Crane Operator Equipment
Resume:
My name is Alton B. Sharpton I have been in the Civil Engineer and Heavy
Equipment industries for over 14 years.
My career has been vast and has taken me all over the world. I’m just finishing 24years with USAFR. During my years with Military and as a Civilian contractor I've been maintaining my communication, professionalism and organizational skills. These are capabilities which were instrumental in increasing productivity and reducing cost.
I would be a great asset to your company because of my hard work ethic and dedication. I am Crane, Heavy Equipment operator and also come with a number of Supervisory and administration skills.
Current Certifications/Endorsements:
TWIC, Medical (DOT), OSHA30, Safety Specific.
I am very intrigued about the Equipment Operator position and the ability to help your company succeed. Thank you in advance for your time. Please do not hesitate to con- tact me if you have any questions.
Sincerely
Alton B. Sharpton
Alton B. Sharpton
*******@*****.***
Objec-
tive _
Experienced, reliable, quality-focused Crane and equipment operator seeking a position with a reputable fast paced company with room for advancement. Skills/Equipmet
NCCCO certified: (TLL, LBC ) on large Telescopic Mobile hydraulic crane, Crawler cranes and Boom truck.
Excavators: JD350, Ds6 Dozers.
CRANES USED: Liebherr 1160 Luffing(2109 &1308) 200Ton, Terex RT780 ; Grove RT765E, Grove RT9130E, Linkbelt 138 Hylan 5 lattice crawler; Pioneer 3000 Boom Truck, ck2000 200ton, Terex 110T Lattice crawler. 100T Tadano, Broderson, Grove Car- rydeck
OPCAT certified on: Backhoe, Front Loader, Excavator and bulldozer Experience
Day & Zimmerman Surry Nuclear Outage Crane Operator April 2017 - May 2017, Sur- ry, VA
Contact: 757-***-****
Provided logistical and Operational support during the Removal of RCP Motor, Heads, Defuel- ing and Refueling procedures. Positioned individuals for Dome resurfacing utilitzing Manbasket incorporating Grove 9130 59’ Jib 40’’ offset. Held all necessary Pre-lift and lift briefings for co- hesion and seamless execution of tasks with multiple crafts adhering to all NRC and OSHA reg- ulations while operating all equipment ( Excavators, Trucks, Backhoes, Skytrack, Large and small Forklifts ) in furtherance of outage completion. UGS/CoreCrew Crane Operator April 2017 - April
Contact: Anna 513-***-****
Unloaded tower parts from transport to include bases, mid-base, upper-mid and upper. Carefully loaded and unloaded trucks for improved logistical placement of prioritized staging. Used differ- ent cranes to set tower parts to include Cells, Blades and Man Baskets for workers installed parts. Pans for scaffolding and other supplies were hoisted to assist in assembly. Controlled Large cranes to hang pipe, valves and other material in racks for site. Perform daily maintenance on cranes and equipment IAW policies and checks.
United States Air Force Reserves Civil Engineer (Structures Supervisor) 1991- Nov 2016 1055 Camp Fed Ln., SJAFB, Goldsboro, NC
Contact: SMSgt. Dan J.Connolly Jr.: 919-***-****
As Structural Supervisor, I manage a 40-person shop responsible for masonry, carpentry, weld- ing, sheet metal and contingency construction responsibilities; I handle budget recommenda- tions/tracking, personnel evaluations, and long-range training goals for the section; I also manage personnel responsible for section training, safety/health, environmental compliance, supply/ma- terials handling, vehicle maintenance, recycling programs, on-the-job training, inventory/cargo handling and individual mobility training.. Fabricated Kspans utilizing Automatic Building ma- chine 240, jig lift, backhoe and bobcat. Operated Terex RT780 crane to raise panels into position to be seamed. Used Articulating loader/Forklift in the fabrication of m2 matting for military air- craft runway repair. Planned, constructed and inspected framework. Operated hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment.
Long Foundation Drilling Co Crane Operator Jan 2017 - Present, Atlanta, GA Contact: 336-***-*****
Created 50 foot piers with the Drill by expediting the service of and exchanging 3ton Mud, Augers, Casing and cores ranging from 24” - 54” diameters for the Center for Advanced Pedi- atrics. Maintained refueling by placing tank logistically in position. Responsible for all functions pertaining to the Company’s cranes including, but not limited to, daily jobsite operation, routine and preventative repairs and maintenance, and required record keeping while operating a Linkbelt 138 Hylan5 in standard and freefalls modes. Fluor VC Summer Unit 2&3 Crane Operator May 2016 - Jan 2017, Jenksinville, SC Mark Phillips Superintendent: 409-***-****
Performed critical lifts of major components to Turbine 3 unit 3. Initiated corresponding prelift meetings and submitted all required JSA and STA reports. Determined load weights, situated weights and checked them against lifting capacities in order to prevent overload. Met with Fore- men, Riggers, carpenters and RB’s to ensure safe efficient hoist swing and placement of 50ft rebar and forms utilizing multiple forms of communications such as 3way radios and hand sig- nals. Fulfilled monthly maintenance on cranes (ie. Manitowoc 2250, Grove 9130) Off-loaded Rebar, Plywood and other materials from Truck.
YoungLove Construction (Tradesmen International) Crane Operator October 2015 - Nov 2015, 454 County Rd, Corning, Arkansas.
Contact: Scott Dwyer - 612-***-****
Placed Head motors, compressors and welding materials with the Liebherr 1160 Luffing(2109
&1308) Flying Jib (totalling 300ft). on top of feed mill for Peco Foods which features 50,000- bushel-per-hour rail .Layed rebar and Siloforms. Poured cement with cement bucket. Conferred with riggers on pick and set points. Assembled and installed the load block used in order to in- crease the parts of line necessary to raise Farm tanks and other items heavier than 19k. Managed safety briefings in an efford to help maintian a high level of quality, productivity for improved hazard and accident avoidance. Daily inspection of crane and rigging. Kept the rough grade for Crane level with the Mini Excavator and Backhoe.
StarCon(Marathon Petroleum Corp.) Crane Operator October 2015 Cattletburg, Ky.
Contact: Carla J. Mallory 606-***-****
Removed and Installed piping, Ducting, Flanges and valves for cleaning in the Marathon Pe- troleum Corporation refinery with Tadano 100ton, 8.5ton Broderson and Grove carrydecks. Picked and Set Shoring and formwork in the reinforcement of cement walls and roof in the Sul- fur Recovery Complex. Monitored H2S and other gases utilitzing appropriate gas meters. Donned the proper PPE necessary to work in Gaseous Flammable area such as FRC’s. Purcell Construction Corporation Crane Operator August 2015 - September, Newport News VA.
Erected the Prefabricated metal framing, Steel girders and corrugated metal flooring for PhaseIII of the AIT Barracks construction on Ft Eustis. Calculated distances to ensure a smoother and more productive build. Reviewed drawings in order to improve comprehension of picks for Steel stair installation. Coordinated with other crafts for a Lifting plan in the placement of their tools and equipment(welders, generators, pvc, conduit and flooring). Held Safety meetings for a full understanding of Hand and Radio signals. Reported daily on all Hazards Analysis to include weather and possible obstructions in conjunction with the Army Core of Engineers. Century Concrete Crane Operator May 2015 - August, Washington DC, MD Contact : Mackie Jenkins 703-***-****
Constructed foundation and basement of Carl Thomas Athletic Center utilizing UlvaForm Pan- elling and Bracing. Determined load weights, situated weights and checked them against lifting capacities in order to prevent overload. Directed helpers/riggers in placing blocking and outrig- ging under cranes. Coordinated setup and tear-down, read lift plans, load charts. Maintained level grade for site and crane with Excavator and skid steer. Off-loaded Rebar, Plywood and oth- er materials from Truck. Performed daily inspection and drove crane into to preplanned postion for safe secure lifts.
Educa-
tion
Community College of the Airforce
AAS Construction Technology
Georgia School of Construction Conyers, GA 2011
Crane Operator/Heavy Equipment Operator
Contact this candidate