Engineer Project
Resume:
Dear sir/madam,
Good day.
I am IAN G ESTOMATA. I am an Mechanical design engineer by background.
I have a total of 13 years in the field of Mechanical Design.
* ***** ** **** ****** engineer with HI AIR KOREA (Korean HVAC Contractor/Manufacturer),
3.5 years as Senior Mechanical/HVAC engineer with DNV-GL (an international classification society), and
1.5 year as Mechanical/HVAC/Project engineer with TOTAL UAE (upstream oil and gas, client side).
I have experienced working as the engineer, doing all the work – calculations, documentation, drawings, layout, procedures, testing and commissioning, etc. I have also worked on the consultant side, third party reviewer and also as the client – checking all vendor documentation, calculation for mechanical. I have experience with different classification regulations – DNV, GL, ABS, as required by client. I also have experience on a multi-discipline design engineering environment where inter-discipline review and coordination and as well as weekly meetings are essential.
I have about 2.5 years experience in construction (offshore) under TOTAL UAE. I was in charge of all Mechanical/HVAC concerns and Mechanical/HVAC offshore projects. As Mechanical engineer, I did management of small offshore projects (mostly on repair/upgrade/replacement) from planning, tender, procurement, vendor management, logistics and delivery offshore, installation then testing and final inspection.
These works are:
• 20ft Office module replacement
• Offshore office refurbishment
• Life boat and davit offshore installation
• ESD Valves PFP installation
• Ducting replacement offshore
• DERA project management (UAE Gov’t Security Project – camera and radar installation)
• LQ1 Recreation room + Offices replacement
Please let me know if there are any positions in your company that I may qualify in.
Please contact me thru: *********@*****.***
Thanks and best regards,
Ian G. Estomata
+63 2 641 7707
IAN G. ESTOMATA
539 P. Bonifacio St., Sumilang, Pasig City, Philippines
*********@*****.***
HVAC / Mechanical Engineer
Offshore brown field projects engineer/ offshore construction.
Mechanical / workpack / Package engineer
BS Mechanical Engineering (University of the Philippines 2001).
Valid Certificates for H2S and Breathing apparatus/Sea survival/HUET/Basic first aid/fire fighting.
Experience summary (13 years)
8 years with an HVAC engineering and manufacturing company (HI AIR KOREA)
3.5 years with an engineering and consultancy company (DNV-GL)
1.5 year with a client company (TOTAL ABK) (about 2.5 years in TOTAL as 1 year was under DNV-GL)
JOB EXPERIENCEB EXPERIENCE
2016 to present
Freelance HVAC Engineer/Consultant
JOPETWIL300 Jack Up Barge Modification Project
Client : CCTC Abu Dhabi
Design/Engineering Consultant: Aqualis Offshore Dubai
Responsibility: Prepare complete HVAC detail design under Aqualis offshore
Offshore Dynamics Limited (Sharjah)
Remotely perform functions as Lead HVAC Engineer for preparation of company tenders/bids
October 2014 April 2016
Gulf Human Resources Development for Recruitment (GHRDC)
Seconded to TOTAL Abu Dhabi Office
TOTAL Abu Al Bukhoosh (TABK)
Seconded to TOTAL Abu Dhabi office
Position: Mechanical (HVAC) Engineer / Project Engineer (Brown Field)
Responsibilities:
Projects:
1.Liaise with contractor for all scope of work.
2.Conduct offshore site survey for feasibility, scope of work determination and logistics study.
3.Gather all requirements from discipline engineers/staff and offshore personnel for insertion to scope of work. Make sure all discipline involved in the scope of work are well informed.
4.Requests for budgetary quotes from contractors prior to official bidding for company budgetary allocation and review.
5.Accompany vendors/contractors to offshore site for their own site survey needed for identification and finalization of their proposal and scope of work.
6.Monitor and track all documentation for the project.
7.Make sure project is on schedule.
8.Facilitate/initiate third party inspection and certification if needed.
Logistics
1.Monitor material deliveries of contractors to on-shore yard and to offshore. Initiate requests for cranes/forklifts that may be needed to receive the deliveries.
2.Facilitate the Letter of Assistance (LOA) request from contractors for offshore work in UAE.
3.Coordinate and gets approval for manpower mobilization with TABK Offshore Field Manager and Field Planner.
4.Make sure that all contractor personnel have offshore safety certificates prior to mobilization (Security Pass, BOSIET, H2S, Medical certificate etc).
Offshore Construction:
1.Monitor daily work/progress. Check daily report by contractor.
2.Disseminate and review Job Risk Assessment (JRA) as provided by contractor to Offshore and On shore staff.
3.Make sure all scope of works is clearly defined and identified so offshore personnel can perform the tasks accordingly.
4.Conduct site visits for progress and for hand over purposes.
Contracts:
1.Review invoices and make sure they are as per work performed/materials delivered by contractor.
2.Initiate request for Call off Orders/POs (internal documents) for projects awarded to contractors.
HVAC Engineering
1.Discipline / Lead engineer for all projects with HVAC scope of work.
PROJECT INVOLVEMENT
a)LQ1 Recreation Room Project
Replacement of existing Squash court and with addition of new offices.
b)AKS Platform Safety Upgrade
Replacement of FA ducts to 3 AKS technical rooms
Refurbishment of AKS accommodation/Resting area
Installation of new lifeboat and testing of new Davit offshore.
PFP installation of EsDV Valves
c)DERA Project Phase 2
External project by AIS/ATS and CICPA -- Completion and commissioning of CICPA technical room on TABK platform.
d)DERA Project Phase 3 (CNIA TOP Level Design & Installation + Security Upgrade)
External project by AIS/ATS and CICPA - Installation of radar on TABK tower
Project was put on hold by AIS.
e)AKW Replacement of Office/Accommodation Container
Contractor: Specialist Services
f)TABK Academy Workshop Construction
Contractor: CHALMERS
g)Projects on HOLD
a.AKFW Platform : HVAC unit replacement for AKFW electrical cabin
b.WOR/AKC Platform: Demolition of existing HVAC system of Electrical cabin. HVAC to be tapped from another HVAC system (designed accordingly before hand to accommodate this room HVAC load). Ducting to be connected.
15 Feb 2011 to October 2014
Nov 2013 to Oct 2014
Feb 2014
DNV-GL
Senior Mechanical / HVAC Engineer for Marine and Offshore Projects
DNV and GL have merged to form DNV GL
As of 12 September 2013, DNV and GL have merged to form DNV GL.
PROJECT INVOLVEMENT
TOTAL Abu Al Bukhoosh (TABK)
Seconded to TOTAL Abu Dhabi Office
Position: Lead HVAC Engineer to the following TOTAL ABK Projects
a)AKS SAFETY UPGRADE PROJECT
Installation of a New Module to the AKS Platform. This new module shall be pressurized and shall have HVAC.
Basic Engineering
Contractor: TEBODIN
Detail Engineering
Contractor: Specialist Services
Project cancelled.
b)LQ1 Recreation Room Project
Replacement of existing Squash court and with addition of new offices.
Contractor: Specialist Services
c)LQ1 Cold Room Project
Contractor: Specialist Services
d)DERA Project Phase 2 (CNIA Tech Room HVAC Installation)
e)DERA Project Phase 3 (CNIA TOP Level Design & Installation + Security Upgrade)
UMM LULU PHASE II FULL FIELD DEVELOPMENT PROJECT
Client: ADMA-OPCO
Contractor: TECHNIP/NPCC
Scope: Third party document reviewer.
SAGAR SAMRAT CONVERSION PROJECT (MODU to MOPU)
CLIENT: ONGC
CONTRACTOR: GULF PIPING COMPANY / MERCATOR
VESSEL: SAGAR SAMRAT MODU
PERIOD: Jan 2012 to Oct 2013
Responsibilities:
Consultancy work as Lead Engineer for Mechanical / Package Engineer
MARINE SCOPE
Package Engineer for Marine
Diesel pumps and filters
Bilge and Ballast pumps
Sewage Treatment system
Potable Water System (RO Plant)
Instrument Air and Service air compressor package and Receivers
Helideck Refueling system
Treated water dump caisson
Leg Jetting pumps
Cranes
Nitrogen Generator Package
Deep well pump (Sea water system)
Oily water separators
Potable water pressure set
Sanitary water pressure set
Hot water circulation set
Fire water pumps
HVAC system
Levingston 415 WC Lift Boat
CLIENT: Levingston
SCOPE: Basic Engineering
SEP-550 Jack Up Barge Design Engineering
Client : National Petroleum Construction Company
HVAC Vendor: CCTC
NDC Al YASAT jack up Drilling Rig
CLIENT: NDC
CONTRACTOR: GULF PIPING COMPANY
Scope: Third party document reviewer.
DAS FLARES MODIFICATION/REVAMP PROJECT
Client : ADMA-OPCO
SCOPE: Design review/appraisal and certification
LETOURNEAU S116E SELF ELEVATING MOBILE OFFSHORE DRILLING UNIT
CLIENT: TALLAND NAVIGATION LIMITED CORPORATION
CONTRACTOR: COSCO (DALIAN) SHIPYARD Co. Ltd
SCOPE: Design Review
DUBAI GAS (DUGAS) SITE SURVEY
CLIENT: The Dubai Natural Gas Company Limited
SCOPE: Air heater dimension verification
2012
ADMA ZWSC ADDITIONAL 100 MBD MODIFICATION PROJECT (OUN 029)
Owner: ADMA-OPCO Abu Dhabi Marine Operating Company
EPC: National Petroleum Construction Company (NPCC)
Detail Engineering Contractor : Worley Parson
Review HVAC Documents
2011
Diesel service tanks
Owner: Aramco Gulf Operations / Kuwait Gulf Oil Company
Contractor: Alghanim International General Trading & Contracting Co.
Prepare HVAC design for additional equipment room of existing building.
RWEI Lift boat “VICTORIA MATHIAS” & “FRIEDRICH ERNESTINE”
Contractor: Daewoo Shipbuilding and Marine Engineering (DSME)
Prepare basic operational procedures for machinery and mechanical systems of the lift boat.
DSIC Jackup drilling rig project
Owner: Dalian Shipbuilding Industry Offshore Co. Ltd.
Prepare HVAC design for accommodation, machinery space and cantilever.
SOUTHPARS PHASE 11 Wellhead platform
Owner: National Iranian Oil Company (NIOC)
Contractor: China National Petroleum Offshore Engineering Co. Ltd., / Pars Oil and Gas Company (POGC)
Review HVAC FEED documents and drawings.
03 Aug 2003 to
11 Feb 2011
HI AIR KOREA Co. Ltd. (formerly HIPRES Korea Co. Ltd)
Assistant Section Manager (Team Client: TOTAL)
HVAC Design Engineer for Offshore Projects
Highly Experienced in HVAC Design
Experienced in FEED Engineering
Experienced in ATEX Certification
My role in the company includes:
Complete project management
Perform the complete design, engineering, equipment selection
Provide all necessary documentation for the design.
Prepare / audit/ verify equipment for ATEX certification.
PROJECT INVOLVEMENT
1.Sakhalin-1 Arkutun-Dagi (August 2010), Owner: ExxonMobil
2.PETROBRAS FLNG Project (July 2010), Owner: PETROBRAS, Yard: SHI
3.TOTAL PAZFLOR FPSO Project (March 2008), Owner: TOTAL. Yard: DSME
4.TOTAL CLOV FPSO Project (Dec 2008), Owner: TOTAL, Yard DSME
5.TOTAL USAN FPSO Project (Mar 2008), Owner TOTAL, Yard: HHI
6.TOTAL OFON Project (Jan 2008), Owner: TOTAL, Yard: HHI
7.H.3024 PETROSERV GA (Nov 2007), Owner: PETROSERV, Yard: DSME
8.Yantai Super M2-194 Project (April 2007), Owner Remedial Offshore, Yard: Yantai (YRS)
9.TOTAL AKPO FPSO Project (Jan 2006), Owner: TOTAL, Yard: HHI
10.RONG DOI Project (Jan 2005), Owner: Korean Nat Oil Co, Yard: HHI
11.BP PLUTONIO FPSO Project (Jan 2004), Owner: BP, Yard: HHI
2 May 2002
to
31 July 2003
FESTO Inc. (Philippines)
Project Engineer / Technical Trainer
oManages projects for factory-based pneumatic and hydraulic and installations.
oConducts training seminars for engineers, technical staffs, plant operators, instructors, technicians and the like in the field of industrial automation specifically in PNEUMATICS, ELECTO-PNEUMATICS, HYDRAULICS, ELECTRO-HYDRAULICS, PROGRAMMABLE LOGIC CONTROLLER (Basic and Advance Level), ROBOTICS, MECHATRONICS, and SUPERVISORY CONTROL AND DATA ACQUISITION (SCADA)
see SEMINARS ATTENDED for details
oConducts symposiums to different universities
16 Jan. 2002
to
30 April 2002
STAR VALUE ELECTRONICS (Philippines)
Project Engineer / Technical Support Engineer
oManage, design and install security systems (CCTVs and alarms) for commercial and private establishments.
oMakes sure that the client is well aware of everything especially updates regarding a project.
oEnsures that a project would be finished on time with high quality through preparation and planning, proper coordination and great workmanship.
oTroubleshoots products or installations that have problems.
EDUCATION
1995-2001
University of the Philippines
Bachelor of Science in Mechanical Engineering
PROFESSIONAL QUALIFICATION
2001
LICENSED MECHANICAL ENGINEER
PRC Mechanical Engineering Licensure Examination Passer (OCT 2001)
License # 59189
SEMINARS/TRAININGS ATTENDED
03 Sept 2015
MK50 Lifejacket / PSTASS Training
15 Jan 2014
Offshore Survival (Sea Survival & HUET)
16 Jan 2014
Basic H2S Training (OPITO Approved Course code – 9014)
5 Dec 2013
Basic First Aid
Basic Fire Fighting
28-March, 2012
'Solutions for HVAC and District Cooling Applications'' &
24 Feb 2012
Data Centre Energy Efficiency
24 Feb 2012
Data Centre Design and Best Practice
23 Feb 2012
Smoke Control by Pressurization
22 Feb 2012
Complying with Requirements of ASHRAE Standard 62.1-2007
22 Feb 2012
Using Standard 90.1 to Meet LEED Requirements
October 1996
Sangguniang Kabataan Leadership Training
October 1999
Integrated Sangguniang Kabataan Organizational, Leadership And Re-orientation Seminar (ISKOLAR)
Jan – Feb 2000
COMPUTER-AIDED DESIGN TRAINING PROGRAMS (AUTOCAD)
May 2,3,6 – 9 2002
Industrial PNEUMATICS ( Pneumatics and Electro Pneumatics )
May 13 – 15 2002
ANALOGUE SENSOR TECHNOLOGY and APPLICATIONS
May 16-17 2002
Industrial Hydraulics ( Hydraulics and Electro-Hydraulics )
May 27 – 29 2002
Programmable Logic Controller ( Basic Level )
May 30 – 31 2002
Programmable Logic Controller ( Advance Level )
June 4 – 7 2002
MECHATRONICS
June 24 - 28 2002
MECHATRONICS II
August 1 – 3 2002
Binary Sensor Technology & Applications
October 1- 3 2002
PNEUMATIC CONTROL AND MAINTENANCE
Nov 4 – 8 2002
SUPERVISORY CONTROL AND DATA ACQUISITION (SCADA)
PERSONAL BACKGROUND -
Born on the 18th day of August 1978 at Quezon City.
Fluent in English language. Intermediate understanding with the Korean Language.
Great skills in MS Office for documentation preparation.
Good skills in AUTOCAD, CARRIER HAP E20,
Civil Status: Married with 1 daughter
Character Reference: Shall be provided upon request
Contact this candidate