Engineering Technology
Resume:
**** *********** ********** ********* ************
Compiled by
Marilyn A. Dyrud
Oregon Institute of Technology
Introduction Abbreviations
The 2008 bibliography lists books, articles, and ACP ASEE 2008 Annual Conference
proceedings papers related to engineering Proceedings, June 22-25, 2008, Pittsburgh,
technology education under the following Pennsylvania. Proceedings are available on CD or
headings: administration, aerospace/aviation, at http://www.asee.org/conferences.
architectural, assessment, biomedical/
biotechnology, civil, computers, curriculum, ASME Proceedings of the 2008 ASME
distance education, diversity, electrical/ International Mechanical Engineering Congress
electronics, faculty development, industrial, & Exposition, October 31-November 6, 2008,
industry/government/employers, information Boston, Massachusetts. Proceedings are available
technology instructional technology, at
international, laboratories, liberal studies, http://www.asmeconferences.org/Congress08/Tec
manufacturing, mechanical, nuclear, teaching hnicalProgramOverview.cfm.
methodology, tech prep, technical
communication, and technical graphics. Five CIEC Proceedings of the 2008 Conference for
categories instructional technology, liberal Industry and Education Collaboration, February
studies, teaching methodology, technical 13-15, 2008, New Orleans, Louisiana.
communication, and technical graphics include Proceedings are available on CD.
listings reflecting general technical education
concerns. FIE Proceedings of the 2008 Frontiers in
Education Conference, October 22-25, 2008,
Entries are listed according to area of primary Saratoga Springs, New York. Proceedings are
emphasis, and items that apply to two or more available on CD or at http://www.fie-
academic disciplines are entered under the area of conference.org/fie2008/index.htm. WIP denotes
a work in progress, a short summary of ongoing
major interest. For example, ECET-related items
are included under Electrical/Electronic ; research.
mechatronics papers are listed under
Mechanical. We apologize for any entries that GSW Proceedings of the ASEE 2008 Gulf-
may have been missed or inadvertently placed in Southwest Section Conference, March 26-28,
the wrong category. 2008, Albuquerque, New Mexico. Proceedings
are available on CD.
Contributors
ICEE Proceedings of the 2008 International
Conference on Engineering Education, July 27-
Engineering technology educators interested in
31, 2008, Budapest, Hungary. Proceedings are
being a contributor to the bibliography may
available at
contact Marilyn A. Dyrud, Communication
http://icee2008hungary.net/download/fullp/index.
Department, Oregon Institute of Technology,
html.
3201 Campus Drive, Klamath Falls, OR 97601;
email: *******.*****@***.***; phone:
1
Administration
INTERTECH Proceedings of the
International Conference on Engineering and
Technology Education. March 2-5, 2008, Peruibe Barger, Marilyn et al. Florida Engineering
Technology Forum: A Vehicle for Change.
and Santos, Brazil. Proceedings are available on
CD. ACP.
IJME Proceedings of the 2008 IAJC-IJME Bernstein, Stuart. Developing an
International Conference, November 17-19, Interdisciplinary Service Learning
2008, Nashville, Tennessee. Proceedings are Collaboration amongst University, Community
available at College and High School Programs. CIEC.
http://www.ijme.us/IJME_Conference_2008/prog
Bloom, Joel, and Kathy Kelly. Increasing
ram.htm.
Enrollment of First-Time-Full-Time Freshman
IL/IN Proceedings of the ASEE 2008 Illinois- (FTFTF) in STEM Majors Year Two. ICEE.
Indiana Section Conference, April 3-5, 2008,
Buchanan, Walter W. et al. Administrative and
Terre Haute, Indiana. Proceedings are available
at Educational Issues in Engineering Technology
http://ilin.asee.org/Conference2008/Author.html. with a Global Impact. INTERTECH.
Buchanan, Walter W. et al. Administrative and
NC Proceedings of the ASEE 2008 North
Central Section Conference, March 28-29, 2008, Educational Issues in Engineering Technology
Dayton, Ohio. Proceedings are available at with a Global Impact Part 2. INTERTECH.
http://www.engineering.wright.edu/~asee/Agenda
Colwell, Joy. Developing Tomorrow s
.htm.
Technology Leaders: Issues Related to Master s
NMW Proceedings of the ASEE 2008 North Level Technology Curriculum. ACP.
Midwest Section Conference, October 16-18,
Dandu, Raju, and John DeLeon. Kansas State s
2008, Platteville, Wisconsin. Proceedings are
available at Elite Scholarship Program Enhancing Lives
http://www.ndsu.nodak.edu/asee/conferences/200 through Technology and Engineering. ACP.
8/.
Dudeck, Kenneth, and Wieslaw Grebski. A New
PSW Proceedings of the ASEE 2008 Pacific Vision for Engineering Technology Programs
Southwest Section Conference, March 27-28, to Strengthen Recruitment and Retention.
2008, Flagstaff, Arizona. Proceedings are ACP.
available at
Ferrara, Irene, and Andrew Vavreck. Meeting
http://www.asee.org/activities/organizations/secti
ons/proceedings/PacificSouthwest/2008.cfm. Enrollment Challenges in Engineering
Technology at Penn State Altoona. ACP.
SEE Proceedings of the ASEE 2008
Gehrig, Bruce et al. A Comprehensive and
Southeastern Section Conference, April 6-8,
2008, Memphis, Tennessee. Proceedings are Integrated Approach to Increase Enrollments in
available on CD or at Engineering Technology. ACP.
http://www.icee.usm.edu/icee/conferences/Confer
Genis, Vladimir, and Gerry Marekova. Applied
ence%20Files/ASEE2008.
Engineering Technology Program s
Zone Proceedings of the 2008 ASEE Zone I Curriculum. ACP.
Meeting, March 26-28, 2008, West Point, New
Hill, Warren. Accreditation of Engineering
York. Proceedings are available at
Technology Associate Degree Programs. ACP.
http://www.asee.org/activities/organizations/zone
s/proceedings/zone1/2008Professional.cfm.
2
Hundley, Stephen et al. Enhancing Engagement Weinsier, Philip, and David J. Brown.
in Faculty Governance. ACP. Engineering Technology Education: A
National Picture. IJME. Paper no. 148.
Munukutla, Lakshmi et al. Arizona-Texas
Wolf, Lawrence, and Michael O Hair.
Consortium for Alternative and Renewable
Energy Technologies. ACP. Engineering Technology and the 75th
Anniversary Retrospective of ABET. ACP.
Oh, Jung, and Beverlee Kissick. The Journey to
Build a 21st Century Faculty-Librarian Zoghi, Ban, and Walter W. Buchanan.
Engineering Leadership: An Experimental
Relationship: A Retrospective Case Study
Reflected with Criteria 2E and J. ACP. Approach Using Emotional Intelligence.
INTERTECH.
O Hair, Michael T. New Mission Language for
the Engaged University: Learning, Discovery
and Engagement. CIEC. Aerospace/Aviation
Reid, Kenneth, and P. K. Imbrie. Noncognitive Aungst, Josanne et al. Planning of Non-Routine
Work for Aircraft Scheduled Maintenance.
Characteristics of Incoming Engineering
Students Compared to Incoming Engineering IJME. Paper no. 044.
Technology Students: A Preliminary
Examination. ACP. Baloun, Katie et al. No Hassle Check-in of
Aircraft Customers and Baggage. IJME. Paper
Robertson, John et al. The Technology World Is no. 043.
Changing Rapidly: Can Higher Education
Match the Pace? ACP. Johnson, Mary E., and Sergey Dubikovsky.
Introduction of Lean Six Sigma Principles into
Rose, Andrew, and Norman Voigt. The Role of Aeronautical Engineering Technology
Courses. IJME. Paper no. 047.
Adjunct Faculty in Future Engineering
Education. ACP.
Morrell, Anthony J. et al. Development of Safety
Samples, Jerry. Leadership 103: Leadership in Event Metrics for an Aviation Organization.
Teaching and Pedagogy. ACP. IJME. Paper no. 131.
Sealy, Philip. Rubrics to Samples of Student Ropp, Timothy D. Implementing Safety
Work as a Direct Measure of Individual Management Systems for Aviation into an
Aviation Technology Curriculum. IJME.
Outcome Achievement and Overall Program
Quality. NMW. Paper no. 164.
Setoodehnia, Ali et al. How to Improve Student Ropp, Timothy D., and Brian G. Dillman.
Retention Rates in Science and Technology. Standardized Measures of Safety: Finding
Global Common Ground for Safety Metrics.
Zone.
IJME. Paper no. 029.
Tapper, Jerome, and Francis DiBella. The
Vlasman, Brent et al. Learning Aerospace
Development and Deployment of an
Engineering Technology Curriculum to Combat Design and Manufacturing Processes to
Engineering Globalization. ACP. Demonstrate ABET Program Objectives.
IJME. Paper no. 048.
Verma, Alok. Applying Six Sigma Methodology
to the Admissions Process in Higher
Education. ACP.
3
Balascio, Carmine et al. Nationally Normed
Architectural
Exams for Outcomes Assessment of
Baznik, Gouranga. Employer s Expectations of Engineering Technology Programs and
the Performance of CM Graduates. ACP. Certification of Engineering Technology
Graduates. ACP.
Cowan, Daniel. A Client-Based Assessment
Biney, Paul et al. Development of Performance
Tool for Service Learning Projects. ACP.
Criteria for Assessing Program Outcomes in
Cowan, David. Ditching Digital: The Building Engineering, Engineering Technology &
Computer Science Programs. ACP.
of Physical Miniatures. ACP.
Buhl, Jakob et al. Assessing Impact of New
Davis, Daniel. Partnering with Industry via Your
Advisory Board. FIE. Teaching Methods by Predicting Student
Performance. Zone.
Ding, Suining. Cognitive Mapping in Service
Carpinelli, John et al. A Rubric to Evaluate
Learning and Civic Engagement in a Studio
Standards-Based Lesson Plans and Students
Course with an ADA Accessible Project. ACP.
Achievement of the Standards. ACP.
Haque, Mohammed, and Pallib Desgupta. An
Carson, Jon. Evaluation of Individual
Architectural Walkthrough Using 3D Game
Performance on Group Projects. ACP.
Engine. ACP.
Chin, Robert. Characterizing the Engineering
Haque, Mohammed E., and Pallab Dasgupta.
Architectural/Engineering Visualization Using Technologists: Implications for Program
Assessment. ACP.
Game Engine. GSW.
Cottrell. TC2K and Classroom Assessment: The
Hsu, Kun-jung et al. Exploring the Eco-
Case for Comprehensive Course Assessment in
Pedagogy of an Urban Eco-Tourism Hill Path
Sustaining Continuous Program Improvement.
Design. ACP.
ACP.
Martin, Elizabeth. Education of the Citizen
Cowan, David. A Client-Based Assessment Tool
Architect through Designing Mobile Health
for Service Learning Projects. ACP.
Clinic Concepts. IJME. Paper no. 051.
Das, Nirmal. Assessment and Evaluation of
Nichols, Anne. Using Calibrated Peer Review as
Engineering Technology Program Outcomes
a Teaching Tool for Structural Technology in
Using Direct Measures. ACP.
Architecture. ACP.
DeRuntz, Bruce, and Ron Meier. Identification
Nickolson, Darrell. Merging ADA & LEED to
of Significant Factors and Topics for
Enhance Older Adult Living: A Capstone
Project. ACP. Establishing a Standard Evaluation Instrument
for Six Sigma Black Belt Projects. IJME.
Paper no. 030.
Assessment
Dues, Joseph et al. Assessment for Continuous
Improvement: Embedding in the Culture.
Anitsal, Meral. An Exploratory Assessment of
Journal of Engineering Technology 25, no. 2
Distance and On-Ground Delivery of Business,
(Fall 2008): 10-17.
Math and Engineering Technology Courses.
ACP.
4
Durfee, Jason, and William Loendorf. Using the Learning Objectives to Educational Program
National Society of Professional Engineers Outcomes to ABET Assessment. ACP.
(NSPE) Ethics Examination as an Assessment
Skvarenina, Timothy. Incorporating and
Tool in the Engineering Technology
Curriculum. ACP. Assessing ABET Soft Skills in the Technical
Curriculum. ACP.
G mez, M. Martinez. A Methodology to
Varma, Virendra, and Tina Varma. Using E -
Analyse the Student Feedback Survey of the
Polytechnic University of Valencia (UPV). Portfolios for Program Assessment: Some
Observations. ACP.
ICEE.
Goodson, Carole et al. Student Perceptions of Vavreck, Andrew et al. Analysis of the Results
Academic Honesty in an Electronic Age. ACP. of a Pilot Engineering and Engineering
Technology Student Inventory Survey. ACP.
Higgins, Bonnie. Program Evaluation: Graduate
Wang, Jywhen et al. Enhancing and Assessing
and Employer Perceptions Regarding Job
Preparedness Skills of Design Technology Life Long Learning Skills through Capstone
Graduates. IJME. Paper no. 027. Projects. ACP.
Ketkar, Mohan A., and Nripendra N. Sarker.
Development of Performance Criteria and Biomedical/Biotechnology
Measures for Assessing Program Outcomes in
Engineering Technology Programs. GSW. Genis, V. et al. Environmental Control Plasma
Educational Laboratory. In Plasma Assisted
Lamb, Carol, and David G. Kurtanich. Decontamination of Biological and Chemical
Assessment Process A View from the Agents. Ed. Katie Gibson et al. Rotterdam:
Trenches. ACP. Springer, 2008, pp. 151-8.
Lipscomb, John W., Jr. A Comparison of Exam Kennedy, Chad E. Role-Playing Creates a
Scores between Fully Online and Lecture Valuable Interactive Learning Environment for
Supplement Sections. SEE. Biomedical Engineers and Engineering
Technologists. GSW.
Nripendra, Sarker, and Cajetan M. Akujuobi.
Establishing Multiple Assessment Methods for Kornegay, Alton L. et al. Biotechnology:
Accreditation. GSW. Gearing up to Manufacture Biofuels including
Ethanol and Biodiesel. IJME. Paper no. 012.
Pankowski, Peg. Assessment for Accreditation
and Beyond. PSW. Sprawls, Perry. Evolving Models for Global
Medical Technology Education. FIE.
Pariser, Bertram, and Cyrus Meherji. Data
Management for Outcomes and Assessment.
ACP. Civil
Reid, K. J., and E. M. Cooney. Implementi ng Abaza, Hussein et al. Multi-Media Interactive
Rubrics as Part of an Assessment Plan. The Self-Directed CAD Applications Learning
International Journal of Engineering Education Modules for the Construction Management
24, no. 5 (2008): 893-900. Students. ACP.
Rodriguez-Marek, Esteban et al. Connecting the Aghayere, Abi, and Jason Vigil. Structural Steel
Design A Practice-Oriented Approach. Upper
Dots in Assessment: From Course Student
Saddle River, NJ: Prentice Hall, 2008.
5
Ahn, Yong Han et al. Integrated Sustainable 2008). Available at
Construction: A Course in Construction for http://technologyinterface.nmsu.edu/Spring08/.
Students in the U.S.A. ACP.
Lambrechts, James. When Civil Engineering
Ali, Tarig, and Ali Mehrabian. Towards Technology Is Elevated to Engineering, What
Can Fill the Technology Void? ACP.
Dynamic Land-Use Planning Using Geospatial
Technology: Conceptual Design of a
Collaborative Web-Based GIS. The Leffers, M. Regina et al. The Center for the Built
Technology Interface 9, no. 1 (Fall 2008). Environment at IPFW and the Northeast
Available at Indiana Green Build Coalition and Habitat for
http://technologyinterface.nmsu.edu/Fall08/. Humanity Collaborate to Create a Sustainable
Residential Construction Project. ACP.
Aldridge, Kevin et al. Automated Clay
Conditioning for Foundation (ACCF). The Mehrabian, Ali. The State of the Art Analysis
Technology Interface 9, no. 1 (Fall 2008). and Design of Structures: Application of RISA-
3D. The Technology Interface 9, no. 2 (Spring
Available at
http://technologyinterface.nmsu.edu/Fall08/ . 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Apostoaia, Radu, and Jose Pena. Comparative
Study of the Abrasion Resistance. IL/IN. Mincic, Michael. Transfer Success of Civil
Engineering Technology Degree Community
Bandyopadhayay, Amitabha, and Bala College Graduates to a Bachelor Degree in
Veeramchenei. The Regional Economic Civil Engineering Technology Program. ACP.
Impact of the Proposed Capital Improvement of
Nguyen, Thuy et al. Technology Skill
the South West Sewer District in Suffolk
County A Student-Assisted Project. ACP. Assessment of Construction Students and
Professional Workers. ACP.
Banik, Gouranga. Industry Expectations from
Sener, Erdogan. Zero-Energy and Carbon-
New Construction Engineers and Managers:
Curriculum Improvement. ACP. Neutral Construction: Where and How to Start
Integrating the Concepts into Construction
Benge, Justin et al. Influence of Recycled Education. IL/IN.
Aggregates on Mechanical Properties of High
Performance Concrete. IL/IN. Shaurette, Mark. Implementation of Wireless
Webcam Technology for Construction
Cottrell, David. An Introductory Materials Management Field Trips. ACP.
Course: Making Concrete Stand Up to the
Task. ACP. Sidharta, Sahirman et al. FRP Bridge Deck Life
Cycle Cost Analyzer. Proceedings of the First
Das, Nirmal. A Case Study of Student Learning International Symposium on Life Cycle Civil
in Civil Engineering Technology. ACP. Engineering, July 10-14, 2008, Varenna, Lake
Como, Italy.
Das, Nirmal. Teaching Reinforced Concrete
Design with MathCad Application. ACP. Varma, Virendra. Advances in the Production of
Shop Drawings and Their Impact on
Davis, Daniel. Understanding Construction Constructability. ACP.
Project Relationships. ACP.
Vidalis, Sofia, and Joseph Cecere. A Model
LeBoeuf, Richard L. et al. Using Concrete Partnership between Penn State Harrisburg s
Proportioning to Teach Spreadsheet Modeling. Construction Engineering Technology Program
and the Construction Industry. ACP.
The Technology Interface 9, no. 2 (Spring
6
Wood, William. Temporary Loads during Beasley, Jeffrey S. Networking. 2nd ed. Upper
Construction: Undergraduate Research and Saddle River, NJ: Prentice Hall, 2008.
Course Development. ACP.
Dahlmann, Nina et al. Attractive Sciences
Zaneldin, Essam, and Suleiman Ashur. Using Recruiting and Retention Activities for Women
in Academic CSET Education. ACP.
Spreadsheets as a Tool in Teaching
Construction Management Concepts and
Applications. ACP. Dhariwal, K. et al. The Complete Guide to
Professional Computing. Chicago: ICCP, 2008.
Duvall, Charles, and Joshua Galloway. Reducing
Computers
the Trial and Error Design Method of Single
Board Computer Projects via Automation of
Alagun, Titilope Z., and Shahryar Darayan.
Timing Measurement. CIEC.
Automated Control of Chicken Environment
and Egg Production. GSW.
Evans, Jeffrey et al. Wireless Sensor Network
Allen, Gale R. Communications Technology Design for Flexible Environmental
Monitoring. Journal of Engineering
Learning Opportunities Using LabVIEW-
Controlled RF Equipment. NMW. Technology 25, no. 1 (Spring 2008): 46-52.
Farook, Omer et al. Embedded System Design
Allen, Gale R. Hands-On Component-Level
with Microchip s 16F88 Microcontroller.
Automation Courses for Technology and
Engineering Students. NMW. ACP.
Forsman, David. Computer Applications for
Basta, Alfred and Wolf Halton. Computer
Engineers: Teaching Organizational Problem
Security and Penetration Testing. Clifton Park,
Solving and Checking Skills to Freshmen
NY: Delmar Cengage, 2008.
Engineering Technology Students. ACP.
Attarzadeh, Farrokh. Innovations in Laboratory
Garrett, Jeremy et al. Student Attitudes towards
Development for Computer Engineering
Technology Programs. The Technology the Use of Graphical Programming
Languages. ACP.
Interface 9, no. 1 (Fall 2008). Available at
http://technologyinterface.nmsu.edu/Fall08/ .
Hacker, Thomas J. Eastern Michigan
University Developing a Curriculum for High
Attarzadeh, Farrokh et al. Assessing the
Performance Computing and
Assessments in a Computer Engineering
Cyberinfrastructure Education. CIEC.
Technology Capstone Course. GSW.
Hembroff, Guy C. et al. Filling the Void in
Attarzadeh, Farrokh et al. The Evolution of a
Computer Education: Establishing and
Senior Capstone Course in the Context of a
Developing a Responsive Computer Network
Research-Based University Quality
Engineering and Security Program. IJME.
Enhancement Plan. GSW.
Paper no. 066.
Attarzadeh, Farrokh et al. How the Capstone
Hernandez, Juan et al. Network Controlled Data
Class Students Perceive Their Knowledge
Acquisition Drone. GSW.
Base? GSW.
Hislop, Gregory W. Moving Away from an
Introductory Programming Sequence. WIP.
Attarzadeh, Farrokh et al. The Role of the
FIE.
Teaching Assistants in a Senior Level
Computer Engineering Technology Capstone
Class. GSW.
7
Ibrahim, Ghassan et al. An Experimental Pilot Swain, Nikunja K. et al. Role of Simulation
Wireless Wide Area Network: A Project Based Software in Enhancing Student Learning in
Learning Approach in Radio Frequency Computer Organization and Microcontroller
Course. The Technology Interface 9, no. 2 Courses. IJME. Paper no. 135.
(Spring 2008). Available at
Ulmer, Jeffrey M. Intellectual Property:
http://technologyinterface.nmsu.edu/Spring08/ .
Perspectives from within Corporate America
Jonassen, David et al. Scaffolding Collaborative and the Law. The Technology Interface 9, no.
Design Online. ACP. 2 (Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/.
Koontz, Warren et al. Incorporation of
Wilcox, Daren et al. Embedded Design in a
Broadband Access Technology in a
Sophomore Course. ACP.
Telecommunications Engineering Technology
Program. ACP.
Yaprak, Ece, and Karen Tonso. Real-Time,
Li, Chengcheng et al. Networking Lab Embedded Systems Networking: A Novel Way
Simulation Using Virtual Technologies. ACP. to Develop an Interactive Undergraduate
Course. ACP.
Li, Xiaolong. Development and Application of a
New Curriculum for Computer Networking.
Curriculum
CIEC.
Loker, David. Wireless Sensor Networks Anderson, Robert et al. Using Student
Utilizing the IEEE 802.15 Standard in an ECET Engagement Projects in an Engineering
Curriculum. ACP. Technology Program to Stimulate Regional
Economic Development. SEE.
Lopez, Antonio M. et al. Gender and Race:
Anwar, Sohail, and Eric Granlund. Teaching
Stereotyping, Coping Self-Efficacy and
Collective Self-Esteem in the CSET Design to First Year Engineering and
Undergraduate Pipeline. FIE. Engineering Technology Students: A Case
Study. The Technology Interface 9, no. 2
Martin, Cortney et al. The Earth Sustainability (Spring 2008). Available at
Course Series. ACP. http://technologyinterface.nmsu.edu/Spring08/.
Moreno, Matthew et al. Active Vehicle Water Attarzadeh, Farrokh et al. Situating a Senior
Level Monitoring System. GSW. Project Course in a University QEP Research-
Based Instructional Framework. IJME. Paper
Nelson, Bill et al. Guide to Computer Forensics no. 055.
and Investigations. 3rd ed. Clifton Park, NY:
Anwar, Sohail. An Innovative Undergraduate
Delmar Cengage, 2008.
Nanoscience Technology Program for Adult
Rio-Gutierrez, Fernando. New Progressive Learners. CIEC.
Embedded Design Course for Engineering
Technology. ACP. Barnard, Ken et al. Earth Day Teach-In: A
Model for Industry, Community, and Education
Schneider, Scott. Using Programming Projects Collaboration. ACP.
in an Operating Systems Course as a Capstone
Software Engineering Experience. ACP. Barbieri, E., and W. Fitzgibbon.
Transformational Paradigm for Engineering
and Engineering Technology Education.
Sinn, Richard. Software Security Technologies.
Clifton Park, NY: Delmar Cengage, 2008. IJME.
8
Beasley, Ryan. A New Class Covering Health and Fire Program Fire Alarm System
Care Technologies. ACP. Engineering Course. ACP.
Bellaver, Richard F. Integrating Human Factors Gary, Kevin, ands Harry Koehnemann. The
Software Enterprise at ASU s Polytechnic
Research into a Communications Technology
Program. Campus. PSW.
ICEE.
Genis, Vladimir et al. Capstone Courses for
Birch, John III et al. Integrating Professional Engineering Technology Students. ACP.
Skills into the 21st Century Engineering and
Technical Curriculum. ASME. Paper no. Gomez-Rivas, Alberto, and George Pincus.
Development and Implementation of a General
IMECE 2008-68811.
Course on Analysis of Engineering Networks.
Buchanan, Walter W. et al. The Importance of CIEC.
Networking and Building Relationships to
Gorbet, Rob et al. Impact of Learning
Further Development Activities in an
Engineering Technology Department at a Transformation on Performance in a Cross -
Public University. GSW. Disciplinary Project-Based Course. FIE.
Buck, Jessica L., and Elizabeth McInnis. Beyond Harding, Gene, and Christopher A. Long.
Improving the Curriculum via Directed
the Barriers: The Incorporation of Service
Learning in Technology Programs. SEE. Projects or Research Using Undergraduate
Students. IL/IN.
Craft, Elaine, and Barbara Anderegg. Program
Helps, C. Richard, and Mark Patterson. Keeping
Mentoring a Grant Proposal Project
Development Process for Improvement in Two - Technology Courses Current While Minimizing
Disruption to the Instructional Design. ACP.
Year College Technician Education: Lessons
Learned and Outcomes from a Pilot Project.
Horton, Karen et al. Virtual Preservation: A
ACP.
Unique Applied Research Project in the Virgin
Craft, Elaine et al. Innovative/Exemplary Islands National Park. ACP.
Programs Transforming the Classroom,
Empowering the Teacher and Enriching the Jablokow, Kathryn, and Danielle DeCristoforo.
Student. CIEC. Sorting Out Creativity in Design Assessment.
ACP.
Crossman, Gary et al. A New Bachelor s
Program in Motorsports Technology. ACP. Karunamoorthy, Swami. Seven Steps to
Successful Continuous Improvement of a
Domermuth, David. Innovative Changes That Program. ACP.
Allow Graduates to Compete in the Global
Market Place. CIEC. Khan, Saeed, and Gregory Spaulding. Building
the Largest Cantenna in Kansas: An
Eppes, Tom et al. An Integrative Approach to Interdisciplinary Collaboration between
Graduate and Undergraduate Change. ACP. Engineering Technology Programs. ACP.
Evensen, H. T. et al. The Minor in Microsystems Klein, Peter W. Curriculum Innovation:
and Nanotechnology at UW-Platteville. NMW. Technical Sales. IJME. Paper no. 147.
Franz, Harry. Comparing the Use of Commercial Krupczak, John. Using Insights from Non-
Fire Alarm Control Processors and Engineers to Teach How Things Work in
Introduction to Engineering. NC.
Programmable Logic Controllers in a Safety
9
Krupczak, John, and David Ollis. Technology Mynbaev, Djafar et al. Support of Study on
Courses for Undergraduates: Developing Engineering Technology from Physics and
Standard Models. ACP. Mathematics. ACP.
Krupczak, John et al. A Framework for Nagchaudhuri, Abhijit. Integration Image
Developing Courses on Technology and Analysis Projects in an Introductory
Engineering for All Students. WIP. FIE. Computational Methods Course Using
MATLAB Software Environment. ACP.
Krupczak, John et al. A Framework for
Nagchaudhuri, Abhijit et al. Site Specific
Developing Courses in Engineering and
Technology for Non-Engineers. ACP. Farming, Environmental Concerns, and
Associated Advanced Technologies, Provide a
Kurtanich, David et al. Engineering Platform for Active Learning and Research at a
Technology s Design across the Disciplines. Land Grant University. ACP.
ACP.
Nepal, Birmal, and Jihad Albayyari. An
Loendorf, William, and Terence Geyer. Bridging Advanced Quality Engineering Course for
Technology. ACP.
the Historical Technological Gap between the
Past and the Present in Engineering Technology
Curriculum. ACP. Parmentier, Mary Jane C., and Raji Sundararajan.
A Multidisciplinary Master s Program in
Global Technology and Development. The
Lyons, Harvey I., and David B. Meredith.
Building an Associate Degree in Mining Technology Interface 9, no. 1 (Fall 2008).
Technology. CIEC. Available at
http://technologyinterface.nmsu.edu/Fall08/.
McHale, Donal et al. DETECT: Developing
Pomalaza-Raez, Carlos. Dissemination of
Sustainable Pathways toward Innovative,
Sustainable Collaboration between Four Capstone Design Projects through
Interdisciplinary Collaboration. IL/IN.
Engineering, Design, and Technology
Education Institutions. ACP.
Ramakrishna, Anoop Hanchinamane, and Veda
McReynolds, Kevin. Pervasive Computing in Prakash Galigekere. Hands On Technology
Higher Education: A Smart Classroom Model. Day. NC.
The Technology Interface 9, no. 1 (Fall 2008).
Rosentrater, Kurt, and Elif Kongar. Not Just
Available at
http://technologyinterface.nmsu.edu/Fall08/. Informative, but Necessary: Infusing Green and
Sustainable Topics into Engineering and
Miller, Amy. Thinking Outside the Book or Technology Curricula. ACP.
Why My Students Want to Be Called Big
Drips. ACP. Rosentrater, Kurt, and Jerry Visser. The
Biomass Bandwagon: Three Ideas for
Manno, Anthony, and Kamal Shahrabi. Engineering and Technology Programs to Get
Technology Courses to Attract Non Onboard. ACP.
Technology Students. Zone.
Sarwar, Abu, and John Blake. Teaching
Moaveni, Saeed., and Karen C. Chou. An Mathematics to Engineering Technology
Innovative Approach to a Cross-Disciplinary Students: Moving Math Instruction into the
Senior Design Project. International Journal Department. ACP.
of Modern Engineering 8, no. 2
(Spring/Summer 2008): 62-66.
10
Selig, Gad. Transforming a Technology Anwar, Sohail. Development of an On-Line
Management Master s Degree Curriculum into Introduction to Nanotechnology Course: Issues
and Challenges. ACP.
a Successful Inter-Disciplinary Program for the
21st Century Needs of Global Organizations.
Baptista, Christiane Meiler et al. MSys: An
Zone.
Activities Tracking Tool for E-Learning
Sridhara, B., and Joseph Prince. Some Systems. FIE.
Interesting Engineering Problems with Objects
Azemi, Asad. Enhancement of Traditional and
of Simple Geometry and Relatively Complex
Mathematical Formulations. ACP. Distance Learning through Hybrid E-Learning
Approach. ACP.
Sticklen, Jon, and Mark Urban-Lurain. The
Dolinina, O. et al. Development of Multi-
Relationship of Instructor Ratings with TA
Ratings in High Enrollment, Lecture/Lab Platform System of Distant Learning at
Courses: A Preliminary Study. ACP. Technical University. ICEE.
Verma, Alok. Project Based Activity to Attract Edmonson, Charlie. A Method of Pacing On-
Students to Marine Engineering and Line Courses: Blending Asynchronous
Technology Careers. ASME. Paper no. IMECE Assessments and Recorded Lectures with
Synchronous Lectures. ACP.
2008-67741.
Wanless, Linda et al. To Build a Better Bottle Grzejszczyk, E., and B. Galwas. Evaluation of
the Candidates Skills for Distance Learning
Opener: Interweaving a Project through the
Engineering Technology Curriculum. ACP. Study. ICEE.
Wosczyna-Birch, K., and M. Barger. Flexible Hossain, Akram, and Niaz Latif. Synchronous
Models for Two-Year as Degree Programs. Delivery of Engineering Technology Courses to
a Remote Location Issues and Challenges
Proceedings of the Advanced Technological
Related to Technology and Students
Education Principal Investigators Conference,
Learning. ACP.
Oct. 29-31, Washington, D.C.
Zhu, Jinwen et al. An Innovative Curriculum Hsuing, Steve et al. Design and Develop a Cost
Approach for Expanding Engineering Effective Microcontroller Training System for
Technology Education. The Technology Distance Learning Engineering Students. ACP.
Interface 9, no. 2 (Spring 2008). Available at
Lewis, Vernon. Effective Execution of
http://technologyinterface.nmsu.edu/Spring08/.
Surveying Laboratories in Distance Learning
Zieren, Gregory, and John Blake. Teaching Using Local Mentors. ACP.
Aspects of Technological Literary from a
Historical Perspective. ACP. McDaniel, William L., and Aaron K. Ball.
Distance Learning in Engineering Technology
at Western Carolina University: Celebrating
Success and Looking toward the Future. SEE.
Distance Education
Mehrabian, Ali et al. Crafting Online Exams in
Anitsal, Meral et al. An Exploratory Assessment
Engineering and Technology: Latest
of Distance and On-Ground Delivery of
Challenges, Methodologies, and Trends. ACP.
Business, Math and Engineering Technology
Courses. ACP.
11
Miertschin, Susan, and Cheryl Willis. Using Kowalski, Joan, and Tracie L. Brockhoff. The
FIRSTE Fifteen Years. ACP.
Course Maps to Enhance Navigation of E-
Learning Environments. ACP.
Leite, Pedro, and Jung Oh. An Analysis of
Rajagopal, Chitra. Distance Learning Delivery Successful Minority Students Enrolled in
Technology Degree Programs. ACP.
of a Web-Based Degree in Electrical/
Electronics Engineering Technology, Which
Tolley, Patricia et al. Enhancing Diversity in
Incorporates Hands-On Laboratory
Experiments and Real Time Video. ACP. Engineering Technology: Phase 2 of North
Carolina Junior Engineering Technology
Zia, Omar. E-Learning and E-Teaching: One Society (NCJETS). ACP.
Step Closer to Global University. Proceedings
Walser, Andy. Building Academic Paths in
of the 5th International Conference on Mobile
and Computer Aided Learning. April 16-19, Engineering and Technology for
Underrepresented Students. ACP.
2008, Amman, Jordan.
Zimmerman Lisa, and Gerhard Sprung.
Technology Is Female: How Girls Can Be
Diversity
Motivated to Learn Programming and Take up
Agajanian, Aram et al. Multiple Regression Technical Studies through Adaptations of the
Curriculum, Changes in Didactics, and
Analysis of the Factors That Affect
Optimized Interface Design. ICEE.
Male/Female Enrollment/Retention in
Electronics and Computer Engineering
Technology Programs at a For-Profit
Institution. ACP. Electrical/Electronics
Bilen-Green, Canan et al. Mentoring Young Ahmadian, Mohamad H. Promoting Critical
Girls into Engineering and Technology. ACP. Thinking Skills through a Capstone Course.
GSW.
Birmingham, Stacy, and Mara Wasburn. On or
Alarje, Nasser et al. The Electrical Engineering
Off the Tenure Track: The Work Lives of
Women Engineering and Technology Faculty. Technology Program Outcome Assessment
Process Development and Implementation.
ACP.
ACP.
Bro ov, S. et al. The Increasing Integration of
Allen, Gale. Concept Learning Experiment in
Young Worker s Rate, Especially Woman, into
Research of Complex Environment Protection. Electronics. IL/IN.
ICEE.
Allen, Gale. DSP Communications Experiment.
Foster-Blackwell, Elinor. Successful Strategies IL/IN.
for Educating Students with Disabilities in
Technology Education. IJME. Paper no. 041. Azad, Abul. Design and Development of an
Introductory Digital Electronic Course within
Harris, Kara. Recruitment in an Undergraduate Program. Journal of
Engineering/Technology Teacher Education: Engineering Technology 25, no. 1 (Spring
Factors That Influence Females. ACP. 2008): 26-34.
Kongar, Elif et al. Increasing the Participation of Azemi, Asad. Teaching Electric Circuits Using
Tablet PC and Centra. ACP.
Women in the Engineering and Technical
Services Industry. Zone.
12
Bartonek, Frank et al. Quantifying Quality: A Floyd, Thomas L. Electronic Devices,
Measurement Attempt for Return on Investment Conventional Current Flow Version. 8th ed.
for a Small Electronics Engineering Columbus, OH: Prentice Hall, 2008.
Technology Program. ACP.
Floyd, Thomas L. Electronic Devices, Electronic
Bernadin, Shonda L., and Youakim Al -Kalaani. Flow Version. 8th ed. Columbus, OH: Prentice
An Effective Model for Course-Level Hall, 2008.
Continuous Improvement in an Electrical
Fong, Roger et al. The Shower Zone 350. The
Engineering Technology Communications
Course. SEE. Technology Interface 9, no. 1 (Fall 2008).
Available at
Brey, Barry B. Applying PC18 Microcontrollers: http://technologyinterface.nmsu.edu/Fall08/.
Architecture, Programming, and Interfacing
Franzl, Richard et al. E-Learning Laboratories
Using C and Assembly. Columbus, OH:
Prentice Hall, 2008. for Optical Circuits: Separation of
Imperfections in Technology and Teaching
Cartwright, Kenneth V. Non-Calculus Methodologies. International Journal of
Derivation of the Maximum Power Transfer Modern Engineering 8, no. 2 (Spring/Summer
Theorem. The Technology Interface 9, no. 2 2008): 11-18.
(Spring 2008). Available at
http://technologyinterface.nmsu.edu/Spring08/. Goetsch, David L. The Successful Electronics
Technician. Clifton Park, NY: Delmar
Chacon, Sergio, and Mequaint Moges. Project- Cengage, 2008.
Based Learning in Telecommunications:
An Approach To Teaching New Technologies. Guccione, Sm, and Uros Marjanovic. Automatic
GSW. Identification/RFID Course and Equipment for
Teaching and Research. IJME. Paper no. 170.
Chen, Xuemin et al. Introduction of Freescale
Gui, Liping. PSCAD Simulation in a Power
Microcontrollers into the Electronics and
Computer Technology Curriculum. ACP. Electronics Application Course. The
Technology Interface 9, no. 2 (Spring 2008).
Craig, Walter O., III. Improving Education in Available at
Engineering Technology by Offering Hands -On http://technologyinterface.nmsu.edu/Spring08/.
Processing in a Cleanroom Laboratory for
Nano-Sensor Fabrication. GSW. Hackworth, John. Development of an EET
Lecture Course in iPod Format. ACP.
Dangelo, Daniel et al. Technical Knowledge
Haddad, Ghaith et al. Interactive Electrical
Transfer for Low-Cost Buck-Boost
Converters. ACP. Circuit Tutoring Tool eTutor. SEE.
Dutko, Michael et al. Computer-Controlled Hata, David M. Introduction to Vacuum
Instrumentation Projects by Sophomore-Level Technology. Columbus, OH: Prentice Hall,
EET Students. ACP. 2008.
Everly, James, and Brian Resnick. A PSK31 Hill, Jonathan, and Akram Abu-aisheh.
Educational Optical Fiber Data
Audio Beacon Project Provides a Laboratory
Communications Toolkit. ACP.
Capstone Design Experience in Digital
Communications. ACP.
13
Ibrahim, Ghassan et al. Performance Analysis of Edge Anti-Aliasing Algorithms. International
915 MHZ RFID System Operating in a Journal of Modern Engineering 8, no. 2
Fluorescent Lighting Environment. ACP. (Spring/Summer 2008): 5-10.
Kalaani, Youakim, a et al. Bridging the Gap Lin, Cheng et al. An Integrated Simulation
between Lab and Lecture Using Computer Design with Three-Dimensional Motions and a
Simulation. ACP. Hydraulic Stewart Simulator. ACP.
Kalatunga, Athula, and Mike Bastick. Power Lozano, Albert. Writing Critical Reviews in
Electronics for Energy Efficiency Integrating Technical Courses in a BSEET Program:
Student Perceptions. ACP.
Commercial Drive Development Platforms and
Pumps for Real World Learning. The
Lozano-Nieto, Albert. Incorporating Cost-
Technology Interface 9, no. 2 (Spring 2008).
Available at Efficient Radio Frequency Experiences in
Engineering Technology Programs. The
http://technologyinterface.nmsu.edu/Spring08 /.
Technology Interface 9, no. 1 (Fall 2008).
Kannan, Arunachala Nadar Mada et al. Novel Available at
Technology for Electronics Instruction An http://technologyinterface.nmsu.edu/Fall08/.
Electronics Studio. ACP.
McNally, Helen. Technologies of
Nanotechnology. ACP.
Karunaratne, Muddumage, and Gregory Dick.
Incorporating Basic Design Flow in EET
Curriculum. ACP. Mainoo, Joseph, and Sri Kolla. A Study to
Establish a Master s Degree Program in
Kavianpour, Alireza et al. A Teaching Tool for Electronics and Computer Technology at
Understanding Different Audio Filter. GSW. Bowling Green State University. ACP.
Khan, Ahmed et al. Chess Honing Electronic Mazidi, Mohammed Ali et al. PC Microcontroller
Switching System (C.H.E.S.S. Board): A Case and Embedded Systems: Using Assembly and C
Study of Successful Design and Implementation for PIC18. Columbus, OH: Prentice Hall,
of a Senior Design Project. ACP. 2008.
Khan, Saeed, and John DeLeon. Articulatin
Contact this candidate