Electrical Engineer Project

ANGELITO J. PIDOR

Bliss, Buug, Zamboanga Sibugay

Mobile Phone No.: +639********* /+639*********

email address : *******@*****.***

POSITION DESIRED

Senior Electrical Engineer

(Senior Electrical Inspector)

PROFESSIONAL STRENGTHS

To enhance and impart my knowledge in construction with respect to engineering discipline and to deliver my capabilities to do work in accordance with engineering standard and principles as well as to develop and establish good relations to my colleagues and to the company as a whole.

SUMMARY OF EXPERIENCE

With more than (14) years of relevant experience in the field of Electrical Engineering earned from various firm primarily engaged in Construction Supervision, Consultancy Services and Testing/Commissioning as per approved shop drawing subject for approval with local regulations and approved specifications. Previously involves in different types of projects like Power Plants and Substations, Fire Alarm/Detection and Security Systems, Mining Electrical works and familiar with preparation of CAPEX & OPEX for project budget cost. Knowledgeable of using AutoCad drawing software, capable of reviewing shop drawings and material submittals in reference to construction drawings and project specification.

TRAININGS AND SEMINARS

Basic and Advanced Computer Aided Design, Advanced Technology and Solution, Regional Youth Center Foundation, Zamboanga City - July 1, 1991 to January 25, 1992

Over Current Protection, Western Mindanao State University, Zamboanga City - March 27, 1992

On Job Training (Switchboard Operation & Transmission Line Maintenance, Sta. Clara Substation, National Power Corporation, Zamboanga del Sur - January 31, 1994 to June 30, 1994

4th IIEE Regional Convention - Region VII, IIEE - Iligan Bay Chapter, Iligan City - October 11-13, 1996

1st Joint IIEE Mindanao Regional Conference (Region VIII &IX), IIEE Butuan Chapter, Butuan City - August 20-22, 1997

Governors Concept and Application The Millennium Bug – Y2K, IIEE Iligan Bay Chapter, Iligan City - April 17, 1999

Illumination Level Design and Calculations of Fiber Optics-Introduction of Computer Assembly Workshop, IIEE Western Region Chapter, Jeddah, Kingdom of Saudi Arabia - June 7, 2002

Retrofitting of Motor and Variable Speed Drives Basic Electrical Safety Tips, IIEE Western Region Chapter, Jeddah, KSA - August 9, 2002

MX Engineering Course, Tyco Safety Products, Tyco F&S UAE LLC, British Club, Abu Dhabi-UAE - November 12, 13, & 14, 2005

Fiber Optic Training Course for Linear Heat Detection System (MX F100), Tyco Safety Products, Tyco F&S UAE LLC, Abu Dhabi-UAE - February 2, 2006

PROFESSIONAL EXPERIENCE (Recent to Previous Roles)

Date : August 14, 2017 – Present

Position : Supervisor – Project Construction Management

Company : Exponent Controls and Electrical Corporation Inc.

Projects : Maynilad – Automation Project for Sewage Treatment Plant

: Metro Manila

Responsibilities :

Site supervision and inspection of the on-going works installation of the instruments and control panel for the automation as per Maynilad Project requirements and specifications.

Provides technical assistance with the Project Engineers and Lead Engineers as well as with the Project in Charge for the development and well organized implementation of the projects including documentation procedure of the project drawings concept.

Date : August 01, 2016 –September 30, 2016

Position : Senior Electrical Engineer

Company : TISCO Philippines – Tamoin Industrial Services Corporation

Projects : Subic 93 MW Solar Power Project

: SBMA, Olongapo City

Responsibilities :

• Provide technical assistance with the contractor and design engineering proposal with review as project requirements.

• Site monitoring and inspection on site in coordination with other disciplines for the progress of the project as well as R & D engineering concept.

• Assigned electrical personnel on site with the area covered for the Solar Project including major substations in progress for project completion in coordination with the client and contractor.

• Provide technical proposal to the project manager and electrical head from the design stage for review which subject for approval to implement including for testing and commissioning.

• Plays an active role in the development of the safety culture on the project, making safety a natural part of all work performed.

Date : September 23, 2014 –December 12, 2015

Position : Electrical Engineer/Inspector

Company : CEG International – Doha, State of Qatar

Projects : Qatar Economic Zone 3 Project

: Msherieb Properties Project

Responsibilities :

•Assists and coordinate with Resident/Senior Electrical Engineer for the supervision for the electrical aspects of the project.

•Participates activity schedule on-site inspection with the materials delivered to confirm with the approved submittals..

•Check and monitor the project daily activities, site manpower resources, plant and equipment on the site as required for project billing/BOM review for approval.

•Review drawing lay outs for electrical works and provides comments as per IFC drawings with provision in shop drawings.

•Provides response and inspections for as built drawing lay out plans of electrical for approval with local regulations as per project specifications.

•Maintain records of inspection request and other works related documents on site at all times.

•Ensures all works done as per drawing and specifications as well as to follow up any related works for as built within the project requirements in related with RFI provided comments.

•Provides supervision and inspection works for the site soil/earth resistivity test in preparation for earthing and lightning protection works of the foundation structures and super structures of Phase 4A Mishirieb site in parallel with intersection tunnel of Qatar Railway Project as well as the interface earthing connection works as per tender provisions and project specifications subject for approval.

Date : October 22, 2013 – March 10, 2014

Position : Electrical Engineer/Supervisor

Company : Silangan Mindanao Mining Corporation Inc.

Projects : Power Station/Substations/Electrical U/G Substations

Responsibilities :

• Performs supervisions with the team for the electrical works in mining activities with in underground and surface works.

• Responsible for the load monitoring of the mining equipment not to overload with the standby generators and transformers capacity.

• Coordinate and assist with foreign consultant for any electrical works involves of mining activities.

• Responsible and ensures for the safety of all personnel on site especially in underground for major and minor electrical works.

• Provides assistance to Assistant Manager (Electrical Operations) for any electrical problems arise on site.

Date : September 01, 2011 –October 21, 2013

Position : Electrical Engineer/Private Practice

Company : LGU, Buug, Zamboanga Sibugay, Philippines

Projects : Several Municipal and Barangay Project

Responsibilities :

Performs community service in Barangay for progress and prepare resolutions for proposed projects.

Prepares resolutions as proposal for Waste to Energy project with the league of barangay councilors during Annual General Assembly meeting.

Marketing of power inverters, electric meter for home electrical installation.

Marketing of mobile phones and accessories as well as general merchandising of special products.

Installation of power inverters and batteries as back-up power for home and establishments as available to upgrade for Solar Power Equipment.

Attend bidding in PNOC-Diplahan for electrical supplies in mining projects.

Prepare quotations for bidding of electrical supplies.

Date : August 16, 2009 –August 31, 2011

Position : Engineer/Power Plant Supervisor

Company : Brixton Energy and Mining Corporation

Projects : Power Plant Construction/Mining Electrical Substation

Projects

Responsibilities :

Provides participation works during preparation of CAPEX/OPEX of the project as one of the project requirements including projected load computation of mine site energy consumption.

Preparation works, review and provision of RFQ during site implementation based on design required factory/site test acceptance subject for approval as per project specifications.

Coordination works with Power Utility (Zamsureco II) to cope up the required load demand of the mine site and primary distribution lines (13.8 kV) lay out installation works as per projected load schedule.

Provides assistance to Mines Operation Manager for any electrical problems arise on site.

Date : June 30, 2008 – February 13, 2009

Position : Electrical Engineer

Company : Hyundai Engineering and Construction Co. Ltd., Head

Office, Seoul, South Korea

Projects : Overseas Substation Projects – Dukhan Substations

Responsibilities :

Performs review on tender documents and provide correspondence (RFQ) for overseas vendors/contractors in provision to implement in project overseas substation sites.

Review tender specifications and design drawings for implementation.

Review post tender clarifications with client’s and vendor’s comments.

Provide assistance and support to team leader in preparation of summary list of main works as per scope of work from tender documents.

Date : July 01, 2005 – May 13, 2006

Position : Electrical Supervisor/Commissioning Engineer

Company : Tyco Fire and Security Company, LLC, Abu Dhabi, UAE

Projects : Tyco Clients UAE Project Sites

Responsibilities :

Supervision building assembly panel works of fire alarm and gas detection panel in workshop for the wiring lay out and installations of devices within the panel.

Provide power supply and factory test of the equipment prior to deliver on site.

Site testing and inspection of field devices of fire alarm system including deluge pump system for fire suppression.

Commence work as Commissioning Engineer as per booking office memo issued by Commissioning Manager.

Coordination works and participation during project implementation in one of the Aviation Hangar in Dubai for the Fire Alarm, Security and Detection System of the structure as per cable/termination schedule review works.

Date : November 09, 2004 – June 30, 2005

Position : Electrical Engineer

Company : Taiwan Overseas Mining Company

Philippines National Oil Corporation (PNOC) contractor

Projects : Gotas Coal Mining Project, Diplahan, Zamboanga

Sibugay, Philippines

Responsibilities :

Supervised installation of Switchgear panel in high and low tension switchboard panel.

Performs supervision for the mounting and installation of two 630 KVA and one 160 KVA transformer for power supply of electrical mining equipment.

Supervised and assist the installation of pushbutton control system for portable vacuum controller.

Supervised during power up of explosion proof vacuum disconnecting switch, power transformer, dewatering pump motor, armored force conveyor (AFC) motor and switchboard panel.

Testing and simulation of switchboard panel, power transformer, and portable vacuum controllers.

Date : September 16, 2000 – September 15, 2002

Position : Electrical Engineer

Company : Musfer Al-Khuraim Est. Contracting – Saudi Aramco

Rabigh, KSA

Projects : Facility Maintenance

Responsibilities :

Commence works in preparation of work order and job order from planning department to implement as per scope of work base in Aramco Standard application.

Performs engineering work design on work order request for the street lighting, facility and community building works with AUTOCAD software design application including material take off.

Participates on work implementation for the rehabilitation of underground gas tank including the re-installation of cathodic protection.

Coordination works to re-activate the Incinerator equipment for the replacement of ignition transformer.

Date : July 01, 1999 – December 31, 1999

Position : Senior Electrician

Company : Agus 4 – Hydro Electric Power Plant, National Power

Corp.Iligan, Philippines

Projects : Maintenance of Power Plant

Responsibilities :

Assists on installation of newly repaired submersible pump at the power intake.

Undertakes on the replacement of defective streetlights at the entire premises of the plant.

Assigned for the maintenance of carbon brush of the generator and bus duct.

Responsible for the maintenance of electrical lighting with in surface level to underground level of the plant.

Assists on prompt implementation and documentation of ISO 9002.

Date : March 23, 1995 – December 31, 1998

Position : Electrical Technician

Company : National Power Corporation – Mindanao, Philippines

Projects : Mindana0 SCADA/EMS Network Project

Responsibilities :

Participates and performs installations of SCADA/RTU/TELECOM system for power plants and substations interfacing works as per parameter data inclusion of EMS programme applications.

Coordination works with IVO consultants/foreign contractor during testing and commissioning jobs including backbone relay stations works on remote areas.

Date : January 31, 1993 – June 30, 1993

Position : Serviceman

Company : Cagayan Electric Power and Light Company - Philippines

Projects : Distribution Line Maintenance

Responsibilities :

Performs meter reading schedule in industrial plants and consumer’s residence.

Assist during energization of power transformers in industrial plants.

Assists installations and maintenance of fuse cut-out & other distribution line maintenance equipment.

Performs as Lineman in distribution lines below 13.8 KV power line.

GAPS in Employment History

July 1993 – February 1995 : Having On Job Training with Sta. Clara Substation to

Gain more knowledge in switchboard operation and

transmission line services maintenance including job

searching and private practice.

October 2016 – July 2017 : Sales, marketing, part time and job searching

CHARACTER REFERENCES

1. Mr. Gilbert Balaba HR/Admin. Asst.

Medtel W.N. WLL

Doha, State of Qatar

Mobile Phone No. +974-********

2. Mr. Cecil Soliva Planning/Civil Engineer

Bliss, Buug, Zamboanga Sibugay

Philippines

Mobile Phone No. +63-939-***-****

I hereby certify that the above statements are in accuracy to the best of my knowledge, skills, and capability to handle tasks/works for completion.

ANGELITO J. PIDOR (Sgd.)

Applicant

Contact this candidate