Customer Service System
Resume:
CURRICULUM VITAE
of
MR. RAINERIO C. TABIOLA
Permanent Address : Noli Bayugan Agusan Del Sur,
Philippines
Mobile Number : +639*********/+639*********
E-mail Address : *****************@*****.*** /
**********@*****.***
POSITION APPLIED : HEAVY EQUIPMENT MECHANIC
Career Objective: To get employment which can provide me the opportunity and chance to apply my current skills, knowledge as well as my ability and eventually could enhance my capability and thereby can provide quality delivery of heavy equipment mechanic related services to various customers/clients where I am working with.
STRENGTHS/TECHNICAL QUALIFICATION
A)18 Years Diversified experience in Diesel and Heavy Equipment Mechanic
B)Certified Automotive Servicing (National Certificate Level I)
C)Certified Automotive Servicing (National Certificate Level II)
Certified Automotive Mechanic (National Certificate II) – Certification is issued by TESDA for passing the competency assessment that would further certifies that I am Competent to perform on the following automotive related competencies (the coverage of the assessment are as follows)
1.PARTICIPATE IN WORKPLACE COMMUNICATION
a.Obtain and convey workplace information
b.Participate in workplace meetings and discussions
c.Complete relevant work related documents
2.WORK IN TEAM ENVIRONMENT
a.Describe team role and scope
b.Identify own role and responsibility within team
c.Work as a team member
3.PRACTICE CAREER PROFESSIONALISM
a.Integrate personal objectives with organizational goals
b.Set and meet work priorities
c.Maintain professional growth and development
4.PRACTICE OCCUPATIONAL HEALTH AND SAFETY
PROCEDURES
a.Identify hazards and risks
b.Evaluate hazards and risks
c.Control hazards and risks
d.Maintain OHS awareness
5.PERFORM MENSURATION AND CALCULATION
a.Select measuring instruments
b.Carry out measurements and calculation
c.Identify and access manual/ specification
d.Maintain measuring instruments
6.READ, INTERPRET AND APPLY SPECIFICATION AND
MANUALS.
a.Interpret manuals
b.Apply information in manual
c.Store manuals
7.MOVE AND POSITION VEHICLE
a.Prepare vehicle for driving
b.Check the vehicle
c.Move and position vehicle
8.APPLY APPROPRIATE SEALANT/ADHESIVE
a.Identify appropriate Sealant/adhesive
b.Store/Dispose of sealant/adhesive
c.Apply sealant/adhesive evenly
d.Prepare surface for Sealant/adhesive
9.PERFORM SHOP MAINTENANCE
a.Inspect/clean tools and work area
b.Report damaged tools/equipment
c.Dispose wastes/used lubricants
d.Store/arrange tools and shop equipment
10.PERFORM DIESEL ENGINE TUNE UP
a.Set injection timing
b.Install injection pump to engine
c.Inspect injection Timing
d.Bleeding injection system
e.Components
f.Conduct compression testing
11.PERFORM GAS ENGINE TUNE UP
a.Check/Adjust tappet valve clearance
b.Inspect/test spark plug
c.Check/replace fuel filter and air cleaner
d.Conduct compression test
e.Test /adjust dwell angle and ignition setting
f.Adjust engine idle speed and mixture
g.Check advance mechanism and adjust ignition timing
h.Inspect/replace contact point condenser
12.SERVICE AUTOMOTIVE BATTERY
a.Test automotive battery
b.Remove and replace batteries
c.Jump-start vehicle.
d.Service and charge batteries.
13.SERVICE IGNITION SYSTEM
a.Check Ignition System
b.Perform spark test
c.Check ignition coil resistance
d.Check ballast resistor
e.Adjust contact point clearance (if any)
f.Repair non-electronic ignition system and/or
components
g.Perform ignition timing
h.Perform ignition wiring installation
14.TEST AND REPAIR WIRING/LIGHTING SYSTEMS
a.Test electrical systems
b.Repair electrical systems
15.PERFORM UNDERCHASSIS PREVENTIVE
MAINTENANCE
a.Check clutch fluid and lines
b.Inspect brake system
c.Inspect/change transmission/ differential gear
oil
d.Check under- chassis body bolts and nuts
automatic transmission fluid
e.Check/Re-fill
f.Inspect/Bleed air tank.
g.Check tires and tire pressures
h.Inspect/Replace power steering fluid
16.SERVICE STARTING SYSTEM
a.Repair starting systems associated components
b.Test system/ components and identify faults
17.SERVICE CHARGING SYSTEMS
a.Test system/ components and identify faults
b.Repair charging system associated components
18.SERVICE ENGINE MECHANICAL SYSTEM
a.Service cooling system
b.Service lubricating system
c.Service fuel system
d.Service diesel fuel injector
19.SERVICE CLUTCH SYSTEM
a.Diagnose clutch failure/problem
b.Pull-out and mount clutch Component parts
c.Overhaul hydraulic clutch mechanism
d.Perform clutch parts failure analysis
e.Bleed clutch hydraulic system
f.Set/Adjust clutch system components
20.SERVICE DIFFERENTIAL AND FRONT/REAR AXLE
a.Inspect drive shaft and join
b.Dismount differential assembly
c.Overhaul differential
d.Mounting differential assembly
e.Inspect/replace I-beam
f.Analyze king pin condition
g.Overhaul rear/front wheel hub
21.SERVICE MANUAL STEERING SYSTEM
a.Analyze front end geometry failure
b.Conduct wheel alignment
c.Perform wheel balance
d.Service steering system
22.OVERHAUL MANUALTRANSMISSION
a.Diagnose manual transmission failure
b.Pull-out manual transmission
c.Road test
d.Inspect manual transmission parts
e.Assemble manual transmission
f.Test manual transmission
g.Disassemble manual transmission
23.SERVICE BRAKE SYSTEM
a.Pull-out/mount brake system components
b.Conduct road test
c.Disassemble/assemble brake system components
24.SERVICE SUSPENSION SYSTEM
a.Diagnose suspension system failure
b.Inspect/replace suspension component parts
c.Disassemble/ Assemble suspension parts
d.Dismount/mount suspension components parts
D)Computer Literate
E)AVAILABILITY OF OTHER RELATED EMPLOYMENT DOCUMENTS :
ØPASS Port issued on July 11, 2015
ØPass Port # EC4624648
ØCertification of previous and current employment
ØCompetency Assessment Certification (Automotive Servicing NC & NC
II)
ØDiploma/TOR and other Related Training Certificates
ØNBI Clearance
TECHNICAL WORK EXPERIENCE AND EXPOSURE
Company : Petroleum Chemicals And Mining Company
Limited(PCMC)
Address : Jubail, Saudi Arabia
Position : Heavy Equipment Mechanic
Date : May 18,2007- April 29, 2017
NATURE OF DUTIES AND RESPONSIBILITIES MAY INCLIDE BUT NOT LIMITED TO:
ØOverhauling engines: In-Line Engine, 4 Cylinders Engine, 6 Cylinders Engine, Acer t Engine (C9, C15, C18, C12, C13)(3066, 3116, 3126) V Type Engine, V8 Cylinder Engine, V10 Cylinder Engine, V12 Cylinder Engine, Like Caterpillar, Komatzu, Mercedes Benz model #: 3838,Man & Isuzu.
ØOverhauling and Repairing Various Engine Like :
Caterpillar /Bulldozers, model #: D6M, D6N, D8L, D6R
Caterpillar /Excavators, model #: 320B, 320C, 318C, 330C, 385c, 245B, 375B,
365C
Caterpillar/Wheel Loader, model #: 938G, IT38G, 938G series II, 950E
Caterpillar/Soil Compactor, model #: CB-214E, CP-533C CP-573E
Caterpillar/Motor Grader, model #: 120H
Komatsu /Motor Grader, model #: GD705R-2, GD611A-1, GD661A-1
Komatsu /Bulldozer, model #: D135, D-53P
Komatsu /Wheel Loader, model #: WA320
Dynapac-/soil Compactor. Model #: CA-250
Caterpillar/ articulated, model #: 735, Engine # C15
Man Damp Truck, model #: FE40-370, Engine # D2866
Mercedes Benz Dump Truck, model #: 3838, Actros model #: 4040 (Dump Trucks, Transit Concrete Mixers, Water Tankers and Thriller like Low Bed and High Bed)
ØPerform Fuel Rack Setting and Adjusting of Fuel Injector /MUI engine(3116 and 3126 engine) by Using Digital Indicator/Fuel Setting Tool Group.
ØPerform Engine Top Overhaul/Repair and Recondition of Cylinder Head.
ØPerform Transmission Overhauling and Repair of Dump Truck like Mercedes Benz, Man, Mitsubishi and Isuzu.
ØDis-assemble/Assemble and Re-Seal of Hydraulic Cylinder Like Boom Cylinder, Stick Cylinder, Bucket Cylinder of Excavator.
ØDis-assemble/Assemble and Re-Seal of Hydraulic Cylinder Like Lift Cylinder, Angle Cylinder, Tilt Cylinder of Bulldozer.
ØPull-out /Dis-assemble/Assemble and Re-Seal of Track Adjuster Such as Bulldozer & Excavator.
ØPerform Transmission Overhauling and Repair of Bulldozer, Loader and Grader such as Caterpillar & Komatzu.
ØDiagnose and Perform Trouble Shooting of Malfunction Hydraulic System.
ØDis-assemble/ Assemble and Re-Sealing of Swing Motor of Excavator.
ØDis-assemble / Assemble and Re-Sealing of Control Valve Such as Bulldozer & Excavator.
ØPerform Overhauling of Hydraulic Pump.
ØPerform Testing and Adjusting of Hydraulic System by Using Pressure Gauge and Adjust the Main Relief Valve to Specified Pressure.
ØPerform Repair / Maintenance of Under Carriage Such as Bulldozer & Excavator.
ØPerform Preventive Maintenance Service of Engine and Equipment & Attachment.
ØPerform Trouble Shooting and Diagnose to Determine the Trouble.
ØPerform Visual Checking of the Condition of the Equipment and Machinery.
ØPerform Inspection and Evaluation of Under Carriage.
ØPerform Inspection and Evaluation of Bucket System.
ØChecking Parts number in the Parts book in Order spare parts
ØResponsibilities for Diagnosing of Repair, which Require Minor and Major Troubleshooting to Avoid Back Job.
ØPerform Trouble Shooting for Engine Overheating/ Cooling System
ØPerform Diagnose of Engine Performance,
ØPerform Checking and Adjusting the Intake /Exhaust Valve to Specified Clearance
ØPerform Repair and Maintenance of Different Types of Light Vehicle and Light Trucks. (Car, Pick-Up, Elf and Forwards)
ØSafekeeping of All Dismantled Spare Parts for Easy Location.
ØPut Tag for Easy Identification.
ØDismantling of Engine and Prepare for Inspection and Evaluation of Spare Parts and Materials.
ØPerform Trouble shooting & Repair Minor Electrical Trouble.
Other Duties/Responsibilities Perform with:
ØParticipate in workplace communication
ØWork in team environment
ØPractice career professionalism
ØPractice occupational health and safety procedures
ØDevelop and update industry knowledge
ØObserve workplace hygiene procedures
ØPerform computer operations
ØPerform workplace and safety practices
ØProvide effective customer service
Company : Kenneth Builders Development Inc.
Address : Marasbaras,Tacloban City
Position : Heavy Equipment Mechanic
Date : June 12, 1995 to March 2006
NATURE OF DUTIES AND RESPONSIBILITIES MAY INCLIDE BUT NOT LIMITED TO:
As service center skilled worker, I was exposed to perform the following tasks in auto mechanic and heavy equipment mechanic(dump truck, fork lift, payloader, excavator & other heavy equipment)and from among the cars that I am acquainted most in troubleshooting as far as auto electricity and auto mechanic are concern are all types of cars specifically to all Korean cars (Kia and Hyundai brand of cars), TOYOTA Corola,TOYOTA bios, MITSUBISHI Lancer, Volkwagen, Opel FORD Scort, NISSAN Sentra, SUZUKI Vitara, MAZDA 323 and
other not mentioned brand of cars:
ØProvide customer service efficiently and effectively
ØPerform Hydraulic Servicing and Heavy Equipment Operation
ØPerform Heavy Servicing/Repair and Trouble Shooting (Dump
(Truck, Fork Lift, Pay Loader, Excavator and other heavy equipment)
ØPerform Wheel Alignment (Light and Heavy)
ØProvide customer service efficiently and effectively
ØTroubleshoot/Install auto wiring connection
ØPerform Diesel Engine Tune-up
ØPerform Gas Engine Tune-up
ØService Automotive Battery
ØTest and Repair Wiring/Lighting System
ØPerform Underchasis Preventive Maintenance
ØService Starting Battery
ØService Charging System
ØService Engine Mechanical System
ØService Clutch System
ØService Differential and Front/rear axle
ØService Steering System
ØOverhaul Manual Transmission
ØService Brake System
ØService Brake System
ØService Suspension System
Seminar / Training / Achievements / Certification Information
1)Actros Basic Introduction And maintenance Training -
Juffali company(Mercedes) – NLGT –
Completion of training certificate
2)TESDA – Diesel Mechanic - Completion of training certificate
Career related skills
ØLicensed driver of motorized vehicle both manual and automatic
ØHeavy Equipment basic operation
ØUsing computers and software related to machines and engines maintenance
ØCan lead the work
Contact this candidate