CURRICULUM VITAE
Tanveer Ahmad
House # ***, Phase V, Defence Lahore – Pakistan
Contact Cell # 033********
E-mail: ac4m5u@r.postjobfree.com, Skype ID: tanpak786
Age: 47 Years
Experience:
24 years
Qualifications:
Masters in Mechanical Engineering
Skills:
Projects Engineering and Execution as per Contracts, Planning and Scheduling, Plant Modifications, Management of Plant Operation and Maintenance, Start-up and Commissioning, Estimation, Techno-Commercial write-ups etc.
1.Pak Arab Refinery Ltd. (PARCO)
The largest fully integrated Energy Company in Pakistan’s Corporate Sector comprising of country’s most modern Refinery (100,000 BPD) and over 2000 kilometers cross-country network of pipelines.
Job Duration: March 31, 2015 till today
Position: Chief Engineer
Develop scope of work for new projects.
Review work packages submitted by consultants, contractors & vendors including design specifications, drawings, contract documents etc.
Progress monitoring of projects and coordinate for their timely completion.
Projects planning & scheduling. Obtain Management approvals for new projects.
Provide support to the Management through techno-Commercial evaluations for various Projects. Attend meetings with European and American Companies regarding study for the installation of 250,000 BPD new Refinery & revamp project for existing 100,000 BPD Refinery.
Coordinate with TSC and HAZOP Teams. Issue monthly progress reports and other documents.
Co-ordinate with other Departments and Organize Presentations for the Management.
Organize Technical Trainings for the Divisional Employees.
Coordinate for timely utilization of yearly approved Revenue and Capital Budgets.
Supervision of execution activities at sites e.g. horizontal directional drilling activities across canals and tie-ins for dia. 26” cross country white oil pipeline network, replacement of pipeline segments and coating works etc.
2.Project Based Assignments from October, 2012 – March 29, 2015
2.1Senior Manager Technical and Design at HWGC: Finalization of 100 MWe coal based Power Plant consisting of 4x125 TPH coal fired high pressure boilers and steam turbines for a sugar mill. Detail engineering and technical support during the manufacturing of bagasse fired high pressure water tube boilers, pressure vessels, heat exchangers, refinery/petrochemical distillation towers, storage tanks, dual media filters, sand filters, RO units, grey water treatment plants, Demineralized Water/ soft water treatment plants, sewage treatment plants, overhead travelling cranes, belt conveyors, sorting conveyors, process piping and steel structure. Installed as per ASME, DN/EN and API Standards.
2.2Engineering Manager: 48,500 M3 LGO Tank and LCO Tank including piping works for Qatar Petroleum.
2.3Project Manager: Oryx GTL Shutdown works (Qatar).
2.4Project Management for the design, procurement and installation of 15 MMCFD Oil & Gas processing Plant for Polish Oil & Gas Company (POGC). It has been successfully commissioned in June, 2013. Plant consists of separators, de-hydration unit, compressors, U-stamped skid mounted package units (three phase and two phase condensate water separators, glycol drain package, slop oil vessel package, water degasser package), storage tanks, piping, API pumps, fire water network etc.
2.5Project Manager for the installation of 26 KM long Ø10” natural gas pipe line for ENGRO Fertilizer Plant. This project has been successfully installed and commissioned within three months.
2.6Design review of HVAC system including plumbing system for water supply and drainage of 13 story building.
3.Fatima Fertilizer Ltd. (FFL)
Job Duration: August 02, 2010 to Oct. 10, 2012
Position: Unit Manager Projects
Lead Projects Engineering and Execution Teams responsible to handle detail engineering and execution activities of projects within plant and outside plant boundary limits.
Reviewed and approved more than 350 detail engineering packages for projects of Urea Plant, Ammonia Plant, Nitric Acid Plant, CAN Plant, O&U area.
Presentation of Projects Unit budget for management approval. Review and approval of material purchase requisitions, comparative statements, work orders.
Meet the execution timelines.
Day to day plant modifications for Urea Plant, Ammonia Plant, Nitric Acid Plant, CAN Plant, Ammonium Nitrate Plant, NP Plant, O&U Area.
All works were executed as per specifications of Kellogg, Kawasaki, CF Brown and UDHE
Arranged the installation of design soft-wares e.g. Auto-Pipe, STAAD Pro, Compress VI for Project Engineers. Obtained Management approvals for technical trainings of Projects Department personnel. Organized the availability of latest design standards (ASME, API etc.) for the team.
Projects handled in Fatima Fertilizer Limited:
S. No.
Project Title
01
Design and Installation of De-humidification System for CAN Plant including 2x Ø12” – 1.8KM long chilled water pipe lines. Project increased CAN production capacity @50 tons per day.
02
Design and installation of Natural Gas compression facility consisting of two Compressors (Cooper Cameron – USA) and Ø 20” piping works, Civil and E&I works
03
Design and installation of five new wells along with Ø12”–4.5 KM long piping for Potable Water of Plant.
04
Design and Installation of 2x75m3/hr. Reverse Osmosis Plant for O&U Area.
05
Installation of Ø48” piping along with 2x5000m3/hr. cooling water booster pumps for CAN and NP Plant
06
Design and installation of Ø4” – 3.4KM long Natural Gas Line from NG Station to the Township of Plant.
07
Laying of 0.3mm thk. HDPE-GEO Membrane in Evaporation Ponds at an Area of 220,000 M2. Completion of civil works for Evaporation Pond # 1, 2, 3 &4. Design and Installation of Ø10”- 950 m long HDPE underground piping at a depth of 10 feet for Evaporation Pond # 1, 2, 3 &4.
08
Design and installation of Ø12” – 1.2KM long Natural Gas Line from NG Station to Ammonia Plant
09
Design of utility lines (IA, PA, LLPS, CW and DW lines) for Plant Handling and Bagging Area
10
Design and installation of Hot Air Blowing System at Urea and CAN Plant bagging area.
11
Completion of Waste Water Piping System for whole Fertilizer Complex.
12
Completion of Chemical Sewage Piping System for whole Fertilizer Complex
13
Design and Installation of Nitric Acid Jerry Cans Filling Facility
14
Design and installation of Instrument Air (IA) Line for Plant Maintenance Shop
15
Design and Installation of Potable Water Line to Plant Canteen
16
Modifications in conveying and bagging systems from Urea Prilling Tower to bagging systems
17
Design and Installation of Gaseous Ammonia System with Piping at CAN Plant
18
Design of urea dissolving system in the urea solution tank
19
Design and installation of Oily Water System at Plant
20
Design and Installation of mechanical piping works for Sedimentation Basin. FRP lining inside the Sedimentation Basin.
21
Design and Installation of Lime Stone Storage Shed, Protection Sheds for RO Plant, Nitrogen Plant etc.
4.MOUCHEL (ENGLAND)
A leading Engineering and Consulting Company of UK, established in 1897. Provide detail engineering and Project Support services within UK, Middle East and for other countries,
Work Location: Hinckley (Leicestershire)
Department: Energy and Carbon Projects
Duration: 20 November 2008 – 26 February 2010
Position: Senior Mechanical Engineer
Responsibilities included the production of conceptual and detail design packages, design calculations for piping, vessels, tanks, scrubbers, heat exchangers, boilers etc. using IGE/TD Standards, ASME/ANSI/ASTM Standards, BS-EN Standards and API Standards, review & approval of drawings prepared in house, review and approval of contractors design packages, technical bid evaluations, preparation of procurement data sheets/specifications and technical proposals, undertake site visits, attend technical clarification meetings with clients and contractors. Acted as a mentor for Junior Mechanical Engineers.
Projects handled in UK:
S. No.
Project Title
Client
01
New LNG Facilities: Review of vendor design packages for LNG Vessels, control valves, safety valves, plug valves etc.
Kuwait National Petroleum Co. (KNPC)
02
New LPG Facilities: Responsible to review tender documents/ project specs., vendor design packages for vessels, piping, valves etc.
Kuwait Oil Tanker Company
(KOTC)
03
Design of Pressure Reduction Installation (PRI) 92.64 -70 barg 50 km long Gas line (Design Calcs., Data Sheets, Design Report).
National Grid (UK)
04
Technical Analysis of 42 KM Long; Ø600 High Pressure Gas Pipeline between Silk Willoughby and Stay Thorpe Power Station
National Grid (UK)
05
Design package for installation of Rotary Separators at Carnforth Compressor Station
National Grid (UK)
06
Best Available Technique Study to Replace Existing Water Bath Heaters at Carnforth and Warrington Compressor Stations
National Grid (UK)
07
Best Available Technique Study to Install LNG Facilities at Manchester
National Grid (UK)
5. Saudi Basic Industries Corporation (SABIC)
SABIC is a global leader headquartered in Riyadh (Saudi Arabia). Manufacture different kind of products for example: chemicals, metals, fertilizers etc. on a global scale in the Americas, Europe, Middle East and Asia Pacific,
Work Location: Jubail Industrial City- Saudi Arabia
Department: Centralized Design Management Department of SABIC
Position: Sr. Mechanical Design Engineer
Duration: 09 February, 2006 – 18 October, 2008
Design Review of a Mega Project in United States of America in 2006
Saudi Arabian Petrochemical Company (PETROKEMYA), an affiliate of SABIC awarded US$ 260 Million Project to an EPC Company named as MUSTANG TAMPA Inc. located in TAMPA – FLORIDA (USA). Responsibilities as a Stationary Equipment & Piping Specialist during stay in USA included the meetings with equipment manufacturers to freeze technical issues as per project specifications, review and comment on vendor design documents, review and comment on Technical Bid Analysis (TBA) prepared by MUSTANG TAMPA. These activities were performed for following equipment’s of Mega Project:
2 x 150 TPH; 110 Bar G; 520ºC VHP Steam, Water Tube Boilers
1 x 400 M3 De-aerator; 01 No. Ethylene Vaporizer; Air Coolers & Air Dryers
Water Treatment Plant for whole Project
02 Nos. High Pressure Instrument Air Buffer Vessels
4 Nos. Storage Tanks each in diameter 28000 mm
HAZOP Study in Poland during June-July, 2007
Al-Jubail Fertilizer Company (ALBAYRONI); an affiliate of SABIC awarded 400 Million Saudi Riyal Urea Prilling Tower Emission Control Mega Project to an EPC Company named as PROZAP Engineering Ltd. located in Pulaway (Poland). As a Lead Mechanical Design Engineer for this project, attended HAZOP Study meetings held in Poland. HAZOP study included crystallization unit, cleaning unit, scrubbers, vessels, tanks, pumps, fans, silencers, piping, ducting, stacks and steel structure.
Mechanical Design Review in Poland in Nov.- Dec., 2007
Review of mechanical & piping design documents prepared by PROZAP for Urea Prilling Tower Emission Control Project during stay in Poland. Reviewed detail engineering documents for tanks & vessels, piping plans, piping isometrics, pumps & fans specifications, drawings for ducting, steel structure and prilling tower exhaust doors.
Major Responsibilities in SABIC:
-Preparation of Front End Engineering Packages for projects of Petrochemical Plants and Steel Plant.
-Review of design packages submitted by EPC Contractors
-Preparation of Technical Requisitions for procurement of project materials.
-Bid technical evaluations for boilers, FRP/SS/CS Tanks, vessels, de-aerators, coolers, heat exchangers, hydrogen generators, water cooled chillers, air cooled chillers, centrifugal pumps, diaphragm pumps, fans etc. during procurement process.
-Design calculations for vessels, tanks, scrubbers, heat exchangers, boilers and piping using ASME/ANSI, BS-EN and API Codes/Standards
-Material selection for vessels, tanks, scrubbers, heat exchangers, piping and ducting at different working conditions.
- For in house projects, drawings review and approval for vessels, tanks, heat exchangers, scrubbers, piping, ducting and steel structure,
-Projects costing and scheduling
Projects handled in SABIC:
For each project appended below, a team of civil, electrical and instrumentation engineers was assigned to support. All of these assigned Engineers were having more than 20 years’ experience in their relevant discipline.
S. No.
Project Title
Plant Name
01
Installation of Ethane Heat Exchanger with Piping
Jubail United Petrochemical Company
02
Installation of HCl Scrubbing System with Piping
Jubail United Petrochemical Company
03
Installation of 100 M3 HCl Tank with Piping
Saudi Arabian Petrochemical Company
04
Installation of Nitrogen Seal Gas Buffer Vessel & Piping
National Industrial Gases Company
05
Reformer Nox Emission Control Unit with Piping
Al-Jubail Fertilizer Company
06
Urea Granular Emission Control Unit with Piping
Saudi Arabian Fertilizer Company
07
Melamine Recovery Vessels,, Tank and Piping
Saudi Arabian Fertilizer Company
08
Installation of Gas Seal Pot with Piping
Saudi Arabian Petrochemical Company
09
600 RT Water Cooled Chiller with Piping
Saudi Iron & Steel Company (HADEED)
10
3x170RT Air Cooled Chillers with Piping
HADEED
11
Installation of 4 Horizontal & 3 Vertical Ladle
HADEED
Pre-Heaters along with Dryers
12
Installation of Air Compressor with Piping
HADEED
13
Installation of Hydrogen Plant with Piping
HADEED
14
Installation of Air Dilution System with Piping
HADEED
15
Inst. of Furnace De-dusting at DR Module A&B
HADEED
16
Installation of DRI Vibro Feeder with hopper
HADEED
17
Installation of Pinch Roller at Rolling Mill
HADEED
18
Installation of Cooling Water System at SP LP
HADEED
19
Oxide De-dusting at Direct Reduction Plant
HADEED
20
Installation of New Oxygen Line at Steel Plant
HADEED
21
Installation of I Ton Jib Crane at FP Shop
HADEED
22
Installation of Pre-Heating Furnace at FP Shop
HADEED
23
Installation of 04 Nos. Centralized Lubrication Systems
HADEED
24
Installation of 04 Air Compressors at DR Plant
HADEED
25
Installation of Lathe Machine at Fitting Shop
HADEED
26
Installation of 20 M3 HCl Tank & Piping at EDP
HADEED
27
Installation of Strand Cutting Machine at LP Shop
HADEED
28
Modification of Run Out Roller Table
HADEED
29
Installation of Sample Carrier Line in LF # 1&2
HADEED
30
Oil Circulation System for Motor Testing
HADEED
31
Up-Grading of Product De-dusting System at DR Mod. C
HADEED
32
Installation of Roll Shop Logo Branding Machine
HADEED
33
Installation of Six Exhaust Fans in SPLP
HADEED
34
Up-gradation of CCP Cooling System
HADEED
35
Up-gradation of Rolling Mill Open Circuit System
HADEED
36
Replacement of Caster Cooling Pipe Lines
HADEED
37
Installation of Robot Table at Bar Rod Mill Roll Shop
HADEED
38
Installation of Testing Machines at New Test House
HADEED
39
Up-gradation of Grease Sys. at Rolling Mill Complex
HADEED
40
DR Mod A & B Fire Fighting Pumps Replacement
HADEED
41
Irrigation Piping System
HADEED
42
Upgrade Guides for Different Stands at Steel Plant
HADEED
43
Add Screw Counter in Stacker Area of Bar Mill 2
HADEED
6. Descon Engineering Limited (Multinational EPC Company)
Work Location: Lahore - Pakistan
Duration : 20 February 1994 – 08 February 2006
Last Position: Lead Engineer Mechanical Design/Deputy Manager
Engineering Manager:
a- Engineering Manager for 2x80 TPH @ 29 BarG, 350+10ºC Bagasse Fired Water Tube Boilers supplied to JDW Sugar Mills (Pakistan).
Contract Value Pak. Rs. 130 Millions.
b- Engineering Manager for 2x80 TPH @75 BarG, 520+10ºC Bagasse Fired Water Tube Boilers supplied to Almoiz Industries Ltd. (Pakistan). Contract Value Pak. Rs. 350 Millions.
c- Engineering Manager for 30TPH @14BarG, 220ºC Water Tube Boiler supplied to Vimpex (Syria)
Responsibilities included the following:
Performed pressure parts design calculations for below listed projects, drawings checking, got approval of pressure parts design packages including design calculations and drawings from recognized third parties i.e. Lloyds (UK), TUV (Germany), HSB (USA), SGS (UK), Bureau Veritas (France) etc.
Sr. #
Project Title
Client
01
2x30 TPH Water Tube Boilers
National Floor Mills - UAE
02
LPG Bowzers
Mass Jordan Company - Jordan
03
CO2 Bowzers
Iraqi Company
04
25 TPH, 17.93 BarG Water Tube Boiler
Assuit Refinery (ASORC) - Jordan
05
80 TPH, 350+10ºC, 29 BarG Bagasse Fired Water Tube Boiler (Design Year 1998-1999)
Jamal Din Wali Sugar Mills – Pakistan ( JDW 1)
06
80 TPH, 350+10ºC, 29 BarG Bagasse Fired Water Tube Boiler (Design Year 1999-2000)
Kohinoor Sugar Mills Limited
07
60 TPH, 360+10ºC, 26 BarG Bagasse Fired Water Tube Boiler (Design Year 1999-2000)
Noon Sugar Mills Limited
08
2x80 TPH, 350+10ºC, 29 BarG Bagasse Fired Water Tube Boilers (2003-2004)
Jamal Din Wali Sugar Mills - (JDW 2)
09
2x80 TPH, 75 BarG, 520+10ºC Bagasse Fired Water Tube Boilers (2005-2006)
ALMOIZ Industries -
10
80 TPH, 460 + 10 ºC, 760 PSIG Water Tube Boiler
National Refinery
11
3x41 TPH, 17.5 BarG Water Tube Boiler
CPC Rafhan Maize Limited
12
10 TPH, 32 BarG Water Tube Boiler
ICI Pakistan Limited
13
22 TPH, 25 BarG Water Tube Boiler
General Tyres Limited
14
05 TPH, 30 BarG Water Tube Boiler
Tri-Pack Films Limited
15
15 TPH, 12.5 BarG Fire Tube Boiler
Nishat Textile Mills
16
15 TPH, 12.5 BarG Fire Tube Boiler
Afroze Textile Mills
17
15 TPH, 12.5 BarG Fire Tube Boiler
US Apparel Textile Mills
18
15 TPH, 20.68 BarG Fire Tube Boiler
United Industries Limited
19
15 TPH, 20.68 BarG Fire Tube Boiler
Zulfiqar Industries Limited
20
2x15 TPH, 14 BarG Fire Tube Boilers
Nakshbandi Ind. Limited
21
05 TPH, 12 BarG Fire Tube Boiler
Merk Sharp & Dome Pvt. Ltd.
22
02 TPH, 12 BarG Fire Tube Boiler
Leather Connection
23
05 TPH, 19 BarG Fire Tube Boiler
Gamalux.
24
04 TPH, 17.23 BarG Fire Tube Boiler
Packages Limited
25
08 TPH, 10 BarG Fire Tube Boiler
Saleem Brothers Mills Limited
26
3.6 TPH, 17.23 BarG Fire Tube Boiler
Roshan Packages Limited
27
08 TPH, 12 BarG Fire Tube Boiler
Afroze Textile Mills
28
05 TPH, 12 BarG Fire Tube Boiler
Coca Cola Industries
29
2x08 TPH, 8 BarG Fire Tube Boiler
Dewan Farooque Motors Ltd.
30
05 TPH, 12 BarG Fire Tube Boiler
Faisal Spinning Mills Limited
31
05 TPH, 15.5 BarG Fire Tube Boiler
Fauji Cereals
32
04 TPH, 17.23 BarG Fire Tube Boiler
Mahr Garments Limited
33
05 TPH, 12 BarG Fire Tube Boiler
Otsuka Industries Limited
34
08 TPH, 12 BarG Fire Tube Boiler
Quetta Textile Mills Limited
35
2x04 TPH, 12 BarG Fire Tube Boilers
Rawalpindi Medical College
36
04 TPH, 12.5 BarG Fire Tube Boiler
Wartsila Diesel – Pakistan
37
15 TPH, 20.68 BarG Fire Tube Boiler
Colgate Industries Limited
38
20 TPH, 12 BarG Waste Heat Recovery Fire Tube Boiler
Master Textile Mills Limited
39
3x1.48 TPH, 19 BarG Duplex Type Waste Heat Recovery Fire Tube Boiler
ICI Pakistan Limited
40
0.748 TPH, 19 BarG Simplex Type Waste Heat Recovery Fire Tube Boiler
ICI Pakistan Limited
41
400,000 IGPD, 03 BarG Water Heater
Liberty Mills Limited
42
Salt Heater
Sitara Textile Mills Limited
43
CO2 Bowzers & Storage Tanks
Khair Enterprises Ltd.
44
LPG Bowzers and Tanks
Ranja Enterprises
45
CO2 Bowzer
Packgas Limited
46
LPG Bowzer
Caltex Limited
47
LPG Bowzer
SHV Energy Limited
48
Knockout Drum
British Petroleum
49
Nitrogen Vessel
OMV Limited
50
Filter Vessels
National Refinery Limited
51
Water Softening Plants
Nishat Textile, Style Textile, Liberty Mills, Mustaqeem Dyeing etc.
52
De-aerators
National Floor Mills, General Tyre, Engro Asahi Polymer etc.
53
HCl Tank
Sitara Chemical Limited
54
LPG Tanks
Pakistan Oilfields Limited
55
Heat Exchanger
Dyno Mills Limited
56
Heat Exchanger
Engro Chemicals Limited
Other Responsibilities:
Piping Plans & Piping Isometrics checking for above Projects
Vendor quotation verification, material specification preparation, issued O&M Manuals for above Projects.
Material estimation from drawings and project technical proposal preparation at bid stage.
Non-pressure parts mechanical design calculations
Suitable material selection for pressure & non-pressure parts using ASME, DIN & BS Standards
Manufacturer Data Certificates preparation
Sales & Marketing Engineer (1997 - 1998)
Sales and marketing, material costing, technical and commercial proposal preparation for following:
Water Demineralization, Filtration and Softening Plants
Boilers (Fire Tube, Water Tube, Bagasse Fired, HRSG’s, Water Heaters etc.)
Power Plants (1-20 MWe), Overhead Travelling Cranes, Belt Conveyors, Pan Conveyors etc.
Construction Manager (1996 - 1997)
Client: American Electric Supply Corporation (AES - USA)
Plant Capacity: 2 x 365 MWe Power Plant
(i) Supervision of Steel Structure, Equipment & Piping Erection, road work, tanks concrete work, building work, cable laying, panels and motors erection
(ii) Training of client personnel on the operation of system. Commissioning & handing over of the project
Projects Co-ordinator (1995 – 1996)
Cement Plant Capacities: 3000 Tons/Day & 5500 Tons/Day
Client: Fauji Cement & Lucky Cement Corporations.
(i) Material take-off from the drawings and indenting
(ii) Material sourcing and comparative statements Preparation
(iii) Co-ordination with production shop and fabrication planning
Design & Estimation Engineer (1994 – 1995)
Designing, material estimation and drawings checking for overhead traveling cranes, belt conveyors, apron feeders etc.
Codes & Standards Knowledge
ASME Section I
ASME B31.4
TRD (Technical Rules for Boiler Design)
ASME Section. VIII Division I
ASME B31.8
AD Merk Blatter
ASME Section VIII Division II
API 620
EN Standards
PD5500, BS 2790
API 650
Pakistan Boiler Code
ASME B31.1, ASME B31.3
ASME Section II Part A & Part D
TEMA
Computer Knowledge
Micro Soft Word, Excel, Power Point etc.
Heat Exchanger Design Software’s
Pressure Vessel Design Software’s (PV Elite & Compress VI)
MS Project, Auto Cad and Auto view
Review and approval of Project Schedules in Primavera (P 6)
Piping Design Software (AUTO Pipe)
Trainings
CDM Regulations in MOUCHEL (UK)
Objectives and Goals Setting in FFL (PAK)
Hazard Analysis and Risk Assessment in MOUCHEL (UK)
ASME Sec. VIII Div. I and Div. II in DESCON (PAK)
Emotional Intelligence in FFL (PAK)
PTW in Oryx GTL (QATAR)
Leadership, Care and Growth in FFL (PAK)
JHA and Working at Height in Oryx GTL (QATAR)
Unleash the Power Within (PARCO - PAK)
Fire Fighting, first aid (QATAR and PAK)
ACADEMIC RECORD
Sr. No.
Degree/Certificate
Year of Passing
Grade
%age Achieved
1
M.Sc. Mech. Engg. (Production Group)
1994 - 1996
18 Months Post Graduate Diploma
Main Subjects: Production Engg, Planning & Control, Human Resource Management
2
B.Sc. Hons. Mech. Engg. (3rd Position in University)
1989 - 1993
A
78.04%
Main Subjects: Machine Design, Mechanical Engg. & Drawings, Industrial Materials, Power Plant, Heat Transfer, Thermodynamics, Quality Control, Hydraulics, Internal Combustion Engines, Refrigeration and Air-Conditioning, Engg. Mechanics, Applied Electricity, Strength of Materials, Numerical Analysis, Applied Mathematics.
3
F.Sc. (Pre-Engg.) (1st Position in College )
1986 - 1988
A
75.27%
Main Subjects: English, Mathematics, Physics, Chemistry
4
SSC (1st. Position in School)
1984 - 1986
A+
84.11%
Main Subjects: English, Mathematics, Physics, Chemistry, Biology