Electrical Engineer Power Plant
Resume:
SARVOTTAM (SAM) K. MEHTA, PE
Crowley, TX 76036
***/***/**** (Home)
***/***-**** (Cell)
E-Mail: **********@*****.***
OBJECTIVE: Seeking Senior Electrical/ Instrumentation & Controls Engineer
EDUCATION: MSEE, Birla Institute of Technology & Science,
Concentration: Power and Control Systems
BSEE, Indian Institute of Science,
Concentration: Power and Control Systems
BS Physics, Gujarat University,
Minor: Math
LICENSES: Professional Engineer in Michigan and Texas.
SPECIAL CAPABILITIES:
More than 20 years of experience in Electrical/Controls engineering, design and construction of Nuclear power plants. Working knowledge of PCs: WinWord, Excel.
EXPERIENCE:
11/2014- 3/2017 Worley Parsons
Senior Supervising Electrical Engineer
Worked on BASF West End Substation and Ammonia Terminal substation. Prepared Scope of Work, specifications, data sheets, one lines, layout drawings for substations and prepared Purchase Order for major electrical equipment and Power and Control building.
5/2014-10/2014 Technip USA
Senior Electrical Engineer
Worked on BP’s Juniper Topside platform. Responsible for Electrical Instrumentation and Telecommunications building procurement. Prepared one lines, electrical equipment list, etc for EIT building.
4/2013- 5/2014 AMEC Oil and Gas
Senior (Lead) Electrical Engineer
Worked on Petrobras’s Green Turtle FPSO FEED. Prepared One Lines, electrical datasheets for HV and LV control gears, Emergency Generator, cable sizing and cable schedule.
Worked on BHP Well Pad reconfiguration project. Provided solar power to skid instrumentation.
Worked on FEED for Anadarko’s Central Processing Facility in Algeria- Added spare re-injection compressor.
Resume of Sarvottam K. Mehta
Page 2 of 4
Worked on Chenerie Energy’s Ethane Export (LNG) pre feed project. Prepared conceptual One lines for 138KV, 5KV, 480V. Also, prepared electrical major equipment specifications, cable schedules, electrical load list, etc.
3/2012 –4/2013 Worley Parsons
Senior Supervising Electrical Engineer
Worked on BP’s Gulf of Mexico, brown field project- seven platforms modifications. Revising one lines, wiring and schematic diagrams, cable and conduit plans, cable and conduit schedules, lighting and grounding plans, load flow analysis, etc.
02/2010 – 3/2012 AMEC/Paragon
Principal/Lead Electrical Engineer
Worked on Chevron’s Gas Plant in Angola project. Prepared One lines, schematics, area classification drawings. Prepared Electrical equipment load study, 5KV and 480V Cable schedules, cable tray MTO. Prepared Material Requisitions for Quote and Purchase
08/2009 – 12/2009 Sofec Corporation
Title: Principal Electrical Engineer
I am working on FEED project for FPSO (Floating Production, Storage and Offloading) vessel electrical power distribution. Preparing electrical specifications, One Line diagrams, electrical load list, electrical calculations, etc.
01/2007- Present Worley Parsons
Title: Principal Electrical Engineer
Prepared medium (34.5KV, 6.9 KV and 4.16KV)and low voltage (480V) power distribution systems, One Line diagrams, Specifications for major electrical equipment such as switchgear, MCC, power transformers, motors, cables, UPS, Batteries, etc. Also, preparing motor load list and datasheets.
4/2006- 01/2007 Aker Kvaerner
Principal Electrical Engineer
Prepared medium voltage (6.9KV) and low voltage (480V) One Line Diagrams, Motor Load List, Major Electrical Equipment Data Sheets, calculations for load flow, short circuits, voltage drops, protection and coordination study etc for Exxon-Mobile’s Singapore Parallel Train Ployethylene plant .
08/04 – 3/06 Framatome-Areva
Title: Principal Electrical Engineer
Employed at Comanche Peak nuclear power plant in Turbine Generator controls Digital Upgrade modification group. Prepared/reviewed electrical calculations such as panel loading, cable/ breakers/fuse sizing, voltage drop, short circuits, etc for 480VAC, 208/120VAC, and 250/125VDC systems. Prepared/reviewed the modification changes (CDR, PWA, FDA). Also, update electrical and controls drawings such as one lines, schematics, wiring
Resume of Sarvottam K. Mehta
Page 3 of 4
diagrams. Specified/ purchased electrical equipment such as switchgears, MCCs, distribution panel boards, transformers, motors, cables, circuit breakers, fuses, etc. provided technical direction to junior engineers/designers
03/02 – 08/04 Washington Group International
Title: Principal Electrical Engineer
Worked at Fermi 2 Nuclear power plant in Michigan. Providing engineering support to electrical system engineering. Prepared Engineering Design Package (EDP) for major modification work. Prepared/ reviewed calculations. Also revised surveillance procedures, performed Equivalent Replacement Evaluation (ERE) for QA level 1 and NQ equipment and components.
09/01 – 2/02 MPR Associates, Inc.
Title: Senior Engineer
Worked on Nuclear, thermal, Combined cycle and IPP (Independent Power providers) power plants projects, medical facilities, process plants, etc. Design of power distribution system, calculations, review of equipment qualifications, third party evaluations, inspections, etc.
11/00 –8/01 Bechtel Telecommunications
Title: Senior Electrical Engineer
Worked on Nextlink telecommunications’ ISP facilities ranging from 10,000 square feet to 30,000 square feet. Performed design of AC and DC power plants. The design included the power distribution, lighting, grounding, panel schedules, etc. Performed load flow, short circuit and circuit breakers settings calculations using ETAP software.
6/99 –10/00 Carter & Burgess(Aerotek)
Title: Senior Electrical Engineer
As a project engineer for telecommunications projects for the Central Office Engineering (Data Center) ranging from 500 sq. ft. up to 40,000sq.ft, performed design of AC and Dc power plants, network planning, fiber and conduits installation for data communications for clients such as Colo.com, Prism, Winstar, Genuity, Sigma Network and Southwestern Bell.
11/98- 6/99 Excel Communications(Aerotek)
Title: Senior Electrical Engineer
Performed design of AC and Dc power plants, data communications for Central office ranging from 10, 000 sq. ft. up to 25,000 sq.ft for Excel Communications.
3/96 –10/98 CDM, Inc
Title: Senior Electrical Engineer
Performed design for cities and county water and waste water treatment plants controls, instrumentation, network planning, monitoring and data acquisitions using fiber installations.
5/95- 3/96 Wyman Gordon Forging
Title: Senior Project Engineer
Performed maintenance and engineering support of machine controls and monitoring the performance of machines with
Resume of Sarvottam K. Mehta
Page 4 of 4
data acquisitions using fiber installations.
2/94- 4/95 General Motors Corporation
Title: Senior Controls Engineer
Performed maintenance and engineering supports of machine controls and monitoring the performance of machines with data acquisitions using fibers, conduits installations.
10/88-6/93 Stone & Webster
Title: Senior Electrical/Controls Engineer
Worked at Comanche Peak Steam Generating Station, PWR, Unit 1 and 2, 1100MW each. Performed load flow, voltage drop, short circuit, circuit breakers and cables sizing calculations for 480V, 120V and 125VDC power distribution systems. Also prepared Design Change notices, Non- Conformance reports, Design criteria for different systems. Also reviewed vendor shop drawings.
9/87- 9/88 Ebasco Services
Title: Senior Electrical /Controls Engineer
Worked at Brownsferry Nuclear power plant, BWR, 1100MW unit 2. Worked as a system engineer for electrical systems, such as 4160/480/120 volts, 125VDC systems. Performed raceways sizing and routing. Prepared power and lighting plans. Performed resolution of field problems. Supervised a group of 10 engineers and 5 designers.
9/84 – 9/87 General Electric
Title: Electrical/Controls Engineer
Worked at Nine Mile Point, BWR, 1100MW, Unit 2 project and Brownsferry, 1100MW, Unit 2. Prepared the Design Change Review and Design Change Notice for NSSS systems. Performed short circuit, voltage drop, cable/protective devices sizing calculations. Also worked on raceways sizing and routing. Prepared power and lighting plans. Performed Non Conformance reports disposition
8/83 – 7/84 Bechtel Power
Title: Electrical Engineer
Worked at Midland Nuclear power plant, PWR, units 1 & 2, 1100MW. Performed the raceways routing layout, and raceways supports design.
10/80-7/83 Giffels Associates
Worked at Fermi Unit 2 BWR power plant. Performed electrical modifications and calculations.
PERSONAL: U.S. CITIZEN.
Contact this candidate