface mounting board modification.
2, Conduct incoming mechanical inspection and processing of classified devices with Security
procedures and safety precautions.
3, KIT RMA product wiith associated customer and REMEC forms / documents and routes kit for
furthers instructions in accordance with REMEC procedures.
4, Ability to visually inspect product to workmanship standards.
5, Performs work of low to high complexity; using judgment within defined and established Policies,
procedures and standards while maintaining the spirit of excellence. 6, Review
manufacturing documentation ensuring the necessary criteria and provisions are Incorporated to
permit effective inspection and testing of materials. 7, Analyze
reports and returned product; Initiate correction action for procedural, product or process
deficiencies.
8,Visually inspect work completed for accuracy and complience to drawings and workmanship
Assemblies.
COMPANY ( COBHAM ) CERTIFIED PROCESSES
Application of Foam Staking Screws
Chem Film High Temp Reflow Solder
Pre Seal Clean Cleaning
Solder Assembly ( Process X ) Self Locking Screw Installations
Microelectronics Components Cleaning of Combine Filter Assy.
Cleaning Vapor Degreaser Solder Components Pre tin
Workmanship Manual Re work Traceability
Work Station Housekeeping Maintain Clean Room Policy
Blue Print Reading Electrostatic Discharge
Foreign Object Debris / Elimination Program Blue Print Reading
Temp. Sensitive MLCC Componenets.
ADMIRAL KIDD INN; Navy Base Point Loma, San Diego Ca.
DUTIES; Linen Personel, Accountable incoming and outgiong of Linen.
Distribution, Provide assistance to Military Personnel, Manage MSDS.
Inventory and invoices.
BIOSITE ( EASTRIDGE ) San Diego Ca. ( May 2002 July 2003 )
DUTIES; Responsible in packaging medical devices, printing manufactured expiration date.
Responsible in burning and verifying chip code in the computer.
EDUCATION;
GRADUATE; Bachelor of Religious Education.
Doane Bible College, ILO ILO City, Philippines.
GRADUATE; General Radio Communication Operator
Central Luzon Technical Institute, Olongapo City, Philippines
GRADUATE; Electronic Service Technician, Olongapo City, Philippines.
Central Luzon Technical Institute, Olongapo City, Philippines.
Contact this candidate