Post Job Free

Resume

Sign in

Engineer Network

Location:
Greensboro, NC
Salary:
95000
Posted:
May 21, 2017

Contact this candidate

Resume:

Femi Oludipe

Email :ac0e1x@r.postjobfree.com

Phone: 732-***-****

PROFILE

An experienced IT Network Administrator and Designer with extensive experience gained from a background in Information Management and training. Communicates well at all levels and has developed a wide range of practical IT skills. Logical and methodological in approach to work and able to work effectively at all levels of an organization with minimum supervision and meeting set deadlines.

CERTIFICATION

Cisco Routing and Switching (CCIE Written)

Cisco Certified Network Professional (CCNP)

Cisco Certified Network Associate (CCNA)

Microsoft Certified System Engineer (MCSE)

SKILLS SUMMARY

●Achieved in depth knowledge of design &operation of computer system and data network . Classifying networks by means of transmission method. Packet networks covering LAN, WAN and Bandwidth used & type of signal, network layer of protocols and internet working, including X25, Frame-Relay, SNMP,TCP/IP, Bridges, Gateways and routers.

●Also gained an understanding of advance digital transmission system ISDN, ATM frame relay and new switching techniques and services. Digital Cellular Systems for mobile & wireless communications, data integrity and security including firewalls.

●Using network management and monitoring tools such as CiscoWorks2000, HP Open view, Network Associates (packets Sniffer).

Routing

OSPF, IGRP, EIGRP, RIP, BGP. TCP/IP, UDP, ARP, RARP, ICMP, RIP (V1 & V2), IS-IS

Switching

VLANS,Etherchannel,STP,RSTP,VTP,SPAN, MPLS

Security

Access Lists, Cisco ASA 5500, IPsec/SSL VPN, C AAA.

Networking Technologies

Ethernet/Fast Ethernet 802.3, Gigabit Ethernet, 802.1q, STP, RSTP, PVST, VLAN, VPN, Frame Relay, Point-to-Point, MPLS, ATM, HDLC, ISDN, SNMP, SMTP, FTP, DHCP, DNS, NAT

Domain experience

Network Infrastructure services and Network Support

Switches

Cisco Switches 2900, 3550, 3560, 3750, 4500, 6000 and 6500 series

Routers

Cisco Routers 1900,2600,2900,3600,3700,3800,3900,6524,7200, 7600, 12000, CRS-1, CRS-3.

CommScope

November 2016 UP-To-Date

Senior Network Engineer,

Cutover Commscope Network across United State and Mexico sites.

Power off legacy TE Cores, and move connection to new CommScope core.

Configure temporary L3 routed interface on new core and legacy TE aggregation and MDF Switch and connect cable to allow direct access.

Running copper cable and Hardcode legacy TE core and access switch trunk port.

Created Vlan layer 3 interface on VTP server

Converted legacy TE switches to VTP transparent mode and VTP version 2 and ensure all vlans are created locally.

Change spanning-tree priority for all Vlans on legacy TE access switches to 49152

Change spanning-tree priority for all Vlans on legacy TE aggregation to 36864

Convert Legacy TE switches to Rapid-PVST.

Configure root-guard on legacy TE switch where appropriate.

Connect cables between Legacy TE aggregation and MDF access switch to new Commscope core.

Prepared environment for ipv6.

Configure port-channel and switch ports for connectivity to TE legacy aggregation and MDF switches

Create legacy SVI and L3 interfaces in the appropriate VRFs for example,Red, Blue, pink, and Global Table Green.

Using Fluke network to identified trace switch, port and Vlan connected.

Configure on 39000 switches and 4300 routers.

Configure SG300 Switches by log into switches using HTTPS with given credential by

Disable and enable https.

Troubleshooting patch Pord, cable and replace with right fiber cable and SFP.

Configure the time clock with switch port access VLAN as recommended and enable spanning-tree bpduguard enable.

Creating different Vlan on different IDF within Commscope production environment.

Failover testing with Router and Swithes.

Removed old legacy riverbed device and Aruba wireless from the Rack and patch the cable with label.

Wipro Limited

End Client Vf Corporation 02/2014 To September 2016

Senior Network Engineer

●Train the offshore on level-1 and Level-2 Troubleshooting VFC Network topology.

●Meeting with Governance on weekly basis.

●Attending multiple conference on daily basis regarding VFC Incident ticket.

●Attending meeting with stakeholder and 3rdparty vendor.

●Maintain and troubleshoot a wide-range of Cisco routers such as 6500,4500,2900 series, 3900,3800,2800,2600,1800,800 series.

●Interact with vendors, peers, and contractors to ensure secure, reliable systems implementations and upgrades are performed within project parameters .

●Respond to emergency network outages in accordance with business continuity and disaster recovery plans, assisting other departments as required .

●Provides recommendations to senior or executive IT management regarding product/vendor selection, technology evolution, and design strategies.

●Provide root cause analysis and develop and execute corrective action plans for resolution of complex technical issues related to platform and service performance disruptions.

●Huge team player where always pushes peers to achieve their best.

●MPLS switching and IPV6.

●Expert knowledge in implementing AAA (Radius).

●Expert knowledge in configuration and implementation of routing protocols RIPv1 and RIPv2.

●Expert knowledge in configuration, implementation, and tuning of EIGRP routing protocol.

●Expert knowledge configuring, tuning, deploying OSPF routing protocol with NSSA, Stub, and totally stub environments.

●Excellent knowledge of BGP and its implementations and security features related to it.

●Good knowledge of IS-IS routing protocol and design implementations.

●Expert knowledge of Frame-Relay technology and its implementation considerations.

●Expert & working knowledge of TCP/IP protocol stack and its implementations variations.

●Worked in environments where VLSM, CIDR implementations were required.

●Very good knowledge of WAN technologies such as DSL, ADSL, ISDN, and T1.

●Implemented dynamic routing within IEEE’s private WAN infrastructure. This project used open standards routing protocols such as BGP and OSPF.

●Ability to absorb and retain information quickly.

●Ability to present ideas in user-friendly language to non-technical staff and end users.

●Keen attention to detail.

●Proven analytical and problem-solving abilities.

●Ability to effectively prioritize and execute tasks in a high-pressure environment.

●Exceptional customer service orientation.

●Experience working in a team-oriented, collaborative environment.

●Experience in designing networks from layer 1 to layer 3.

●Experience configuring and maintaining Layer2/3 Switches and Routers and building switch stacks.

Wipro Limited

End Client City Bank 11/2014-02/2015

Technical Team Lead

●Network Design Network Infrastructurefor City Bank.

●Work with Citi project Manager to finalize the detail of Bill of Material for final product.

●Prepare configuration templates base upon City GNAST standard for each device and standardization of the environment.

●Work with Citi Bank SME teams, in region and globally, to develop design documents following the bill of material configuration approval and which include hard ware designs.

●Work with Citi Bank teams to ensure the initial changes on the configuration template are correct and assist in resolving any implementation issues.

●Installation of cisco equipment and implementation for scope of work.

●Work with Citi Bank to receive POS and place the orders to cisco with appropriate discounting.

●Deliver devices to centralized ware house or direct to countries.

●Verify the Bill of Material and Identify for dead on arrival and then ship the hardware to respective countries.

●Complete formalities like export licenses, customer clearance, required documentation before shipping the devices to the countries.

●Work closely with Citi Bank Project Manager and deliver on priority.

●Attending weekly conference with city Bank.

●Reporting to Manager and stake holder.

●Liaison with off shore Engineer on day Network design and implementation of city bank.

Kings Health LLC Dallas Texas 11/2012-11/2014 Senior Network Engineer

●Liaison with Business Manager and System Strategy Representatives to define a solution that is accurate, timely, and configurable.

●Business and IT Requirement Determination, Documentation and System Modeling.

●Developing High Level Design Documentation and Contractual Proposal to Meet Business Requirements.

●Product Implementation and Management Support Structure throughout the Product Life Cycle.

●Stakeholder Management and Reporting to time, cost and quality expectations throughout Product Life Cycle and Service Management and Approval.

●Ensuring that solution delivered conforms with, and contributes to, the business strategy.

●To ensure that the services delivered comply with commercial and control policies from line of business and entity perspectives.

●Contribute to increased operational efficiency and reduced operational risk and associated costs.

●Provide reporting for daily and ad-hoc use which can be used by operations and senior management.

●Configure F5 Load balance for fail over on Wide Area Network.

●Configure Routing protocol BGP Route Reflector and support Juniper.

●Authored all release & support documentation.

●Installation, configuration and monitoring Network Management.

●Managing and troubleshooting LAN & WAN Provide support sites network .

●Configure ipv6 unicast on interface gigabit ethernet .

●Work with team of engineers, participated in a project, which involves design of and implementing Firewalls.

●Configure DHCP NAT, DNS SMTP, HSRP for a Remote Network.

●Configure spanning, Ospf, bgp, Tree and vpc Nexus 7000.

American Airlines Dallas Texas 02/2011-11/2012 Senior Network Engineer

●nCompass - Development of dashboard, running analysis, configuring event alarm and notifications, reporting.

●IT Sentinel - Auditing 5000+ node networks. Automating scheduled task such as network standards and PCI compliance and network drawings.

●IT Guru Network Planner - Build and run flow analysis and DES simulation. Troubleshoot network and application performance issues.

●ACE Analysis - Trace analysis, identifying problem areas, and reporting.

●VNE Server - Importing network objects via automation tools and manual imports.

●Troubleshooting and optimizing data base.

●Running weekly and monthly reports.

●Experienced in troubleshooting network related issues, routers, L2/L3 switches. Also have a good understanding of network protocols (Ethernet, TCP/IP, SNMP, ISIS -LEVEL 1-2 VLAN Trunking), routing protocols (BGP, EIGRP, OSPF, RIP), network technologies, and LAN technologies.

●Good understanding of QoS, and policy-based routing with Cisco IOS.

●Interact with teams across multiple platforms and in varying environments.

●Load Balancing configure with F5.

●Configure Eigrp and Ospf on Nexus 7000 .

Kings Health LLC Dallas Texas 01/2009-12/2010 Senior Network Engineer

●using HP Open view to monitor connectivity of route and switches and also pro- active troubleshooting and resolve escalation day to day.

●Load Balancing configure with F5.

●Authored all release & support documentation.

●Installation, configuration and monitoring Network Management.

●Managing and troubleshooting LAN & WAN Provide support sites network .

●Configure ipv6 uni cast on interface giga bit ethernet .

●Work with team of engineers, participated in a project, which involves design of and implementing Firewalls.

●Design Network with OSPF, EIGRP, with BGP,ISIS -L2 Configure BGP policy also with VPN and redistribute routing protocol.

●Configure Cisco 6500 core switches.

●Configured and supporting Voice over IP, ATM, BGP, ISDN, DLSW.

●Using company policy to configure DMZ on VPN.

●Configure DHCP NAT, DNS SMTP, HSRP for a Remote Networ.

British Telecom, England Uk

System Administrator May 2006 Dec 2008.

●Installation and configuration and support HP OpenView & Cisco works.

●configure MPLS with VPN 7600 router Provider Edge router and exchange routes with Customer Edge router.

●configure MPLS with BGP 6500 router with Provider Edge router traverse data to Customer Edge router.

●Using monitoring tools Tacacs, HP Openview, and to monitoring the connectivity of hub and spoke.

●Configure ATM with PVC and CVS (qsaal,ilmi).

●Configure BGP with confederation and Route reflector with different AS.

●Migration of server in data center.

●Configure Vlan s and installation of switches across multiple sites.

●Supporting VPN with Gateway Load balancing Protocol.

●Configure router 25 00,36,00,4500,47,00 72,00.

●Configure NTP authentication recurring, NTP Master, Ntp authentication and Ntp peer.

●Involved with the design of servers and the drafting of documentation for delivering and supporting the platform and relevant applications.

Sony Ericsson, Munich Germany

System Administrator Oct 2005 to May 2006.

●Configuration of various software, profiles, and policies to manage user access to installed applications.

●Installation and configuration and also support HP Open View and Cisco works.

●Work with team of engineers, participated in a project, which involves design of and implementing Firewalls between LAN.

●Installation, supporting, and monitoring tools. Tacacs +and HP Open view, Sniffer and exposure to Opnet skill (Network management Enterprises).

●Configure ATM with PVC and CVS (qsaal,ilmi).

●Configure BGP with confederation and Route reflector with different AS.

●Configure Spanning - Tree Vlan s and installation of switches across multiple sites.

●Configure DHCP NAT, DNS SMTP, HSRP for a Remote Network.

●Configure NTP authentication recurring, NTP Master, Ntp authentication and Ntp peer.

●Advising on methods of enhancing systems for better management with reduced overheads.

●Arranging and coordinating pre- implementation and post-implementation testing and functionality.

●Managed projects from system design and specification to implementation.

●WAN/LAN administration including the provision of implementation knowledge and experience in network technologies in the area of wide area network design.

●Configuring, procuring, installing, and supporting server based computing technology.

●St. MaryNHS Hospital Trust Hospital.

●SUPPORT ENGINEER January22 2005 October 2005.

●Manage the network, which is operated on the three sites that make up the St. Mary? Hospital Trust.

●Manage the implementation and standardization of the roll out of new PCs (1200 new PCs have been rolled out by the department whilst l was with the organization).

●Configure pint queues on both the Net Ware and NT Network.

●Develop and implement network-wide data backup strategies using third-party software, which include Seagate and ArcServe.

●Work with external support firms in the maintenance of the hospital network infrastructure, which include cabling, network tuning and monitoring hubs, routers, and bridges.

●Responsible for the allocation of IP addresses, configuring user profiles, and organizing the installation of relevant software on end user workstations.

●Maintenance and configuration of the Exchange Servers and MS Mail Server which include creating new user accounts, configuring connectors for external e-mails, migration of users from MS Mail to MS Exchange and monitoring the security of e-mail transfer between local and external networks.

●Developed strategy for monitoring the anti-virus policy within the hospital trust.

●Worked in partnership with external contractors in developing and implementing the hospital Intranet site and associated firewall strategy.

EDUCATION

EAST LONDON UNIVERSITY U.K. 01/2004-01/2006

MASTER INFORMATION SECURITY AND COMPUTER FORENSICS

INTERESTS & HOBBIES

Enjoy listening to jazz music, reading about current research and development in the IT field.

REFEREES

Available on request

Citizen

U.S Citizen.



Contact this candidate