Engineer Electrical- Engineering Design

Cyrus Yaghoubian

Home Phone: 310-***-****

Email: ******@*****.***

June 2013

Objective

EXPERIENCED ELECTRICAL ENGIhttp://www.postjobfree.com/post-resume?t=&jid=i9bui7#NEER seeks a position with a progressive

organization that will utilize a successful career to meet/exceed company

goals in design and implementation of electrical distribution, substations,

and transmission for industrial, municipal, and commercial projects

Relevant Projects

Participated in design until completion of the job for electrical power

distribution and generation systems (LV and MV up to 138 kV), and other

electrical systems of counties, cities and residential, commercial,

industrial complexes, and all related facilities.

Some of the projects involved as the electrical engineer were as follows:

. Counties and cities transmission and distribution network including

substations and transmission lines

. Petrochemical plant and refinery, Hydrogen plant, Oil plant, steel

plant

. Iron, copper and coal mines and concentration facilities for these

plants

. Municipal and industrial water and waste water facilities and water

treatment plants, pipe lines, pump stations

. Shipping port terminal,airport terminal, raw material receiving and

material handling systems

Summary of Qualifications

. Electrical conceptual, basic, and detailed design including electrical

system calculations (such as load flow and voltage drop, motor starting,

short circuit, arc flash, relay setting, Technical specs, drawings,

RFI, RFP, budget estimation and MTO, for:

- Electrical distribution system (normal and emergency), including

HV/MV/LV substations and all related switchgears/boards, panels,

power centers, MCC's, with the related equipment including protective

relaying, generating stations, transmission lines, area

classification, power factor correction, bare conductor for

transmission line, wiring /cabling and relevant raceways such as

conduit/tray works, manhole, direct burial, indoor / outdoor bus work

- Lighting (indoor/ outdoor)

- Grounding, lightning protection

. Familiar with American standards and codes such as IEEE, NEC, Title Act

24, and IES (for Illumination), and international and European standards

such as IEC, DIN (VDE), and B.S.

. Hands on experience with AutoCAD, Bently, Revit, and similar software,

and worked with PLS CADD

Engineering software

Experienced with engineering software such as:

. Electrical system study- ETAP, SKM

. CADD PLS, PV sys, etc.

. Lighting calculations and checking, Visual, COMCheck

. AutoCAD and similar

Engagement History

. 2009-present: Self employed, I gave technical consultant on electrical

engineering to engineering companies, also as an electrical engineer

prepared Buy / Sell offers for low power diesel generators, wind

generators, and solar panels.

Substation & transmission line projects:

> Modification and addition of new substations to several substations

in an electrical system containing 69, 33, 11, 4.16 kV, and LV

voltages, generation, and 33 and 11 kV transmission lines and cables

> Modification and addition of new substations to several substations

in an electrical system containing 69, 33, 11, 4.16 kV, and LV

voltages, with 3 sets of 2700 kW and 2 sets of 6300 kW generation,

and 33 and 11 kV transmission lines and cables and electrical system

study

> New Gas conditioning plant with 69/11 kV and 11 kV/ LV substations

and generation system

> Modification of 4.16 kV and LV substations and bus ducts

. 2008: P2S engineering, Inc. - Long Beach, California office, senior

electrical engineer for design of new and modification of the existing

electrical MV and LV panels of oil industry and universities located in

Los Angeles County.

Substation & transmission line projects:

> Modification of several substations in an electrical system

containing 138, 69, 33, 11, 4.16 kV, and LV voltages, generation,

and 69, 33 and 11 kV transmission lines and cables and electrical

system study and relay coordination

. 2007- 08: TECHNIP USA engineering company - Claremont, California office,

senior electrical engineer, as a team leader for design of electrical

systems including 69 kV incoming substation and other MV/LV panels for

expansion of a refinery plants. The company is specialist in Hydrogen and

Petrochemical plants.

Substation & transmission line projects:

> Three substations in an electrical system containing 69, 13.8, 4.16

kV, and LV voltages, and electrical system study and relay

coordination

> Three substations in an electrical system containing 138, 13.8,

4.16 kV, and LV voltages

. 2006-07: Carollo Engineers-Fountain Valley office-California, senior

electrical engineer. The company is specialist in water and waste water

systems.

Substation & transmission line projects:

> New 4.16/ LV substation

. 2003-06: Engaged in a job other than engineering, meanwhile passed

immigration procedures, passed EIT exam, participated in PE Review course

in Cal State- L.A., and passed PE exam.

. 1995-2001: Electrical engineer, promoted to senior electrical engineer,

in IRITEC-Iran International Engineering Company, an engineering company

in the fields of industrial (heavy industries and petrochemical plants),

including water and water treatment systems and pump stations, and

institutional projects, with joint projects with European (German,

Italian, English, Canadian, and Japanese companies. Performed design

of LV and up to 132 kV substations and electrical panels.

Substation & transmission line projects:

> New 230/63 kV substation (partially), 63/6.6 kV substations, 63 and

6.6 transmission lines and cables

> Review of 400 kV GIS basic design, modification of electrical system

with several 63/6.6 kV, 6.6 kV/LV and 33 kV substations and

addition of new substations to the system with 63 and 6.6 kV cables

> Design review of new 4 sets of 250 MW generators and 33, 11, and 6.6

kV substations

> Design review of 20 kV / LV substations and 20 kV transmission lines

> New 132 / 33 kV substation, and several 33/ 6.6 and /LV substations,

132 kV, 33 kV, and 6.6 kV transmission lines

> And several other transmission lines and substations

. 1994-95: Senior electrical engineer in Band - Ab Engineers-Iran, working

on design of water pipe line, pump station, and water treatment plant and

electrical feasibility study of 20 and 63 kV network for two new cities.

Performed design of 20 and 63 kV substations.

Substation & transmission line projects:

> New 63/20 kV and 20 kV/ LV substations and 110 miles of 63 kV

transmission line

> Feasibility study for several 63/20 kV and 63 kV transmission lines

as the distribution system for two cities

. 1993-94: Electrical engineer in PROBA Engineers-Iran, working on design

of MV/MV and MV/LV substations and transmission lines. Participated in

design of 22 sets of 63 kV substations and 150 miles of 63 kV

transmission lines.

Substation & transmission line projects:

> 22 sets of new 63/20 kV substations and 150 miles of 63 kV

transmission line in several sections

Education / Certificates

. Amir-Kabir University of Technology (Tehran Polytechnic), Iran

B.S. in Electrical Power Engineering

. P.E. in Electrical field - California, and OSCA certified

. Additional Courses:

- Variable Frequency Converters/Electrical Drives in Sanati

University of Technology, Iran

- PE review course in California State University, Los Angeles

- AutoCAD, Microsoft administration software (MS Word, Excel,

etc.)

[pic][pic][pic][pic]

Contact this candidate