Personal Data
Name
Date of birth
Citizenship/ Gender
Passport No
Fernando Loquias
Dec 12, 1965
Filipino / Male
ECO152457
Education
Bachelor of Science in Mechanical Engineering: Cagayan de Oro College, Cagayan de Oro City, Philippines (1983–1988)
Secondary Education: Mary Immaculate Academy, Jasaan, Misamis Oriental, Mindanao Philippines (1978-1982)
Qualification
BGAS-CSWIP Approval Scheme – Approval held (BG 579098)
Painting Inspector : Grade 2
Expiry Date : September 2022
Safety
Certifications
1.Fall Protection 4. Confined Space
2.H2S Entry 5. Respiratory Protection
3.CPR/First Aid 6. Basic Fire Fighting Awareness Level 2
Feb. 4’16 – Present
JGC-DEC
Jazan, Kingdom of Saudi Arabia
Client : Saudi Arabia Oil Company ( ARAMCO )
Project Undertaken : Jazan Refinery & Terminal Project – EPC 12
Position : QA/QC Coating Inspector
Job Description
To ensure readiness of the QA/QC requirements are met prior to works commences.
To undertake personnel qualification test for blasters and painters.
Responsible for incoming coating/painting materials receiving inspection and to ensure these materials suits the requirement of project specifications.
Review the calibration/validation of Inspection Material Test Equipment items.
Execute painting/coating inspection activities as per Saudi Aramco Typical Inspection Plan.
Check and record environmental conditions prior to start/during the painting and coating operations.
Prepare all necessary QA/QC painting and coating documents and handed over for client/s review.
Mar 10’15- Dec.16’15
Yamal LNG
YAMGAZ
Atlantic Gulf & Pacific Company of Manila, Inc.
Batangas, Philippines
( Seconded of NESGlobal Philippines )
Client : Yamgaz
Project Undertaken: Yamal LNG
Position: QC Painting/Coating/Insulation/Fireproofing Inspector
Job Description
To execute painting/coating inspection work as per company/project specification test plan.
To check or monitor all paintings/coating / insulation / fire protection works related works and ensure all final products meet in accordance with company procedure, client requirement and international code.
Responsible for incoming coating/painting/insulation/fireproofing material inspection and have to ensure whether these materials suits to meet the requirement of project specifications.
Prepare all necessary QA/QC painting/coating/insulation/fireproofing documents and handed over to client review.
Review of all calibration inspection equipment.
To undertake test/review qualification for spray painters, brush painters, abrasive blasters & credentials of insulation and fireproofing craftsmen.
Jan 2013 – July 2014
Qatar Liquified Gas Company, Ltd.
Ras Laffan Industrial City, Qatar
( Seconded of Air Resources Qatar )
Project Undertaken :QG1 - Plateau Maintenance Project
Position : PMT - Painting/Coating & Insulation Inspector
Job Description
Witness and control Quality all aspects of painting and insulation activities for pipings, equipment and structures to ensure that they are consistent with project specifications, procedures and relevant international codes and standards.
Performs routine surveillance of assigned areas to ensure compliance with applicable codes, standards, specifications and drawings. Closely monitors surveillance activities to ensure compliance to agreed plan.
Ensure regular and timely response to contractor raised RFI’s to witness and verify technical inspections and materials testing as required by ITP’s and AFC Drawings.
Closely cooperate with Project Management Team/HSE departments in order to ensure work is being performed in a safe manner and within the schedule by promoting pro-active approach.
To maintain good relationships with contractors, being relatively flexible, proactive but also strict when necessary to achieve the objectives of the project.
To ensure that safety remains the main priority on the construction site at all times.
Apr. 2011 – Jan 2013
GS E & C Corporation
Ruwais, Abu Dhabi, United Arab Emirates
Project Undertaken : Ruwais Refinery Expansion Package 2
Client : Abu Dhabi National Oil Company (Takreer)
Contractor : GS E & C Corporation
Position : QC Inspector – Painting/Coating & Insulation
Job Description
Monitor quality of the blasting, coating, zinc galvanizing, insulation and fireproofing works.
Work with Mechanical and Piping Field Engineers to identify the upcoming releases for insulation.
Hot dip galvanizing coating inspection in galvanizing plant.
Monitor insulation releases for completion..
Ensuring the quality and progress of the work and the strict adherence to company and contractor procedures and specifications.
Ensuring that the work scopes are carried out to the highest HSE Standards.
Ensuring that the ITP’s of coatings, insulation & fireproofing activities are carried out & reviewing the reports.
Ensuring that the correct specifications are being worked to.
Providing weekly progress reports to Lead Inspector
Participating in technical queries and follow through for responses
Providing technical support to the project on surface preparation, coating and insulation activities.
Sept. 2009 – Dec. 2010
Pipeline
Induction Heat
Bureau Veritas Angola
Luanda, Angola
Project Undertaken : Jubilee Deepwater Development for Ghana
Client : Jubilee
Project Undertaken : Block 17 Pazflor
Client : Total E & P Angola
Project Undertaken : Block 31 North East Development PSVM
Client : BP Exploration Angola
Contractor : Angoflex (A Sonangol-Technip Association)
Position : Coating Inspector
Job Description
Material inspection, verify certifications for consumables & inspection equipment’s calibration certificates.
Responsible for ensuring that specification for surface preparation & coating application comply with the project specification for painting/coating documents.
Adherent to safety practices
Monitor the coating application of Fusion Bonded Epoxy ( FBE ), 3 Layer Injection Molded Polyurethane ( IMPU ), Chemically Modified Polypropylene ( CMPP ), 3 Layer Polyethylene ( 3LPE ), Heat Shrink Sleeve ( HSS ) & Flame Spray Polypropylene on Field Joints Coating ( FJC ).
Make random audit report for every production operation – temperature reading for the application & monitor environmental condition.
Submit all data obtained for recording & reporting.
Jun 2008 – May 2009
Saudi Arabian Saipem Ltd.
Khurais, Kingdom of Saudi Arabia
Project Undertaken : Khurais Crude Facilities-Gas and Oil Separation Plants
Client : Saudi Aramco
Owner : Saudi Arabian Oil Company
Position : QC Inspector - Coating
Job Description
Familiarize all Saudi Aramco standards and procedures with regards to corrosion controls and assets preservations.
To conduct qualification test for application personnel as required.
To check randomly on abrasive use & inspection equipment calibration certificates.
Monitor the surface preparation and coatings application for random pipes, pipes spools and steel structures.
Conduct random dry film thickness reading on coated pipelines & steel structures surfaces.
Conduct surveillance for the surface appearances of columns, vessels, exchanger and other equipment prior to final installation at site and submit reports.
Inspection and acceptance to buried and above ground pipelines base on test packages released to include inspection and acceptance of insulation works for vessels, columns, pipelines and equipment for its heat conservation, temperature control and personnel protection as per required.
Recording and reporting for the data obtained.
Providing problem free, cost effective solutions for the corrosion related problems.
Sept. 2006 – May 2008
Consolidated Contractors International Company
Ras Laffan Industrial City,
State of Qatar
Project Undertaken : Ras Laffan Onshore Expansion Project Phase 2
Client : Chiyoda-Technip Joint Venture
Owner : Ras Laffan Liquified Co.,, Ltd
Position : QC Inspector - Painting
Job Description
Provide coating inspection services in accordance to British Gas standard & ensure that the project specification must be followed.
Painting of raw materials from 1/2" to 132" diameter pipes with approximate total area = 1.2 million square meters.
Inspection of coating materials.
Inspection of raw materials before, during and after surface preparation works.
Checking of coating application works.
Monitor environmental conditions.
Check surface profiles of blasting abrasive used and record it.
Conduct adhesion testing of applied coating materials and submit report.
Conduct inspection on underground pipelines installations for cooling water supply and return.
Conduct inspection on site blasting and painting as per test packs with respect to limits.
Ensure by inspection vessels, columns, exchangers and related equipment in good appearance as per specification.
Jan. 2006 – Aug. 2006
EEI CORPORATION
#12 Manggahan Street,
Bagumbayan, Quezon City, Philippines
Project Undertaken : Pil Kao, Inc. - P20 - 2 Project
Client : Sankyu Construction Phils., Inc.
Owner : Pil Kao, Inc.
Position : Field Engineer- Painting and Insulation
Job Description
To oversee all vital information for which the whole operation governs.
To coordinate to subcontractor all necessary undertakings day by day.
To monitor the surface preparation and coatings application checked correct mixing followed.
To checked pipe spools and random pipes priorities with all the details of paint coding system prior to feeding to auto blast machine.
To have the knowledge to use some painting instrument on occasion needed most.
To record day by day output on primed pipe spools and random pipes coated with Sigma coatings.
To do site inspection on newly erected pipelines, area by area, checked abrasions and advice to subcontractor to do spot repairs and touch ups.
To monitor the surface preparation and painting of field weld joints after releasing from testing departments.
To attain supervisors meeting and raise some points advantageous to company's smooth flowing project.
May 2004 – Oct. 2004
MAN FERROSTAAL - OIL AND GAS DIVISION
Marsa El Brega, Libya
Project Undertaken : Gas & Liquid Recovery Unit Modifications
Client / Owner : Sirte Oil Company
Position : Painting Inspector
Job Description
To gather information on coatings standards and specifications
To coordinate with all parties concerned.
To monitor surface preparation and coatings application on steel structures and pipelines.
To request for inspection to client painting inspection after any surface preparation prior to application.
To assure correct mixing procedure is followed
To check dry film thickness of fully cured paint film prior to final inspection by client painting inspector so simultaneously every coatings application thereafter.
To supervise all touch ups and spot repairs on abrasions and burns due to erections and hot works.
To prioritize high heat pipeline on painting prior to insulation.
To check deliveries and have accounted for.
To prepare daily painting report and have signed to designated authorities.
To submit all documents after painting inspection completed.
May 1996 – Nov. 2003
Dutch Boy Philippines, Inc.
Dasmariñas, Cavite, Philippines
(Ameron Protective Coatings under licensed exclusive manufacturer)
Position : Technical Service Representative
Job Description
To maintain technical presence on site.
To gather information and details on the possible project.
To ensure good surface preparation and application.
To submit proposal and system suitable of industrial and marine environment
To help prevent costly complaint investigations by giving right and reasonable coating system
To check dry film thickness in every coatings completion
To submit all necessary reports.
Nov. 1993 – May 1995
CORD CHEMICALS, INC.
Mandaluyong City, Philippines
Position : Technical Service Engineer
Job Description
To monitor constantly accounts and end user.
To assures good surface preparation and application on marine painting projects.
To monitor proper application on file splicing, epoxy, bonding, and epoxy grouting to industrial accounts.
Aug. 1991 – Nov. 1993
RJS CONSTRUCTION & DEVELOPMENT CORPORATION
Davao City, Philippines
Devoe Coatings Exclusive distributor
Position : Technical Engineer
Job Description
Technical inspector on various marine and industrial projects within the region
To submit coating system and proposal to end user if necessary
To submit report after every project finished.
Jan. 1990 – Dec. 1990
PHILIPPINE IRON CONST’N & MARINE WORKS, INC.
Jasaan, Misamis Oriental
Position : Project Engineer
Job Description
To coordinate to owner’s representative of ship’s job orders.
To conduct ultrasonic gauging on hull other specified areas after dry docking.
To monitor hot works on deteriorated areas need to be replace and repair at hull, decks and engine room areas.