GARY L. MOLINE P.E.

**** ****** **** *******, *******. 30341-5765

770-***-**** (H) ac4mwv@r.postjobfree.com

Responsibilities

As Project Manager I am and have been responsible to manage a project team during programming, planning, detailed design, engineering, and procurement, and construction, construction administration or construction management. I incorporate appropriate project controls for cost, quality, and scheduling to achieve client objectives.

As Chief Electrical Engineer/ I&C Engineer, I manage a department of engineers and Cadd Technicians to perform all electrical planning and design for power and instrumentation and control design work for the Pentane conversion as a blowing agent for the foam industry. I perform all electrical planning and design for power and lighting systems as well. Summary of Qualifications

Power Engineers

2013-P

Atlanta, Georgia

Principal Engineer

Manage Electrical Engineering group for industrial projects primarily related to the food and beverage industry. Perform electrical power system engineering analysis for short circuit, arc-flash, coordination and equipment evaluations for entire electrical system at various client locations. Engineering design, planning, budgeting & construction administration support to install entire replacement of the medium voltage electrical distribution system at ConAgra plants in Milton, PA and Oakdale, CA.

Engineering design, planning, budgeting & construction administration support to install process cooking, filling, packaging lines for various food and beverage clients. Inspec Group

2012-2013

Atlanta, Georgia

Design Manager

Southeast Operations

Manage the engineering, design, planning scope control and budgets for east coast operations. Engineering Manager for a new fourth production line of grassroots addition to produce certified carbon fiber for aeronautical use. In charge of design, engineering and construction for a confectionery project for Morinaga Foods America in Mebane, North Carolina Lockheed Martin Corporation

2009-2012

Atlanta, Georgia

Senior Electrical Project Engineer

Staff Engineering & Construction NISC-II

Engineering, design, planning budgeting and construction administration support to the Federal Aviation Administration Department of Transportation, National airspace System Implementation Support contract. Level II NISC provides engineering & construction of Air Traffic Control Towers

(ATCT). Terminal Radar Approach Control Facilities (TRACON), Metroplex Control Facilities

(MCF), Air Route Traffic Control Centers (ARTCC) and Remote Controlled Air-Ground Sites

(ACAG), for the Federal Aviation Administration as the Office of Primary Responsibility for the Eastern District of the United States and its protectorates. In charge of design, construction management, engineering, for various infrastructure projects for the Federal Aviation Administration Eastern District and the Department of Transportation nationally. Polysius Corporation.

2006-2009

Atlanta, Georgia

Senior Electrical Project Engineer

Senior Project Engineer for Electrical I/C Engineer for the design and construction of grassroots cement plant addition for American Cement, Florida, and Perform detailed Power System Study, Equipment Purchasing, Instrumentation and Electrical design for new cement plant addition. Senior Project Engineer for Electrical I/C Engineer for the design and construction of grassroots cement plant addition for Texas Industries, New Braunsfels, and TX. Perform detailed Power System Study, Equipment Purchasing, Instrumentation and Electrical design for new cement plant addition Senior Project Engineer for Electrical I/C Engineer for the design and construction of grassroots cement plant addition for Florida Rock Industries, Fl. Perform detailed Power System Study, Equipment Purchasing, Instrumentation and Electrical design for new cement plant addition Senior Project Engineer for Electrical I/C Engineer for the equipment design, and construction of grinding circuit Sag mill, Ball mill facility for grassroots copper mine addition for Rosemont Industries, Pima County, Az. Perform detailed Equipment design and purchasing, Instrumentation and Electrical design for new grinding circuit.

Senior Project Engineer for Electrical I/C Engineering for the design and construction of grassroots cement plant addition for Keystone Cement, Bath, Pa, Perform Equipment Purchasing, Instrumentation and Electrical design for new cement plant addition Global Engineering Services, Inc.

2004-2006

Atlanta, Georgia

Chief Engineer

Executive in charge of all engineering for full service engineering office dedicated to projects in the Western Hemisphere. In charge of P/L for engineering services and all contracts. Control of projects schedule, scope and budgets.

Project Time & Cost

2003-2004

Atlanta, Georgia

Senior Electrical Cost Engineer

United States Department of Energy, Paducah, Ky. and Portsmouth, Oh., Senior Electrical Cost Engineer for detailed U.S. Army Corps of Engineers construction estimate and .constructability review for two nuclear enrichment plants. PII estimating per COE standard formats. Tiernan & Patrylo, Inc.

1997-2003

Peachtree City, Ga.

Project Manager-Senior Electrical Project Engineer Senior Electrical & I/C Engineer for the pentane conversion of polyisocyanuate insulation plants for Johns Manville in Bremen, Indiana; Jacksonville, Florida; and Cornwall, Canada. Design for a grass roots polyisocyanuate plant in Fernley Nevada for Johns Manville. Senior Electrical I/C Engineer for the pentane conversion of polyisocyanuate insulation plants for Atlas Roofing in Diboll, Texas; Northglenn, Colorado; and Camp Hill, Pennsylvania. Senior Electrical I/C Engineer for the pentane conversion of a polyisocyanuate plant in Texarkana, Texas for Celotex.

Project Manager, Senior Electrical I/C Engineer EGO Products, Project Manager for 60,000-sf production plant addition.

William L. Bonnell Industries, Project Manager for the Construction of renovations to the Press 10 and Press 9 aluminum extrusion lines. The project included setting up a separate group for self-performing steel erection.

First United Methodist Church, Project Manager for the Construction of a new fellowship hall and classroom building. Project included demolition of existing structures and attendant abatement for ACM.

SKC, Inc.

1996-1997

Covington, Georgia

Senior Engineer Owner’s Representative

Senior Engineer Owner’s Representative for construction of $360M base film polyester plastic plant. AZTECH Contractors, Inc.

1995-1996

Marietta, Georgia

Project Manager

Project Manager U.S. Army Corps of Engineers, Marietta, Ga. Project Manager for construction of renovations to South Atlantic Division Material Testing Laboratory. Veteran’s Administration, Atlanta, Ga. Project Manager for construction of renovations to psychiatric/psychotic ward of the hospital. Project Manager for construction of new emergency and trauma center.

EMC Engineers, Inc.

1993-1995

Atlanta, Georgia

Chief Electrical Engineer

Chief Electrical Engineer Fort Drum, Syracuse, New York, Senior Electrical Engineer for renovation of base barracks building. William Beaumont Medical Center, El Paso, Texas, Senior Electrical Engineer for remodeling and renovation of the existing facility to gain accreditation. Performed physical needs assessment prior to detailed engineering design work. Fort Hood, Killeen, Texas, Senior Electrical Engineer for replacement of chiller plant for the base barracks facility, flight simulator facility, NCO club and base PX. Blanchfield Army Community Medical Center, Fort Campbell, Kentucky, Senior Electrical Engineer for renovation of buildings B and C including isolation, pharmacy, triage, surgery, and main lobby areas. Fort Riley, Kansas Senior Electrical Engineer for replacement of chiller plant for the building 7210. Khafra Engineering Consultants

1992-1993

Atlanta, Georgia

Chief Electrical Engineer

Chief Electrical Engineer City of Atlanta, Department of Water, Project Manager for the design of the electrical power and instrumentation for improvements to the Chattahoochee Station Water plant. City of Charlotte, Department of Public Utilities, Project Manager for the Architectural and electrical design of a new raw water pumping station in Mecklenberg County, North Carolina. Committee for Olympic Development Atlanta Streetscape improvements projects for International Boulevard including a new park, new street and pedestrian lighting and new traffic signalization. Atlanta Committee for the Olympic Games - Stone Mountain Georgia, Project Manager for the mechanical, electrical and plumbing design for the Cycling and Archery venue. ISES Corporation 1991-1992

Atlanta, Georgia

Project Manager

Argonne National Laboratories, Chicago, Illinois Inspection of facilities on site, assessment of facility condition and preparation of a needs' analysis report for the Chemistry facility, the High Energy Physics Facility, Nuclear Physics Facility, Imaging and Publications Facility. Argonne National Laboratories, Chicago, Illinois Inspection and thermal infrared analysis of the on-site electrical distribution system. Distribution systems of 2.3KV, 5KV and 14.5KV were the subject of analysis. Georgia Institute of Technology, Atlanta, Georgia, Inspection and facility assessment of Skiles Hall for suitability of conversion for Olympic venue activities. George Washington University, Washington, District of Columbia, Inspection and facility assessment of all campus owned housing. Tulane University, New Orleans, Louisiana, Inspection and facility assessment of 22 on campus housing units. The McClier Corporation

1990-1991

Atlanta, Georgia

Project Manager

Lockheed Aeronautical Systems Co. Marietta, Georgia, Project Manager for design and construction of computer center serving the F-22 Advanced Tactical Fighter Program. The computer center housed in nominally 6,600 square feet of raised floor area was constructed to DIAM 50-3 (Defense Intelligence Agency Manual) standards.

Lockheed Aeronautical Systems Co. Marietta, Georgia. Project Manager for transition of equipment, laboratories and programs from California to Georgia. Hydraulic test and material test laboratories were re-established in buildings B-4 and L-7. A 22,500 square foot addition was constructed a building L-9 to house material test laboratories this film and chemistry laboratories. Lockheed Aeronautical Systems Co. Marietta, Georgia Project Manager for replacement and renovation of the building L-11 chilled water plant with the addition of a nominal 680-ton chiller and attendant cooling tower, and replacement of a 446 ton cooling tower. Lockheed Aeronautical Systems Co. Marietta, Georgia Project Manager for expansion and replacement of electrical underground feed network servicing buildings L-11, L-7, and L-9. Attendant expansions of the main substations at L-6 were also affected.

The Austin Company

1982-1990

Atlanta, Georgia

Project Manager

United Airlines, Washington, DC - Project Manager for a new 200,000 SF data processing/reservation center with sophisticated redundant support systems. Communication via satellite, microwave and fiber. United Airlines, Washington, DC, Project Manager for midfield terminal at Dulles International airport, United airlines, Washington, DC, Project Manager for a new Ground Vehicle Maintenance Facility. United Airlines, John F. Kennedy International Airport, NY - Project Manager for the renovation of existing Hangar #4 to accommodate 747-SP 400 aircraft and existing office and service support areas. First Citizen’s Bank & Trust Company, Raleigh, NC - Project Manager for 86,000 SF design/ build bank operations and computer center Bank South Corporation, Atlanta, GA. Design and Engineering Project Manager for the renovation of an existing 120,000 SF building into a bank operations center. Lockheed Space Operations Company, Cape Canaveral, FL: - Senior Electrical Engineer for this 300,000 SF automated storage and retrieval facility supporting the current Space Shuttle Program. American Honda Motor Co. Alpharetta, GA - Project Manager for Rider Education Center for off-road recreational vehicles. The Project included a simulator for motorcycle and ATV dynamic training. Cooper Tools (Lufkin Rule Plant), Apex NC-Project Manager for flammable storage warehouse. The project featured automated guided vehicle system to transfer product to the main warehouse. Barnett Bank, West Palm Beach, FL - Project Manager for design and construction of a regional bank operations center in Palm Beach, Florida. A computer operation within the building core and the facility was supplied with a state of the art security system. The facility also housed proof and warehouse functions for the bank.

Eur-Control USA, Inc.

1980-1982

Atlanta, Georgia

Engineering Manager

In charge of the Engineering and Inside Sales departments for the Western Hemisphere operations of this multinational manufacturing company. Power Products department commodities included combination pressure reducing/desuperheating valves and steam and water desuperheaters. Brown and Root, Inc.

1977-1980

Houston, Texas

Project Manager

Diamond Shamrock Corporation, Deer Park, Texas, Project Manager for a grassroots combined cycle power plant, firing on natural gas and hydrogen fuels with provisions for future number 2-distillate oil fuel.

Oklahoma Gas and Electric Co. Project Manager for wastewater collection, treatment, and disposal facilities for Seminole Steam Electric Station, Horseshoe Lake Steam Electric Station, and Mustang Steam Electric Station, Muskogee Steam Electric Station, and Belle Isle Steam Electric Station. Aluminum Company of America, Project Manager for Warrick Power station Units 1 through 4 firing western coal project included studies and redesign of existing plant facilities for increased efficiencies. Omaha Public Power District

1973-1977

Omaha, Nebraska

Electrical Engineer

Fort Calhoun Nuclear Power Station, System commissioning and subsystem design coordination and interface with consultant and engineering contractors for pressurized water reactor and nuclear steam supply system with a capacity of 1420 Mwt’

North Omaha Power Station, redesign and performance upgrading of existing facility, operational supervision, construction coordination, maintenance, performance testing and interface with consultant engineering contractors for a five unit steam electric station firing western cola. System Load Dispatch Center, Operational supervision performance testing and maintenance of two computer controlled General Electric Frame MS 7000 IC turbines firing natural gas. Education

1972-1977

University of Nebraska

Lincoln, Nebraska

Bachelor of Science, Electrical Engineering

Coursework toward Master of Science, Nuclear Engineering Georgia Institute of Technology

Atlanta, Georgia

Post Graduate Studies, Electrical Engineering-High Energy Particle Physics Annual Coursework for Continuing Education

Professional experience

I have more than 30 years of experience in the engineering and construction industry with more than 12 in project management. I have experiences including management of projects including A&E only and Design/Build projects with EMC Engineers, Khafra Engineering, McClier Corporation, Brown and Root, Inc. and the Austin Company. My international experience in manufacturing with Eur-Control has provided valuable global perspective. My education and experience in electrical Engineering gives me a strong understanding of the complex needs that control, data processing, communications, security, redundancy and support systems place on modern facility programs. Professional memberships

Instrument Society of America - Senior Member

Institute of Electrical and Electronics Engineers - Senior Member Registered Professional Engineer, Georgia, Texas, Kentucky, District of Columbia, Commonwealth of Virginia, Commonwealth of Pennsylvania, Saskatchewan-CDN

Contact this candidate