Mechanical Engineering Design
Resume:
MIKE HOOD
PO Box ****
Santa Cruz, NM *****
ac1b2c@r.postjobfree.com
Linkedin/mikeehood
EDUCATION
Foothill College CA, Business Gov-Procurement
Carpenters Union College CA, 4 year Civil Engineering (BSCE Equivalent, Vocational) Merced CA, Agriculture/Business
SKILLS SUMMARY
Outstanding Mechanical Designer/Engineer with solid experience in design and efficiency MFG/ Aerospace/FAB Techniques, mechanical designs, production and safety. Highly detailed and creative problem solving skills developed through hands on experience and analytical knowledge. Progressive team member with the inclination to improve MFG procedures & operations resulting in increased profits and a higher rate of design/product reliability. Works well with a diverse group of team members to establish workable procedures for efficiency, safety and quality. Exceptional team leadership and management skills. “Q” Clearance (not active). EXPERIENCE
Microwave Materials Technology, Oak Ridge, Tennessee March 17 – Current Project Manager (C2C)
* Microwave and RF Frequency Processing, State of the art MATS-30 microwave processing.
* Waveguides, Tuners, Waveguide splitters, Waveguide bends, Switches (Electromechanical).
* Design engineering, Conceptual Design, Scheduling, Procurement, Customer interface.
* Solidworks, EPDM, ERP Jobscope, GD&T, AWS, ANSI/ISO standards. Y12, Oak Ridge National Laboratory, Oak Ridge, Tennessee March 16 – March 17 Design Specialist (Contract)
* Uranium Processing Facility (UPF), State of the art Microwave Casting of uranium parts.
* Mechanical specialty engineering, Glovebox development & equip, drawing packages.
* New technologies, Facilities Layout, Construction, Source containment, Cost reduction.
* Creo, Pro/E, Windchill, ProjectWise, InfoWorks, EDMS, GD&T.
*ProE, Creo, Windchill *Unigraphics NX Teamcenter *SDRC, IDEAS, CAD *SolidWorks, PDM, EPDM
*Mechanical Engineering *ASME, GD&T, FEA *Satellites Aerospace *Pressure Vessels, Vacuum
*3-D Printing, Liaison Eng *Antenna Microwave RF *Nuclear Weapons *Skids, Oil & Gas
*Aviation, NASA *Piping, P&ID, Routing *Robotics, Automation *Subsea Tech
*MRP ERP Software *ASME B31, ETC. *Glovebox, Hot Cell *NNSA Manual, Standards
*Modeling Simulation *ECN, ECR, ECO, Mgmt. *Space Launch Vehicles *Pulsed Power
*Marine Propulsion *Welding, AWS *Hydraulics *DOE & DOD Standards
*Electro Mechanical *Jigs & Fixtures *Sheet Metal *Composites, Molds Sandia National Laboratory, Albuquerque, New Mexico May 15 – Nov 15 Design Specialist (Contract)
* R&D Nuclear weapon design, development, and integration.
* Conceptual designs, Modifications, Tolerance stacks, Fit & function.
* Design engineering, Modeling, Large Assemblies, Detailed parts, BOM, Drawings.
* Pro/E Creo, Windchill, PLM, GD&T, AWS, ANSI standards, Microsoft Office Products. CMA GROUP, Denver Colorado Dec 14 – May 15
Design Engineer (C2C)
* Advanced marine propulsion systems.
* Commercial, military, and workboat applications
* US Army Bridge Erection Boat (BEB). Inventor, CNC, Nesting SolidWorks
* Steel, composite, and aluminum-hulled vessel
CES, Golden, Colorado July 13 – Nov 13
Design Engineer (C2C)
* Lead Designer, Project Management
* Skids, Oil & Gas, Subsea, etc.
* Standards, Checking, Piping, P&IDS, Mechanical, Weldments
* Vendors, Expediting, Purchasing, SolidWorks, EPDM Vercet LLC, Dallas Texas JUNE 12 – June 13
Design Engineer (contract)
* Oil & Gas, Subsea, subsea, Mapping the Ocean Floor, State of the art Marine Mapping
* Research & Development Company, Hydraulics
* Subsea seismic, mapping, electromechanical, piping, weldments
* provided modeling/engineering/FEA
* Project management, R&D, conceptual design, design reviews, new product development
* Vendor interface, materials, etc.
* Manage EPDM library. SolidWorks, EPDM
Geothermal, Auckland New Zealand (3 Month Wk Visa) FEB – MAY 2012 Mechanical Designer (contract)
* Provided modeling, layout, P&ID’s, Subsea
* Piping, instrumentation, components
* Created and managed EPDM library, SolidWorks, EPDM
* 3 Month work visa
General Dynamics, Kilgore TX 2010 - 2012
Mechanical Design (contract)
* Design RF beam waveguide antennas
* U.S. Army Space and Missile Strategic Command
* Development/Design of Anti-Icing System
* Composites Mold/Tooling Design
* Structures, Sheet Metal, Machining, Weldments, FEA
* Assembly tooling design and documentation
* Tooling modification, fixtures, jigs
* Electro-Mechanical assemblies
* Drawings, large assemblies, bill of materials (BOM), electrical schematics
* SolidWorks, EPDM
Los Alamos National Laboratory, Los Alamos NM 1998 – 2010 Mechanical Engineering (contract)
* Enforced process improvements in the areas of quality, delivery and reduced cost.
* Developed the floor plan layout, Glovebox, Glove Box, Hot Cell, and production/manufacturing practices.
* Designed, created, acquired and adapted tools, equipment and protocol for efficiency.
* Created procedures to improve manufacturing from manual process to a system of automation.
* Weapons, Nuclear power reactor Design/Transportation.
* Satellite support & design, NASA, Air Force, Navy, and Homeland Security.
* DOD Aeronautical optical development and design, currently used in Iraq & Afghanistan, etc.
* Pulsed Power (Atlas), Capacitors, Vacuum, Source Recovery & Containers.
* Particle accelerator/targets, RF linear systems, Process gases, Vacuum systems.
* Process piping and P&IDs, heat transfer.
* Worked with Product Release team to review parts design, make tooling, design & build calibration stations.
* National High Magnetic Field Laboratory (NHMFL), Tesla 60, 100.
* Drawings, large assemblies, bill of materials (BOM), electrical schematics, P&ID, FEA.
* Presentations of design, Design Reviews, Process, Materials, Manufacturing.
* Fabricated prototypes (utilizing pneumatic cylinders, step motor, actuators and solenoid process).
* Unigraphics, NX, iMan, Teamcenter, SolidWorks, EPDM, ProE, Creo, Windchill. Lockheed Martin, Denver CO 1996 – 1998
Astronautics/Mechanical Engineering (contract)
* Lofting, dimensional fit and function.
* Coordination with major portions of an ATLAS/CENTAUR, TITAN/CENTAUR space launch vehicles. Astronautics DOD
* Satellite payload design/support.
* Documentation & configuration management.
* Tooling, Fixtures, Process gas & explosion proof fuel lines & routing.
* Composite tooling & design.
* Tooling, jigs & fixtures,
* Blankets/Shielding flat pattern design, 40’ X 12’ scribe/cutting plotter program & operate.
* Drawings, large assemblies, bill of materials (BOM), electrical schematics, P&ID, FEA.
* SDRC, IDEAS, Unigraphics, iMan, Teamcenter.
Sunstrand, Denver CO 1996 – 1996
Mechanical Engineering (contract)
* R&D Design of fluid pumps. Unigraphics, iMan, Teamcenter.
* Structures, Large skids, weldments.
* Design & Manufacturing High-pressure seals, lapping.
* Tooling, manufacturing, gearboxes.
* Drawings, bill of materials, documentation, configuration management. Astec Inc, Santa Ana CA 1995 – 1996
Mechanical Engineering (contract)
* Manufacturing, castings, forgings
* Drawings, large assemblies, bill of materials (BOM)
* Redesign reverse thrusters
* Upgrade DC-9, Unigraphics, iMan.
* Jigs & fixtures, Drawings, assemblies, BOM
Western Forge, Colorado Springs CO 1994 – 1995
Manufacturing/Mechanical Engineering (contract)
* Design molds, forgings, castings
* Medical devices and tools.
* Heat treating, broaching tools
* Progressive dies, production lines
* Quality control, inspection
* Extrusion plastics/aluminum
* Drawings, detailing, assemblies, Unigraphics, BOM, FEA Aerojet, Folsom CA 1993 – 1994
Astronautics/Mechanical Engineering (contract)
* EBM welding fixtures
* Design portions of the F-22
* Jig & fixtures, tooling
* Drawings, assemblies, Unigraphics, BOM, documentation CAE Enterprises, Redondo Beach CA 1991 – 1993
Mechanical Engineering
* Modeled fiber section of MD-11 for N/C programming
* Documentation, interface with vendors, facility surveys
* Rapid prototyping, STRATASYSS, wax paper & 3-D printer
* Fixtures, tooling, jigs
* Drawings, assemblies, Unigraphics, BOM, CAD-CAM, CAE CAD Concepts, Fullerton CA 1990 – 1991
Manufacturing/Mechanical Engineering
* Modeling using surfacing for a variety of products
* N/C programming, Unigraphics,
* Drawings, assemblies
Hood Manufacturing, San Jose CA 1983 – 1990 Owner/Operator Design/Prototyping machining & fabrication of sheet metal, metal and Plastics, welding MIG, TIG, plasma cutting, equipment for integrated circuits (IC) facilities.
Contact this candidate