RUDY RAMIREZ

**** ********** ***, *********, ** *5747 916-***-**** ac01lv@r.postjobfree.com

OBJECTIVE:

To be an engineering technician that would utilize my strong problem solving and communication skills to contribute towards the success of your company.

ENGINEERING TECHNICIAN

Many years of Engineering experience with increased responsibility and proven performance in product development and testing. Organized professional with expertise in managing projects from concept to delivery independently or in a team environment.

TECHNICAL SKILLS:

Electronics assembly Soldering Electronics testing equipment Component Level Testing • SAP

Microsoft Word Microsoft Excel Microsoft Outlook Microsoft Power Point Window OS

PROFESSIONAL EXPERIENCE:

Mia Sole, Santa Clara, CA 2017 – Present

*Assembly of manufacturing tool for flexible solar panel. Final test and validation of manufacturing equipment for flexible solar panels. Process chamber are very similar to semiconductor manufacturing process equipment.

*Execute final testing using Mia Sole manufacturing process tools and supportive software tools ORACLE for piece part identification for specific process module.

*Execute specific test steps per process module type which is specified in the Assembly process for final testing to ensure first time operation and accuracy during manufacturing process.

LAM RESEARCH CORPORATION, Livermore, CA 2016- 2017

Manufacturing Technician

*Final test and validation of process modules for semiconductor manufacturing.

*Execute final testing using LAM manufacturing process tools and supportive software tools SAP for piece part identification for specific process module.

*Execute specific test steps per process module type which is specified in the Operating Methods Sheet tool for final testing to ensure first time operation and accuracy during manufacturing.

Intel Corporation Folsom, CA 2000 - 2016

Quality and Reliability Technician

Performed ATE testing of Intel Chipset devices along with full RV and Schmoo scanning to determine unit marginality for lot of units being tested.

Perform burn in testing of units to support and meet all the qualification requirements for PRQ of product and revision for HVM for company utilizing Self heat Burn-In system.

Provide product planning and material lot creation and lot scheduling for test floor testing utilizing ATE testers, Vortex, and MOLE.

Electronics Competitive Analysis Technician 2007 - 2012

Responsible for analyzing competitor’s products, which compete with Intel products in specific market segments. Provide full analysis of these platforms to define Intel’s lead or lag position in the market segments.

Developed detailed summary and product definition such as semiconductor fabrication technologies used in product along with specific advantages and features. This specific

RUDY RAMIREZ Page 2

Information allows product development teams to make better product decisions to define product plans of record.

Used various electronic lab tools and methodologies to accomplish the platform analysis metrics such as BGA rework tools, Precision table saw and precision polishing tool along with Stereo and compound microscopes and Scanning Electron Beam microscope and EDX chamber for material analysis.

Utilized 2D and 3D XRAY tools used to measure product features to validate analysis findings.

Word, Excel, Outlook, Power Point, AutoCAD

Electronics Package Designer 2006 - 2007

*I was responsible for creating substrate designs for Intel chipset products which included all collaterals drawings, analysis reports and documents for release HVM. I participated in product design working groups for product development. The substrate designs had to be created and design to account for all design rules and product technology process nodes requirements for the device.

*Word, Excel, Outlook, Power Point, AutoCAD, Cadence Allegro

Electronics engineering technician 2000 - 2006

*I was responsible for creating wire bond drawings for substrate designs for Intel wireless products which included all collaterals drawings, analysis reports and documents for release HVM. I participated in product design working groups for product development. The substrate designs had to be created and design to account for all design rules and product technology process nodes requirements for the device.

*I was responsible for electrical testing, curve tracing for opens and shorts of test chips designs and environmental testing steps for qualification for product development to ensure product readiness.

*I was responsible for mechanical cross sections to determine FA results for test chips designs along with CSAM scanning of these failed devices for FA reports.

*Word, Excel, Outlook, Power Point, AutoCAD, Cadence Allegro

Output Technology Solutions El Dorado Hills, CA 1999 - 2000

Mechanical Designer

*Developed document-handling equipment for printing billing statements for external customers for various industries. My work initially was to document all beta and production changes on printing and collating machinery. Worked on control cabinet for Automated Container Line, which was used in large-scale production for performing statement creation.

*SolidWorks, AutoCad, Smart Team

VERIFONE INC, Rocklin, CA 1998 - 1999

Mechanical Engineer

*Developed a Handheld electronic terminal for use in the retailing environment. Initially an outside industrial design firm with VFI’s input designed this terminal and Base Station. My work initially was to create documentation for the Base Station of the handheld terminal. This effort involved creating documents, Fabrication Drawings, Assy Drawing, Components Specifications also PCB Constraint Drawings and Product Drawing trees. I also created documentation for the Battery Charger for Handheld terminal and the handheld terminal itself.

*The Base Station and Battery Charger were fully developed but the need for this product was not there at this time and these products are awaiting further development of the handheld terminal.

*SDRC Master Series, Solid Works

RUDY RAMIREZ Page 3

SILICON VALLEY GROUP, San Jose, CA 1997 - 1998

Mechanical Designer Sr.

*Created hardware for thermal processing of 300mm tool. The Hardware was designed with analytical data that was incorporated in the final design. Working in a cross-functional team environment on this project.

*Large sub-assy of thermal module was conceptualized and detailed on time for delivery of first article.

*Worked with project engineering staff to develop hardware that was designed to fit within footprint of tool.

*Thermal modules consisted of pneumatic, Electro-mechanical motion control and thermal cycling.

*SDRC Master Series, AutoCAD

PERCLOSE, Menlo Park, CA 1997 - 1997

Product Development Engineering Specialist

*Worked in a team environment conceptualizing new designs for a vascular medical device.

*Generated vendor specifications, material process instructions, test protocols and test reports. Kept design history log, to document device evolution and observations discovered during bench Model testing and deployment.

*Participated in animal studies, and tested validations of device to meet FDA regulations.

*Designed prototype of vascular device and manufacturing process equipment, and created solid modeling of device components and device assembly. Work closely with model shop to produce prototypes of device and its components.

*SDRC Master Series, Lab View

PHILIPS MOBILE COMPUTING GROUP, Sunnyvale, CA 1996 - 1997

Manufacturing Engineer

*Involved in the manufacture of handheld PC for product launch at an electronics trade show. Working directly with design engineering and overseas manufacturer, to debug PC productions problems and bring resolution to manufacturing discrepancies and assembly problems.

*Worked closely with software developer to ensure PC performance met product specification. Worked with outside vendors to fabricate PC housing, and debug tooling problems.

*Lead the electronic assemblers during assembly in order to meet product launch milestone.

*Worked to define plastic mold defects and correct them in the hard tooling.

LAM RESEARCH CORPORATION, Fremont, CA 1995 - 1996

Mechanical Designer II

*Created hardware for human interface of CVD Machine. The Components accommodated Manufacturing and fabrication inaccuracies and led to a significant cost savings per machine. Hardware was conceptualized, detailed, and fabricated within three weeks. This exceeded the customer’s delivery requirement and decreased manufacturing time needed for each machine.

*Worked with project engineer to develop customer continuous improvement tool, which was a lifting fixture for customer fabrication house. Based design on OEM lift manufacture. Designed additional hardware to achieve safe load manipulation.

*Designed Sheet Metal & Plastics used throughout projects for machine components. Fabrication of these components required strong communication skills to ensure accuracy.

*Collaborated with a mechanical engineer to configure a vacuum system design of fore line trap. This item became a line product for the company.

*Created retrofit kit for machines already in use to incorporate all machines upgrades. This allowed older version machines to be brought up to date without latest system configurations.

RUDY RAMIREZ Page 4

*Responded to a critical customer need, which involved designing, procuring, fabricating, and delivering a retrofit kit shipment in less than 24 hours.

*Designed as Lead in charge of several drafters. Coordinated and scheduled designs with drafters to complete drawings within promised time frame.

*Held both subcontractor and personal concept design reviews pertaining to the projects.

*SDRC Master Series

LOCKHEED MISSILES AND SPACE COMPANY, Palo Alto, CA 1990 - 1995

Mechanical Design Engineer

*Designed flight critical assemblies and components for Science Mission Instrument.

*Interacted with customers and vendors in negotiating requirements and critical design interfaces.

*Used mechanism design when hardware manipulation required this approach to solve a problem.

*Worked directly with project lead from the design through manufacturing phase.

*In charge of subassembly design, manufacturability, and clean room assembly of hardware.

*SDRC Master Series, Pro-Engineer, CADAM 2D & 3D

Engineering Drafting Specialist 1987 - 1990

*Originated and developed designs of complex operations of mechanical and electromechanical systems and components.

*Analyzed specific design factors and requirements in order to achieve optimum design integrity including ease of fabrication and cost effectiveness.

*Organized, developed and conducted research studies and investigations or analysis toward the solution of moderately complex technical problems.

*Conducted studies, investigations and analysis for improving reliability, production value engineering or quality assurance problems.

*Gathered and analyzed technical information necessary to accomplish assigned tasks. Prepared documents, drawings, milestone charts, and spreadsheets to convey task status and priorities.

EDUCATION:

*AS, Mechanical Design Drafting, West Valley College-Completed

*BSEE, Electronics Engineering CSUS Sacramento State University-WIP

Contact this candidate