Training

Julia's InformationLocation: Austin, TXExperience: 12+ yearsWilling to Relocate: NoWilling to Travel: No TravelCareer Level: StudentWork Status: U.S. CitizenMember Since: 2012-01-13 Helpful Links

-->

*************@*******.***

Education: Diploma

*************@*******.***

TX

High School Diploma - May 1967

Diploma

*************@*******.***

Certificate of Training IPC/WHMA-A-620 Modules 1&2 August 2009

J-STD-001 Certified IPC Specialist Soldered and Electronic Assemblies Nov.2006

IPC-A-610D Electronic Assemblies Certified IPC Specialist Oct.2006

J-STD-001Certified IPC Specialist Assemblies Oct.2006

Xetel Certified Level One soldering Through hole and Surface Mount April 1999

Xetel IPC-A-610 Revision B knowledge training August 1996

Diploma

Work Experience

September 2008-Current RSI-CRI - TX

Assembler

Building a variety of cables

Cutting wires on a wire cutting machine

Crimping wires, both manually and by machine

Counting all wires in each job to make sure that they are sufficient amount .

April 2005-July 2008 Symtx - TX

Quality Inspector

In charge of inspecting incoming material from both private vendors and the manufacturing floor.

Responsible for in-process audits; if material was not suitable it would not pass inspection.

Non-conforming material had to be reworked and re submitted for additional inspection.

When performing inspections all paper work was kept up to date and in order,and current revisions.

Ensured that all work orders were processed and closed in a timely manner.

When work orders are closed, I made sure that they were filed away.

Made sure that purchasing received copies of all rejects that were from vendors.

September 2002 - April 2005 UStx Contract Services, Inc.-Dripping Springs, TX

Quality Inspector

Responsible for inspection of all circuit boards to ensure quality products are in order to ensure that customers receive shipment in a timely manner.

In charge if inspection incoming raw materials, before used by employees.

Ensured that all employees were properly trained to complete tasks.

Filed work order in numerical order and kept up to date records.

Made sure that the correct parts and part values were correct according to customer spec.

Did in-process inspection both before and after wave solder.

Did simple test on some boards, to make sure that they are correct.

November 1994 - September 2002 Xetel - TX

Line Lead Manger

This position was transferred from TN Technology, which was bought out by Xetel.

In charge of running a production line that stuffed circuit boards, tested boards, and shipped out boards to various customers in a timely manner.

Ensured that all parts were available, taking regular inventory of the areas needing parts.

Responsible for ensuring that all personal in my line were accounted for on a daily basis.

Made sure that parts we were using were correct values per specs.

Made sure that all completed worked orders were filed away.

When jobs were completed, I would transfer them to the shipping area.

August 1977-November 1994 TN Technologies - Round Rock, TX

Line Lead Manger

Started a career in electronics by prepping parts, to ensure that they were ready for the production line.

This position granted opportunities to learn how to run the wave solder machine, how to run a silkscreen machine, and how to adjust and prep machines.

Responsible for inspection cables, and reworking cables that were not up to standards.

The main focus of this position was to ensure that the PCB area ran smoothly. The PCB area was responsible for all the circuit boards that the company used and sold to independent vendors.

Made sure that all parts were correct according to customer specs.

Made sure that all paper work was correct revisions

Filed all completed work orders, or made corrections as needed

IPC-A-610 Revision B knowledge training August 1996

Work Experience

September 2008-Current RSI-CRI - TX

Assembler

Building a variety of cables

Cutting wires on a wire cutting machine

Crimping wires, both manually and by machine

Counting all wires in each job to make sure that they are sufficient amount .

April 2005-July 2008 Symtx - TX

Quality Inspector

In charge of inspecting incoming material from both private vendors and the manufacturing floor.

Responsible for in-process audits; if material was not suitable it would not pass inspection.

Non-conforming material had to be reworked and re submitted for additional inspection.

When performing inspections all paper work was kept up to date and in order,and current revisions.

Ensured that all work orders were processed and closed in a timely manner.

When work orders are closed, I made sure that they were filed away.

Made sure that purchasing received copies of all rejects that were from vendors.

September 2002 - April 2005 UStx Contract Services, Inc.-Dripping Springs, TX

Quality Inspector

Responsible for inspection of all circuit boards to ensure quality products are in order to ensure that customers receive shipment in a timely manner.

In charge if inspection incoming raw materials, before used by employees.

Ensured that all employees were properly trained to complete tasks.

Filed work order in numerical order and kept up to date records.

Made sure that the correct parts and part values were correct according to customer spec.

Did in-process inspection both before and after wave solder.

Did simple test on some boards, to make sure that they are correct.

November 1994 - September 2002 Xetel - TX

Line Lead Manger

This position was transferred from TN Technology, which was bought out by Xetel.

In charge of running a production line that stuffed circuit boards, tested boards, and shipped out boards to various customers in a timely manner.

Ensured that all parts were available, taking regular inventory of the areas needing parts.

Responsible for ensuring that all personal in my line were accounted for on a daily basis.

Made sure that parts we were using were correct values per specs.

Made sure that all completed worked orders were filed away.

When jobs were completed, I would transfer them to the shipping area.

August 1977-November 1994 TN Technologies - Round Rock, TX

Line Lead Manger

Started a career in electronics by prepping parts, to ensure that they were ready for the production line.

This position granted opportunities to learn how to run the wave solder machine, how to run a silkscreen machine, and how to adjust and prep machines.

Responsible for inspection cables, and reworking cables that were not up to standards.

The main focus of this position was to ensure that the PCB area ran smoothly. The PCB area was responsible for all the circuit boards that the company used and sold to independent vendors.

Made sure that all parts were correct according to customer specs.

Made sure that all paper work was correct revisions

Filed all completed work orders, or made corrections as needed

Julia Ann Porfirio

*************@*******.***

Education:

TX

High School Diploma - May 1967

Certificate of Training IPC/WHMA-A-620 Modules 1&2 August 2009

J-STD-001 Certified IPC Specialist Soldered and Electronic Assemblies Nov.2006

IPC-A-610D Electronic Assemblies Certified IPC Specialist Oct.2006

J-STD-001Certified IPC Specialist Assemblies Oct.2006

Xetel Certified Level One soldering Through hole and Surface Mount April 1999

Xetel IPC-A-610 Revision B knowledge training August 1996

Work Experience

September 2008-Current RSI-CRI - TX

Assembler

Building a variety of cables

Cutting wires on a wire cutting machine

Crimping wires, both manually and by machine

Counting all wires in each job to make sure that they are sufficient amount .

April 2005-July 2008 Symtx - TX

Quality Inspector

In charge of inspecting incoming material from both private vendors and the manufacturing floor.

Responsible for in-process audits; if material was not suitable it would not pass inspection.

Non-conforming material had to be reworked and re submitted for additional inspection.

When performing inspections all paper work was kept up to date and in order,and current revisions.

Ensured that all work orders were processed and closed in a timely manner.

When work orders are closed, I made sure that they were filed away.

Made sure that purchasing received copies of all rejects that were from vendors.

September 2002 - April 2005 UStx Contract Services, Inc.-Dripping Springs, TX

Quality Inspector

Responsible for inspection of all circuit boards to ensure quality products are in order to ensure that customers receive shipment in a timely manner.

In charge if inspection incoming raw materials, before used by employees.

Ensured that all employees were properly trained to complete tasks.

Filed work order in numerical order and kept up to date records.

Made sure that the correct parts and part values were correct according to customer spec.

Did in-process inspection both before and after wave solder.

Did simple test on some boards, to make sure that they are correct.

November 1994 - September 2002 Xetel - TX

Line Lead Manger

This position was transferred from TN Technology, which was bought out by Xetel.

In charge of running a production line that stuffed circuit boards, tested boards, and shipped out boards to various customers in a timely manner.

Ensured that all parts were available, taking regular inventory of the areas needing parts.

Responsible for ensuring that all personal in my line were accounted for on a daily basis.

Made sure that parts we were using were correct values per specs.

Made sure that all completed worked orders were filed away.

When jobs were completed, I would transfer them to the shipping area.

August 1977-November 1994 TN Technologies - Round Rock, TX

Line Lead Manger

Started a career in electronics by prepping parts, to ensure that they were ready for the production line.

This position granted opportunities to learn how to run the wave solder machine, how to run a silkscreen machine, and how to adjust and prep machines.

Responsible for inspection cables, and reworking cables that were not up to standards.

The main focus of this position was to ensure that the PCB area ran smoothly. The PCB area was responsible for all the circuit boards that the company used and sold to independent vendors.

Made sure that all parts were correct according to customer specs.

Made sure that all paper work was correct revisions

Filed all completed work orders, or made corrections as needed

Julia Ann Porfirio

*************@*******.***

Education:

TX

High School Diploma - May 1967

Certificate of Training IPC/WHMA-A-620 Modules 1&2 August 2009

J-STD-001 Certified IPC Specialist Soldered and Electronic Assemblies Nov.2006

IPC-A-610D Electronic Assemblies Certified IPC Specialist Oct.2006

J-STD-001Certified IPC Specialist Assemblies Oct.2006

Xetel Certified Level One soldering Through hole and Surface Mount April 1999

Xetel IPC-A-610 Revision B knowledge training August 1996

Work Experience

September 2008-Current RSI-CRI - TX

Assembler

Building a variety of cables

Cutting wires on a wire cutting machine

Crimping wires, both manually and by machine

Counting all wires in each job to make sure that they are sufficient amount .

April 2005-July 2008 Symtx - TX

Quality Inspector

In charge of inspecting incoming material from both private vendors and the manufacturing floor.

Responsible for in-process audits; if material was not suitable it would not pass inspection.

Non-conforming material had to be reworked and re submitted for additional inspection.

When performing inspections all paper work was kept up to date and in order,and current revisions.

Ensured that all work orders were processed and closed in a timely manner.

When work orders are closed, I made sure that they were filed away.

Made sure that purchasing received copies of all rejects that were from vendors.

September 2002 - April 2005 UStx Contract Services, Inc.-Dripping Springs, TX

Quality Inspector

Responsible for inspection of all circuit boards to ensure quality products are in order to ensure that customers receive shipment in a timely manner.

In charge if inspection incoming raw materials, before used by employees.

Ensured that all employees were properly trained to complete tasks.

Filed work order in numerical order and kept up to date records.

Made sure that the correct parts and part values were correct according to customer spec.

Did in-process inspection both before and after wave solder.

Did simple test on some boards, to make sure that they are correct.

November 1994 - September 2002 Xetel - TX

Line Lead Manger

This position was transferred from TN Technology, which was bought out by Xetel.

In charge of running a production line that stuffed circuit boards, tested boards, and shipped out boards to various customers in a timely manner.

Ensured that all parts were available, taking regular inventory of the areas needing parts.

Responsible for ensuring that all personal in my line were accounted for on a daily basis.

Made sure that parts we were using were correct values per specs.

Made sure that all completed worked orders were filed away.

When jobs were completed, I would transfer them to the shipping area.

August 1977-November 1994 TN Technologies - Round Rock, TX

Line Lead Manger

Started a career in electronics by prepping parts, to ensure that they were ready for the production line.

This position granted opportunities to learn how to run the wave solder machine, how to run a silkscreen machine, and how to adjust and prep machines.

Responsible for inspection cables, and reworking cables that were not up to standards.

The main focus of this position was to ensure that the PCB area ran smoothly. The PCB area was responsible for all the circuit boards that the company used and sold to independent vendors.

Made sure that all parts were correct according to customer specs.

Made sure that all paper work was correct revisions

Filed all completed work orders, or made corrections as needed

Contact this candidate