Electrical Engineer

CURRICULUM VITAE

Name : Rex Amulong Payaban

Email Address : **********@*****.***

Position : PDMS/MDS Electrical Design Engineer

Nationality : Filipino

Qualifications : 1994 – 2001

Bachelor degree in Electrical Engineering at

Technological Institute of the Philippines

REE – Registered Electrical Engineer, PRC # 0029840

RME – Registered Master Electrician, PRC # 0026203

Languages : English and Filipino (Tagalog)

Date of Birth : September 22, 1977

Status : Married

Nos. of Children : Two lovely daughters

Home address : Tolentino East, Tagaytay City, Philippines

Mobile number : +639********* (mobile)

Studied : Bachelor of Science in Electrical Engineering

Software experiences:

PDS Plant Design System (Equipment Modelling & EE Raceway)

PDMS (Plant Design Management System; ver 11.6, ver 12.0 & ver. 12.1.SP2, ver. 12.1 SP4)

MDS (Multi-discipline support)

AutoCAD, Microstation, Cooper Luxicon,Chalmlite

Smart Plant Review (SPR) and Naviswork

Knowledgeable in Smart Plant Electrical (SPEL)

MCT software (vendor provided)

Trainings:

PDS (EEraceway & Equipment Modelling)

PDMS (Cable ladder/tray and equipment modelling)

Microstation,

Industrial Electricity

Christian Training

BOSIET Training

General:

More than Fifteen years of extensive international experience in Electrical Design for both onshore and offshore. Oil and Gas experience includes, FEED, Conceptual and Detailed design for Petrochemical, oil and gas, clean fuel projects to be built abroad and on floating platforms (FPSO and wellheads; offshore & onshore).

Experience includes Brownfield, Greenfield projects and Demolition Scope. Local experience include supervisory level on water distribution system and building maintenance.

Able to deliver task assigned and able to guide electrical designer/drafter as required. Conduct site visit/survey based on a checklist prepared prior to site visit. Well experienced in Cable Ladder/tray routing, secondary tray route, supports both cable ladders/trays and equipment, detailed model as required by projects.

Fabrication yard experience prepares detail supports, secondary cable tray layout, piecemark drawings, bill of materials, checking of cable tray routing via PDMS and naviswork simultaneously, discuss with the other checker to optimize and to maximize common support. Cable tray re-routing as required using PDMS.

Proficient in using design software such as PDS, PDMS, MDS (Multi-Discipline Support) Microstation, AutoCAD, Luxicon, Chalmit, Roxtec, Navisworks and Smartplant review. Knowledgeable on SPEL (Smartplant electrical) as well. Most of oil and gas projects were delivered by using 3D software.

Work experiences:

McDermott Engineering (under AL-AJMI engineering agency)

Al-khobar, Kingdom of Saudi arabia

Senior Electrical Designer

Aug. 2, 2016 – March 9, 2017

(Offshore)

Project Involve in:

Replace Power Generation system – MARJAN GOSP’s PROJECT

(Brownfield project - Two complex platforms; GOSP 2 & GOSP 3) - Saudi Aramco project

PDMS experience – Optimizing MV, LV and Instrument cable tray routing. Review on a daily basis regarding design issues with other discipline and closely coordinate with lead engineer for design inputs. Model Supports for electrical and instruments cable trays using MDS (multi-discipline support). Attend model reviews as required internally and with the client. Extracted drawing such as cable tray layout, cable support layout, from PDMS converted to microstation, prepare deliverables as assigned by lead. Extract MTO (Material Take Off) for cable ladders (E&I), perforated trays and E&I Supports MTO from PDMS and counter checking on layouts. Discussed and coordinate with other discipline to optimize design, supports and other related design issues. Supervise electrical designer on generating layouts and counter checking on the model once the layout is ready for issuance. Modelling of electrical equipment such as panel, lightings, JB’s, and other electrical equipment required by the project. Re-route conduit based on a new location of replaced lighting. Revise model/drawing as required. Generate support detail for electrical and instrument system using MDS (Multi-Discipline Support).

AG&P (ATLANTIC GULF AND PACIFIC COMPANY OF MANILA INC.)

San Rouqe Bauan, Batangas

As E&I detailer/PDMS Design Engineer

July 2015 – Nov. 2015

(ONSHORE)

Project Involve in:

YAMAL LNG PROJECT – RUSSIA

(Module Fabrication)

PDMS experience – Optimizing secondary cable tray routing for all system such as, Field Instrument, PAGA, Fire and Gas, Lighting & Small power, Field Instrument air and Heat tracing cable tray. Provide detail support using PDMS as per client standard. Extract PDMS model into DRAFT for AutoCAD drawing issuance, provide other PDMS draft drawing to other E&I detailer as well. Supervise PDMS operator for design inputs. Checking of 2D layouts as per PDMS model. Review model everyday and discuss with other checker regarding common support provision.

Autocad experience – Generate support drawings details and layout for all modelled secondary cable tray for electrical and instrument system.

DAMIT WORLEYPARSONS ENGINEERING SDN. BHD Brunei, Darussalam

As Senior Electrical PDMS Designer

Sept. 2011 – Apr. 30, 2015

(ONSHORE)

Project Involves in:

Darat Water Management Project- CONCEPTUAL DESIGN

(Brownfield package, Greenfield package & Demolition package)

DEPO Phase II (TG-31, E38/E39 & E32/F32) CONCEPTUAL DESIGN

(Brownfield – 3 packages)

DEPO Phase II (TG-31, E38/E39 & E32/F32) DETAILED DESIGN

(Brownfield – 3 packages)

Brunei LNG Rejuvenation Projects – EDU, CONCEPTUAL DESIGN (Brownfield package)

Plant visited/surveyed:

Main Intake Station (MIS)

E32B Substation

TG31 Control Building

E38 Substation

(OFFSHORE)

CPAP40 Champion Water Flood – B23 Greenfield DETAIL DESIGN

CPLQ07 Store Conversion – DETAIL DESIGN

IDDJ01 Deck Pile extension – DETAIL DESIGN

BULAN-BULAN PROJECTS – CONCEPTUAL DESIGN (Brownfield

package & Greenfield package)

Platform visited/surveyed:

Champion 7 Complex

Ampa 09 Complex

Ampa 06 Complex

Farely 04 Complex

CPDP36, CWDP01

PDMS experience - Design & Modelling of cable ladder/tray using PDMS for offshore design platforms both in PDMS and in 2d layouts including electrical equipment for reference as per project requirement. Creating

PDMS equipment model for layout purposes such as lighting pole assembly including all kinds of lighting installation, junction box installation, rcu model including installation and any related electrical installation details.all pdms model for electrical equipment are accordingto SHELL standard drawings. Extracting PDMS model into 2d using PDMS draft module. Daily checking of PDMS model, evaluate, discuss with other discipline and incorporate comments or changes into the model. Discuss with other discipline for design issues. Attend milestone PDMS review.. Daily check of pdms model using naviswork software.

Autocad experience – Generate drawings for all modelled electrical equipment from PDMS 3D including installation details, interconnection diagram, schematics diagram, cable block diagram, earthing layout, lightning layout (based on lighting calculation), cable trench layout, cable ladder/tray layout and equipment layout. Prepare checkprint drawings, backcheck and focal point code-A and TA code-A for each discipline as required. Request drawings from BSP drawing office for new drawing and existing drawings for particular project use. Self-checking layout versus pdms model.

Other experience –Prepare package Deliverables (Demolition/removal package, Brownfield package & Greenfield package),prepare bulk MTO for all materials needed for particular project including SAP material number and SAP material description. Prepare and update lighting calculation using chalmit software. Cable Ladder/tray sizing as required. Prepare and issue IDC (inter-discipline check) drawings. Review and comment from other discipline IDC. Incorporate all comments from engineers, lead engineer and other discipline’s comment as needed prior to issuance of packages. Request, prepare and update existing cable schedule and for new cable schedule including removal of cables from existing cable schedule. Conduct site visit per project. Survey of layout to be done particularly for cable ladder/tray layout for offshore and cable trenches for onshore projects. Prepare and update MCT layout.

Akersolutions Engineering, SDN BHD Malaysia

As PDMS engineer

May 2006 – Aug 2011

Projects Involves in:

KBB Northern Hub Project (DETAILED), Malaysia

PM329 East Piatu Development Project (DETAILED), Malaysia

ICP-R, MHS Re-Development Phase-II (DETAILED), India

KBB Northern Hub Project (FEED), Malaysia

Su Tu Trang Long Term Production (FEED), Vietnam

B-193 Field Development (DETAILED), Malaysia

BO-A Central Processing Platform (DETAILED), Malaysia

VASAI East Development Project (DETAILED), India

As PDS Engineer (PDS: raceway and equipment modelling)

Project Involves in:

BCP-B2 Booster Compressor Platform Project (DETAILED), India

Modelling of cable tray using EEraceway and PDMS for offshore design platforms. Extract model to 2d layout and update. Incorporating detailed electrical equipment such as lighting, RCU, junction boxes, electrical panels into PDMS as per client request. Generate drawings such as installation details for Earthing, Lighting, cable routing layout and cable tray/ladder layout. Update and incorporate comments during model reviews. Well coordinated with other discipline and with the client as well. Attend Model reviews, review and comment on vendor drawings. Extract Drawings using PDMS Draft Module and coordinate with other designer regarding model updates, changes and revision. Cable schedules, nameplate schedule, single line diagram, cable ladder sizing, Lighting calculation, Equipment Layout, MCT, Block Diagram and MTO as well.

PDMS input include the ff: ladder/tray, lighting model (including any kind of lighting and installation details), RCU model, ladder/tray supports, power JB model, busduct route, nav-aid model, helideck lighting model, foghorn model and other misc bulk items.

Fluor Daniel, Inc. Philippines Alabang, Philippines

Electrical Designer (PDS)

Jan 2005 – Apr 2006

Project Involves in:

Bohai Phase II Development Project, (FPSO), China (DETAILED)

Modelling of Lighting using PDS equipment modelling and cable trays using EEraceway Extract model to 2d layout and update. Ligthing Calculation using Luxicon Software. Generate drawings such as installation details for Earthing, Lighting and cable tray. Update and Incorporate comments.

Fluor Daniel, Inc. Philippines

Electrical Designer (PDS; equipment modelling)

Jul 2004 – Dec 2004

Project Involves in:

Szorb, Louisiana U.S.A

(DETAILED)

Modelling of Ligthing using PDS equipment modelling. Extract model to 2d layout and update. Ligthing Calculation using Luxicon Software.

TAGAYTAY CITY WATER DISTRICT Tagaytay City, Philippines

Overall Supervisor

Mar 2003 – Jun 2004

As OVERALL SUPERVISOR in water distribution, experience includes manpower supervision, schedules of duties of 60 pump operators, supervisions of electrical technician for nine generators, 16 pumping station operations, and electrical requisitions. Responsibilities includes, being project engineer to a new project (cable sizing, Circuit breaker rating, design preparation and construction). Attend biddings, meetings with contractor, conduct bacteriology test in weekly basis. Check and review all electrical vendor supplied materials. Prepared and applied all necessary documents for application for Electrical service for new pumping station.

FTTM (Full-Time Training in Malabon) p City, Philippines

Building Maintenance

Jan 2002 – Feb 2003

While Attending Christian Training, I played as one of the building maintenance for all Electrical Equipment. Prepared and assisted sound system preparation, check and replace Lightings. Electrical Requisition as well.

Fluor Daniel, Inc. Philippines

Drafter/Designer (PDS; equipment modelling)

July 2001 – Jan 2002

Project Involves in:

Linden (Duke/Fluor Daniel) Project (DETAILED)

Updates Drawings such as Lighting Layout and Grounding Layout using Microstation software.

Contact this candidate