Project Quality

National Inspection and Technical Testing Co.

FAHSS/TÜV

Member of TUV NORD Group

1

ZAHID IKRAM

E mail: *********@****.***

**********@********.***

Cell #009***********

Profile: Successfully studied in well known and established institutes in Pakistan as well as in England. Have obtained high prestige among teachers and at Institutes. With all my efforts and hard work today I stand on a point where I can present myself as a person committed to his work. Besides above, also possess:- Objective: To seek a job in dynamic organization this provides opportunities for learning as well as professional development.

1. BGAS – CSWIP(TWI), UK

BGAS GRAD 1, OFFSHORE PAINTING INSPECTOR

Customer no: 653038

2. BGAS – CSWIP(TWI), UK

BGAS GRAD 2, PAINTING INSPECTOR

Customer no: 653038

3. NDT MPI LEVEL-2, ASNT

4. NDT PT LEVEL-2, ASNT

5. H2S CERTIFICATE, AIMS – SMTC GLOBAL

Future Goals :

CORROSION & METALLURGY ENGINEER (API 571)

API 570.

CSWIP

EDUCATIONAL QUALIFICATIONS:

DEGREE SUBJECTS INSTITUTION YEAR

P.G.D Management LCMS (London) 2007

B.C.S. CS. A.I.O.U. 2003

F.Sc. Pre-Engg. Lahore Board. 1999

2

COMPUTER SKILLS

* FOXPRO * C++

* MS Word * MS Excel

* MS Outlook * MS Power point

PROJECTS :

1. JIZAN REFINERY & MARINE TERMINAL FACILITIES PROJECT ARAMCO NO. 8198414

Currently Work at JIZAN REFINERY & MARINE TERMINAL FACILITIES PROJECT PKG # 14, As ARAMCO Senior Painting Inspector Level-II. Responsible for Providing instructions and General Supervision to Level-I coatings inspectors.

Working on APCS 1A, APCS 2C, APCS 11A, APCS 11C & APCS 19C, APCS 113A, APCS 102A/102B, APCS 104A.

2. ZP ARABIA DRILLING COMPANY SAUDI ARABIA (SINO -16) Work at SINO -16, Onshore RIG and was responsible for NDT MPI Inspections and Coating Inspections.

3. DRILLING AND PETROLIUM SERVICES COMPANY SAUDI

ARABIA (RIG -5)

Work at Rig-5, Onshore RIG and was responsible for Coating Inspection and NDT Inspections.

4. DRILLING AND PETROLIUM SERVICES COMPANY SAUDI

ARABIA (RIG -46)

Work at Rig -46, Onshore RIG and was Responsible for Coating Inspection and NDT Inspections.

5. DRILLING AND PETROLIUM SERVICES COMPANY SAUDI

ARABIA (RIG -4)

Work at Rig 4, Onshore RIG and was responsible for Coating Inspection and NDT Inspections.

6. SALINE WATER CONVERSION CORPORATION SAUDI ARABIA

(SWCC)

Work at Saline Water Conversion Corporation, Saudi Arabia, and was responsible for Coating Inspection and NDT Inspections. 3

7. ZP ARABIA DRILLING COMPANY SAUDI ARABIA (SINO-6) Work at SINO-6, Onshore RIG, and was responsible for Coating Inspections & NDT MPI Inspections.

8. DRILLING AND PETROLIUM SERVICES COMPANY SAUDI

ARABIA (RIG -45)

Work at Rig -45, Onshore, was responsible for Coating Inspections and NDT Inspections

9. DRILLING & PETROLIUM SERVICES COMPANY SAUDI ARABIA

(RIG-43)

Work at Rig -43 Onshore, and was responsible for coating Inspections and NDT Inspections.

10. ZP ARABIA DRILLING COMPANY SAUDI ARABIA (SINO-45) Work at SINO-6, Onshore RIG, and was responsible for Coating Inspections & NDT MPI Inspections.

11. DRILLING & PETROLIUM SERVICES COMPANY SAUDI ARABIA

(RIG-43)

Work at Rig -43 Onshore, and was responsible for coating Inspections and NDT Inspections.

12. DRILLING & PETROLIUM SERVICES COMPANY SAUDI ARABIA

(RIG-4)

Work at Rig -43 Onshore, and was responsible for coating Inspections and NDT MPI Inspections.

13. DRILLING & PETROLIUM SERVICES COMPANY SAUDI ARABIA

(RIG-45)

Work at Rig -45 Onshore, and was responsible for coating Inspections and NDT MPI Inspections.

14. HARM extension programme, MADINA:

Working at MADINA HARM extension Programme as QC Engineer. Responsible for Coating Inspections, NDT Inspections, Vehicles Visual Inspections.

4

15. PRINCES NOORA UNIVERSITY RIYADH:

Working on project sited inside Princes Noora University, Riyadh. Responsible for QC activities for GRC Cladding inspection. Code & Standard Mainly Used:

ASME/API/ASTM/BS/ SAES/ NACE / SSPC

ISO 9001: 2000 Quality Management System

ASME Section IX

ASME SECTION V

BS 729, BS 7079, BS 1710, BS 5378, BS 351 C, BS 4800,

PFP

FAHSS TUV NORD (SAUDI ARABIA) 03/10/2011 Till date AS SENIOR COATING QC ARAMCO PID

JOB RESPONSIBILITIES

Review all paints and coating specification, manufacturing product data sheet, painting crew approval, equipment calibration certificates, safety standards an d

other paints and coated related documents.

Check all inspection equipment, abrasive, blasting equipment all properly

tagged prior to commencement of the paint/ coating activities

Monitor grit blasting activities to comply with require standards

Conduct surface profile measurement with press-0-film paper

Ensure surface cleanness prior to coating application(Primer/ top coat)

Monitor and check wet film and dry film thickness requirement as per standards

Inspect coating for any paint defects for touch up repair

Check daily inspection report completed by the true supervisor

Responsible for inspection works for sand blasting and painting of weld head / tie and spools, plate forms, gin poles, pipe supports, application of heat shrink sleeves

and other miscellaneous painting works

Coordinate the assignments of workers based on the daily painting requirement

Ensure the use of correct blasting and painting materials as per the

requirement of construction drawings and painting data sheet

Issue NCR for violation and submit it to the QA/QC department

Perform holiday testing for underground piping to ensure that all coating defect

are repair prior to back filling

Monitoring of Paint materials storage and preserve in proper storage

container as per product specification

Handling and mixing paint for painter assign below water line, usually paint

use as anti corrosive and boot topping paint and primers.

After receipt of material at site, check for transit damage batch number, purchasing order and manufacturing date, record and submit for approval buy ship owner or

authorize representative

5

Monitoring weather conditions: Relative Humidity & Dew Point calculation.

All steel structure are duly recorded before blasting works is started. We

record spool numbers and paint specs plus color code.

Area of steel structure shall be washed with specified product to remove dust,

grease or oil then thoroughly washed with fresh water.

After dry up, the whole area of blasted surface is visually inspected with surface profile comparator for the acceptance which is measured with spring loaded micrometer and testex tape. The chlorine content is checked and area cleaned for

painting.

Preparing work output by reconciling total hours manpower output against sandblasting / painted areas and amount of material used which submitted to

QC daily.

Development of painting schemes as per Customers consultant specification.

Different types of Quality checks for the Coating as per ASTM codes practices &

NACE, SSPC, standard.

Testing of raw material as per ASME section 2 IS Standards, JIS-EN & ISO Standards.

Designed the THERMAX painting manual.

Designed Painting scheme for all standards & Non standards products of thermax.

Inspection of coating and painting of pipe-lines, equipment’s, structures,

vessels and underground pipelines.

Inspection of blasting equipment and blasting abrasives.

Monitoring environment condition before and during blasting and painting to

comply with specification.

Verifications of paint system by using standards drawings & specification

Inspection of surface preparation prior to paint application on pipe-lines,

equipment’s, structure, vessels and underground pipelines.

Ensure the mixing of paints and make sure the correct materials are used as per

specification and standards.

Organizing and conducting tests such as adhesion test chloride contamination

test, holiday test etc, to make sure the quality measures.

Invite and coordinate with the client representatives on each stage of process.

Review scope of work of all related coating activities as per project quality plan.

Review and verify all submittal / products approval required as per specification.

Revamping of the specification.

Overall supervision for the application of Fire proofing & protective coating for

offshore platform and process vessels

Set up of Lab for physical and chemical tests involved in Quality procedures for

pipe coating plant.

Both contractor use internal crawler camera, computer aided camera, remote

control blasting machine and spindle coating applicator.

Corrosion study, paint technologies, surface preparation techniques, coating

defects, Painting safety regulations.

Responsible for Inspection works for sand blasting and fitting of weld head / Tie- in spools, Plate forms, Gin poles, Pipe supports, Application of heat shrink

sleeves and other miscellaneous painting works.

Co- ordinate the assignments of workers based on the daily painting requirement. 6

MASEL ENGINEERING. 01/06/2009 to 1/10/2011

AS PAINT INSPECTOR

JOB RESPONSIBILITIES

Painting / coating inspection of steel structural works, pipeline, pressure vessels, new building.

Responsible for stage wise painting / coating inspection.

Undertake QC painting / coating activities in the work place for daily basis.

Monitor weather condition for surface preparation and painting / coating application.

Prepare “inspection & test plan” (ITP) for specific project / company requirements/surface

Execute Painting / coating inspection work as per company / project inspection test plan.

To check and monitor all painting / coating related works and ensure all final products Meet

in accordance with company procedure, client requirement and international codes.

Responsible for incoming coating / painting material inspection and has to ensure whether these

materials suits to meets the requirements of project specifications.

Prepare all necessary QA / QC painting / coating documents and handed over to clients review.

To undertake test qualifications for spray painters, brush painter’s closed blasters & abrasive

blasters.

Co-ordinate with the paint manufacturer technical representative on daily basis. QUALITY & SAFETY RESPONSIBILITIES:

Follow and maintain Company standards of Quality in accordance with Company Quality System

requirements.

Maintain standards of safety and comply with Company’s Health, Safety and Environment Management System requirements

Take reasonable care of own health and safety and that of others in the workplace. Used Tools & Guages

Salt contamination Test – Silver Nitrate Test, Merkoquant Test, Bresle Sample Patch Test

Holiday test - Elcometer 236

Digital Coating Thickness Gauge - Positector 6000, Elcometer 456 F &FNF

Calibration foils

Calibration Standards

Whirling hygro meter – Elcometer 116

Dew point and Relative Humidity Calculator- Elcometer 114

Dial Micro Meter Surface profile gauge with Replica Tape - 130/10

Surface Profile Needle Gauge

Dolly Adhesion Test – Elcometer 106

7

Adhesion Test- V Cut Test

Adhesion Cross Cut Test (Cross Hatch Test)

W F T gauge steel and plastic- Elcometer 112, 115, 154, 3230

Limpet Magnetic - Thermometer Elcometer 113, 212

Digital thermometer – Elcometer 212

Telescopic inspection mirror

Hypodermic needle gauge

UK Business Academy (London) 02/2006 to 04/2009

Training & Admin Officer

I was responsible to give training for following topics!

Corrosion fundamentals, its causes and its cures.

Surface preparation methods, Surface Grades & Surface Profile Measurements.

Different types of tests on prepared surface.

Basics of Paints and its ingredients.

Paint application grades.

Different types of Destructive and Non-destructive tests on paint film.

Deep description about paint faults and its possible cures. Prepares Documents :

Open, sort and distribute correspondence (including faxes and electronic mail) and record to routine inquiries.

Draft correspondence and reports.

To ensure that all documents are submitted to their predesignated departments before the required submission date expires

To prepare these documents in a timely manner.

Key Competencies :

Having good written and spoken communication abilities

Having excellent IT skills

Having leadership skills

Knowledge, database, word processing and selected job specific software

Ability to keep clear and accurate records and reports

Ability to use computer and rapidly input data and retrieve records and information

Ability to organize work load and to manage a filing methods and management techniques

Personal information:

Father’s Name: Ikram Hussain

Religion: Islam

Iqama : Transferable

Marital Status: Married

Nationality: Pakistani

Age: 36 years

Driving Licence Valid KSA

Contact this candidate