Resume

Sign in

Quality Control Manager

Location:
Austin, Texas, United States
Posted:
September 30, 2017

Contact this candidate

Resume:

SAMIUDDIN KHAJA

Austin, TX *****512-***-**** / 512-***-**** • ac2jbg@r.postjobfree.com

Skills

●Extensive experience in routine inspection; testing incoming fabricated parts, components and assemblies. Also inspection in wiring harnesses and custom control panels.

●Hands on experience with PCB’s, soldering through hole, components, polarity and surface mountings such as IC’s, resisters, transmitters, BIOS chip and connecters. Also familiar with electrical wirings, soldering and polarity.

●Performing inspection of PCB’s and surface mounting components and motherboard and chasis. Electronic units such as transmit radio units and signal receiving units.

●Expert in inspection techniques and sampling plan like AQL and MIL standard industry workmanship practice.

●Exceptional knowledge of electronic components, manufacturing procedures and techniques of electronic manufacturing standard. (IPC-A-610), such as PCB and motherboard, Chassis and graphics card and video card.

●Performed incoming inspection on manufacturing materials and products from vendors to inspect work-in process and finish goods products.

●Troubleshoot the root causes of discrepant material with help of engineering drawing specifications and other technical documentation then suggest corrective action.

●Ensured that corrective measures are met acceptable reliability standards and that documentation was complaint with requirements.

●Prepare inspection reports including discrepant material reports and weekly incoming inspection summary reports.

●Hands on experience with training devices; such as micrometer dial gauge caliper, depth gauge, OD and ID caliper, rock well hardness tester, welding gauge, Elcometer and coating thickness gauge, Techniques of Aluminum Die-casting and its secondary operation of die-casting products.

●Performs inspection of fabrication sheet metal and structural welding works using NDT level – II (PT, RT, MT and UT).

●In depth knowledge of mathematics, fraction, decimal and percentage with solid understanding of GD&T (for Blueprint interpretation).

●Expert in inspecting 1st article inspection using Gauge Block, V. Block and different instruments and tools.

Objective

To seek a position of Quality Control Inspector or Assembling, Testing inspection technician in one of the best organizations with a view to utilize my wide expertise of 10+ years in Manufacturing and Service Industry for the benefit and growth of the organization.

Work Experience

Cypress Industries Austin / Athena MFG. Co Dec 2016 – July 2017

Q/C Inspector

Working as an inspector of first article products. And inspection of production line and assembly and final inspection of product and passing Q/C tags for shipment. And vendor receiving inspection and testing custom cables, highpot test, electrical energy consuming test, and cable eye test. Also all inspection of wiring harnesses, custom control panel boards, P.C.B’s, LED P.C.B’s and receiving inspection in all metal parts and plastic molding parts. The inspection of fabrication sheet metal works, Aluminum Die-casting parts and machining parts. The assembly of Chassis and sub assembly and secondary operation. Also the inspection of the phosphating process and the inspection of powder coating and wet paint coating shop. And the inspection of zinc plating fabrication parts as per ASTM standard.

Illumitex Lighting Solutions INC, Austin Aug 2015- Nov 2016

Assembling & Burn-in-Test Technician

Working as an assembling L.E.D lighting fixtures technician. Such as Architectural lighting, Harvest power lights, Horticulture Lights, Commercial & Industrial lights etc. Burn-in-Test performing as per procedure of QC engineering design with L.E.D high technology.

Corvalent Industrial Motherboards Manufacturing,Cedar Park,TX March 2015 – July 2015 QC/QA Inspector

Receiving inspection of electronic components such as a mother board, baby board, PCB assemblies and chasis, system assembly. Electronic video card and plash card & tablets and all surface mounting components. Soldering all PCB components and final inspection of assembling units and QC pass tag for shipment.

Benchmark Electronics Inc., Austin, TX Sept 2014 – Dec 2014

Assembling & Testing Technician

Working as an assembling and testing technician taking care of Quality assurance, data logging on the Production floor. Performed line inspection on floor PCB board and its surface mountings components, and PCBA assembly and final assemble of Motherboards and chassis. Actively involved in testing Transmit Radio Units, Intelligent Node Unit (INU), and Signal Receiving Radio System Rack. Assembling and testing flash memory cards.

Flextronics MFG co., Austin, TX Sept 2013 – Jul 2014

QC/QA Inspector

Performed inspection on all Cisco company products like CRS-1, CAT6K, STARENT and sister companies like Islion, Data Domain & Aviat.

Actively involved in inspection of system rack of Aviat product and spares like RFU, INU, ODU units Testing. Performed line inspection on floor PCB board and its surface mountings components, and PCBA assembly and final assemble of Motherboards and chassis. Inspected soldering process of components mountings on PCBA as per electronic code IPC-A-610 final QC pass tags for shipments.

Mobile Gas Company, Deer Fill Beach, FL Feb 2009 – June 2013

Assistant Manager

Prepared purchase orders, receiving all purchase order material and merchandises. Supervised routine maintenance of fuel pumps and its auxiliaries with handling cash register.

Hoer Beiger Co. Inc., Pompano Beach, FL Nov 2007 – Jan 2009

Quality Control Technician

Inspect and approve the production of oil seals and rings using 1st piece shop floor inspection of different materials such as copper, fiberglass and other metals from machine shop. Performed both Dimensional inspection, flatness inspection and concentricity of oil seals.

PTE Strand Company Inc., Miami, FL Jan 2007 – Oct 2007

Assistant to Q.C. Engineer

Inspected slab designs forces, frictional losses and their elongation forces. CGS, and profiles, callouts, hairpins, geometry stress, log reports, checking post tensioning slabs, post tensioning cables (uniform and banded cables), final inspection at floor and QC pass tag for post tensioning cables using Final inspection procedure like ASQ, AQL, MIL – STD and Q.C. Pass Tags for shipment.

Steel Omega Pole Factory Co. Ltd., Saudi Arabia Jan 1998 – Nov 2006

Quality Control Inspector

Performed 1st piece shop floor inspection and approval of product, monitoring inspection of each production line, submerged Arc welding inspection of black shaft steel pole. Inspecting visually, dimensionally and giving instruction regularly to die setup person using final inspection procedure like ASQ, AQL, and MIL-STD. The steel black soft of welding is inspected by using dye penetration test, galvanizing and checking galvanizing thickness of steel pole and checking stamping other products as per required BS and ASTM standard and final inspection and Q.C. pass tags for shipment.

Golden Star Co. Inc., Saudi Arabia Jan 1996 – Dec 1997

Manufacturers of Split Unit of Air Condition Factory

Quality Control Inspector

Performed 1st piece floor inspection, secondary operation inspection and final assembly unit inspection. Completed unit tests as per specification and required loads test, final inspection and Q.C. Pass Tags for shipment.

Factory Hindustan Steel Metal Fabrication Co. Ltd., India Jul 1980 – Dec 1995

Quality Control Inspector

Performed 1st piece floor inspection at different bending processes and checking dimensionally and checking the welding defects and welding cracks by using dye penetration test and final inspection and Q.C pass tags for shipment.

Asbestos Factory Ltd., India Jun 1974 - Jun 1980

Quality Control Inspector

Performed inspection of incoming materials and follow the production line giving regular instruction to setup person. Checking production line, identify discrepant products and issued corrective action. Final inspection and execute product with QC pass Tag.

Education & Certificates:

Certified IPC-A-610 Dec 2013

Certificate of Seminar

ISO 9000 Quality Management System, Saudi Arabia 2002

Certificate of AutoCAD, India July 2000

Qualified NDT (Non-Destructive Testing) level II

(PT, RT, MT and UT)., India 1997

Certificate of

Quality Control Statistical Process System, Chicago, IL 1993

Diploma in Mechanical Inspection Jan 1992 – May 1993

Chicago Quality Industrial Institute, Chicago, IL

Diploma in Licentiates Mechanical Engineering Jul 1971 – Mar 1974

Govt. Polytechnic College, India

References available upon request

Samiuddin Khaja

9036 N Lamar Blvd

Apt 266 Austin, TX

Tel 512-***-****/ 512-***-****

To

The Recruiting Manager

Dear Sir,

I feel pleasure to submit my application of the position of Quality Control Inspector / Quality Control Technician opened and advertised in the internet of .

I hope my qualifications and experience would match the needs of the position in your organization and credentials will be given due consideration. I am interested in working in your discipline and I believe that my varied experience and abilities would be an asset to you esteemed organization. Please find enclosed my résumé for your kind consideration. I am looking forward to be a positive response from you soon. Thank you.

Yours sincerely,

Samiuddin Khaja Samiuddin Khaja



Contact this candidate